Jump to content

Sprint LTE Coverage Maps via Sensorly


Recommended Posts

On 1/9/2019 at 12:56 PM, jamesinclair said:

Just read through the google app store reviews and it looks like the app died 4 months ago.

 

Wish I hadnt wasted my time.

If that's the case and someone can confirm, that would be very helpful to those of us that try to help fill out map coverage.   If not sensorly, I am sure there is or can be another to pick up the slack (albeit from scratch)

Link to comment
Share on other sites

11 minutes ago, JohnHovah said:

If that's the case and someone can confirm, that would be very helpful to those of us that try to help fill out map coverage.   If not sensorly, I am sure there is or can be another to pick up the slack (albeit from scratch)

That's funny the link is alive and well, my sprint rewards

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
2 hours ago, mattp said:

is any one still in this topic 

what is the data usage of the app any way to limit it just to wifi i am on a limit data place becaser i doint want to speed much mony for data 

Most of us have abandoned ship because it does not get recorded into the main map from many phones.  Root metrics hexagon based coverage maps or cell mapper (if you are in a non spreadsheet market) are recommended.  SCP Pro recommended for active spreadsheet markets.  Most have ways to defer sending data which can then be done over WiFi.

  • Like 2
Link to comment
Share on other sites

36 minutes ago, dkyeager said:

Most of us have abandoned ship because it does not get recorded into the main map from many phones.  Root metrics hexagon based coverage maps or cell mapper (if you are in a non spreadsheet market) are recommended.  SCP Pro recommended for active spreadsheet markets.  Most have ways to defer sending data which can then be done over WiFi.

Agreed. I gave up on Sensorly when it stopped recording and they stopped responding to me.

I use the RootMetrics App regularly in the DC Area and up in Bethesda. Mapped a number of hexes around Downtown DC the other day. Saw some substantial improvements and turned a bunch of hexes darker blue with faster speed tests. Eliminated a few orange hexes as well. Reported the slow areas in the My Sprint App. Great way to get more steps in! 😀

  • Like 1
Link to comment
Share on other sites

3 minutes ago, RedSpark said:

Agreed. I gave up on Sensorly when it stopped recording and they stopped responding to me.

I use the RootMetrics App regularly in the DC Area and up in Bethesda. Mapped a number of hexes around Downtown DC the other day. Saw some substantial improvements and turned a bunch of hexes darker blue with faster speed tests. Eliminated a few orange hexes as well. Reported the slow areas in the My Sprint App. Great way to get more steps in! 😀

wow you much have lot of mony i can't aford to do sped test on the cell network i pay per mb it is the only plan i can aford i may pay about a mont or 2 of regular unlimited  over a whole year 

Link to comment
Share on other sites

30 minutes ago, mattp said:

wow you much have lot of mony i can't aford to do sped test on the cell network i pay per mb it is the only plan i can aford i may pay about a mont or 2 of regular unlimited  over a whole year 

I'm on an Unlimited Freedom family plan with 7 lines and a $5/month Corporate discount for each line, so my overall cost is pretty good.

Unlimited Basic is $60/Month with AutoPay/eBill.

The 2 GB plan is $40/Month with AutoPay/eBill.

Sprint offers $5/month Corporate Discount, but if you're a member of a Credit Union, check this out: https://www.lovemycreditunion.org/sprintcreditunionmembercashrewards

  • Like 1
Link to comment
Share on other sites

2 hours ago, RedSpark said:

I'm on an Unlimited Freedom family plan with 7 lines and a $5/month Corporate discount for each line, so my overall cost is pretty good.

Unlimited Basic is $60/Month with AutoPay/eBill.

The 2 GB plan is $40/Month with AutoPay/eBill.

Sprint offers $5/month Corporate Discount, but if you're a member of a Credit Union, check this out: https://www.lovemycreditunion.org/sprintcreditunionmembercashrewards

still it is more then what i am paying a year for tello as long as i use the phone ever 3 month which is not a isuse i just pay for what i use it could be as low as 10$ for the whole year i think some where around 50$ i use only about 200mb a month and the odd tex mesage  her or there most time i am on wifi 

  • Like 2
Link to comment
Share on other sites

22 minutes ago, mattp said:

still it is more then what i am paying a year for tello as long as i use the phone ever 3 month which is not a isuse i just pay for what i use it could be as low as 10$ for the whole year i think some where around 50$ i use only about 200mb a month and the odd tex mesage  her or there most time i am on wifi 

Wow. That’s a completely different usage pattern. Sounds like it works for you.

  • Like 1
Link to comment
Share on other sites

1 hour ago, RedSpark said:

Wow. That’s a completely different usage pattern. Sounds like it works for you.

yep my family is a small user we doint like cell phone bill get clsoe to size of a second motorage it is evne a some what old cell phone that i full own 

Link to comment
Share on other sites

  • 5 months later...

Hello, anyone else not seeing their map results show up on the Sensorly maps? Is it because I am using the iPhone App?

I keep Sensorly open and Map the same trip over and over again.


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

1 hour ago, techfranz said:

Hello, anyone else not seeing their map results show up on the Sensorly maps? Is it because I am using the iPhone App?

I keep Sensorly open and Map the same trip over and over again.
 

Sensorly appears to have died (see above).

  • Like 1
Link to comment
Share on other sites

4 hours ago, techfranz said:

I wishthere was an IOS version of Cellmapper, but I will try Rootmetrics and maybe Open Signal.

I really enjoy using Rootmetrics on iOS.

Link to comment
Share on other sites

If you are driving about 45 mph how do you make sure the Rootmetrics APP is Harvesting Data?

Do you need to run continuous tests or just have Map View open?

Also what is the average processing time for the data?

Link to comment
Share on other sites

Go into the App settings and make sure that the background “Baseline Data Collection” toggle is enabled and set to upload over any network. This updates the “Best Technology Found” Map Layer in the background as you travel.

You can also run speed tests continuously for the “Fastest Speed Found” Map Layer. This is under the speed test settings. I’m not sure how speeds tests are counted across the hexes. I believe that download and upload data results are treated separately, such that you can have a download result in one hex and an upload in another hex from a single test cycle, if you’re traveling. I’m not sure if downloads and uploads extend across hexes, such that a download result will count for multiple hexes.

I’ve seen hexes update with my speed tests within a couple hours. If a hex has no data points, I believe it takes a few speed tests to get results registered on the “Fastest Speed Found” Map Layer.

I believe these speed tests also apply to the “Best Technology Found” layer as well.

If you plan to run continuous speed tests in the App while traveling, you should do it while your device is plugged into a car charger or plugged into an external battery pack.

  • Like 1
Link to comment
Share on other sites

1 hour ago, RedSpark said:

Go into the App settings and make sure that the background “Baseline Data Collection” toggle is enabled and set to upload over any network. This updates the “Best Technology Found” Map Layer in the background as you travel.

You can also run speed tests continuously for the “Fastest Speed Found” Map Layer. This is under the speed test settings. I’m not sure how speeds tests are counted across the hexes. I believe that download and upload data results are treated separately, such that you can have a download result in one hex and an upload in another hex from a single test cycle, if you’re traveling. I’m not sure if downloads and uploads extend across hexes, such that a download result will count for multiple hexes.

I’ve seen hexes update with my speed tests within a couple hours. If a hex has no data points, I believe it takes a few speed tests to get results registered on the “Fastest Speed Found” Map Layer.

I believe these speed tests also apply to the “Best Technology Found” layer as well.

If you plan to run continuous speed tests in the App while traveling, you should do it while your device is plugged into a car charger or plugged into an external battery pack.

Thanks!

Link to comment
Share on other sites

1 hour ago, techfranz said:

Thanks!

You’re welcome!

Doing speed tests and network mapping  while walking around town is a great way to get exercise and explore new areas. It’s also pretty cool seeing how Sprint’s improved in certain areas.

If you experience slow speeds when testing in an area, you should report the issue in the My Sprint App.

Link to comment
Share on other sites

Well I am going to give up on mapping with Rootmetrics and Open Signal. I wonder if they don’t publish results when a user has a VPN or is using Sprint VoLTE. No sense wasting a bunch of time on mapping a Network if the results don’t end up on the map.

Link to comment
Share on other sites

Well I am going to give up on mapping with Rootmetrics and Open Signal. I wonder if they don’t publish results when a user has a VPN or is using Sprint VoLTE. No sense wasting a bunch of time on mapping a Network if the results don’t end up on the map.

A VPN will skew the results. You should not have a VPN on whole doing speed test mapping. VoLTE will not matter, they operate on different EUTRA sessions https://s4gru.com/entry/439-sprints-casting-call-of-voice-over-actors-an-in-depth-analysis-of-volte-calling-and-vowifi/ it shouldn't even be able to tell that you have VoLTE on. 

That being said, if you're on an active VoLTE call, then that may affect things. Recently, Sprint started preferring dropping to band 26 during tower handoffs while on a VoLTE call. So a call may start out on B41, but if you're moving, when it hands off to the next tower it often switches to B26. This improves VoLTE performance and quality, but will result in slower data speeds and showing B26 available instead of b25 or b41 in your mapping. Congestion on B26 has no effect at all on VoLTE calls, but will be reflected in speed tests performed while on the call

 

Sent from my Pixel 3 XL using Tapatalk

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Excuse my rookie comments here, but after enabling *#73#, it seems that the rainbow sim V2? requires n70 (I turned it off along with n71 - was hoping to track n66) to be available else it switches to T-Mobile.  So this confirms my suspicion that you need to be close to a site to get on Dish.  Have no idea why they don't just use plmn. To test, I put it into a s21 ultra, rebooted twice, came up on T-Mobile (no n70 on s21).  Tried to manually register on 313340, but it did not connect (tried twice). I am on factory unlocked firmware but used a s22 hack to get *#73# working.  Tried what you were suggesting with a T-Mobile sim partially installed, but that was very unstable with Dish ( I think they had figured that one out).  [edit: and now I see Boost sent me a successful device swap notice which says I can now begin to use my new device.  Sigh.  Will try again later and wait for this message - too impatient.]
    • Hopefully this indicates T-Mobile hasn't completely abandoned mmwave and/or small cells? But then again this is the loop, so take that as you will. Hopefully now that most macro activity is done (besides rural colo/builds), they will start working on small cells.   
    • This has been approved.. https://www.cnet.com/tech/mobile/fcc-approves-t-mobiles-deal-to-purchase-mint-mobile/  
    • In the conference call they had two question on additional spectrum. One was the 800 spectrum. They are not certain what will happen, thus have not really put it into their plans either way (sale or no sale). They do have a reserve level. Nationwide 800Mhz is seen as great for new technologies which I presume is IOT or 5g slices.  T-Mobile did not bite on use of their c-band or DOD.  mmWave rapidly approaching deadlines not mentioned at all. FWA brushes on this as it deals with underutilized spectrum on a sector by sector basis.  They are willing to take more money to allow FWA to be mobile (think RV or camping). Unsure if this represents a higher priority, for example, FWA Mobile in RVs in Walmart parking lots working where mobile phones need all the capacity. In terms of FWA capacity, their offload strategy is fiber through joint ventures where T-Mobile does the marketing, sales, and customer support while the fiber company does the network planning and installation.  50%-50% financial split not being consolidated into their books. I think discussion of other spectrum would have diluted the fiber joint venture discussion. They do have a fund which one use is to purchase new spectrum. Sale of the 800Mhz would go into this. It should be noted that they continue to buy 2.5Ghz spectrum from schools etc to replace leases. They will have a conference this fall  to update their overall strategies. Other notes from the call are 75% of the phones on the network are 5g. About 85% of their sites have n41, n25, and n71, 90% 5g.  93% of traffic is on midband.  SA is also adding to their performance advantage, which they figure is still ahead of other carriers by two years. It took two weeks to put the auction 108 spectrum to use at their existing sites. Mention was also made that their site spacing was designed for midrange thus no gaps in n41 coverage, while competitors was designed for lowband thus toggles back and forth for n77 also with its shorter range.  
    • The manual network selection sounds like it isn't always scanning NR, hence Dish not showing up. Your easiest way to force Dish is going to be forcing the phone into NR-only mode (*#*#4636#*#* menu?), since rainbow sims don't support SA on T-Mobile.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...