Jump to content

Marcelo Claure, Town Hall Meetings, New Family Share Pack Plan, Unlimited Individual Plan, Discussion Thread


joshuam

Recommended Posts

Sprint definitely has work to do but they are improving. However, they should set their sights on being a AT&T competitor based on these results.

http:// https://opensignal.com/blog/2018/03/15/the-4g-battle-continues-between-t-mobile-and-verizon/


Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Sprint definitely has work to do but they are improving. However, they should set their sights on being a AT&T competitor based on these results.

http:// https://opensignal.com/blog/2018/03/15/the-4g-battle-continues-between-t-mobile-and-verizon/


Sent from my iPhone using Tapatalk
Yet TMO did what Sprint should have done.

Sent from my XT1635-02 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Yet TMO did what Sprint should have done.

Sent from my XT1635-02 using Tapatalk


Yea. But I have to wonder. Even with 5G will anyone really care to much and the focus will still be on Verizon and T-Mobile going head to head?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites


Yea. But I have to wonder. Even with 5G will anyone really care to much and the focus will still be on Verizon and T-Mobile going head to head?


Sent from my iPhone using Tapatalk
If Sprint can knock AT&T the fourth place eventually that would be absolutely fantastic. I'm tired of AT&T being in third place.

Sent from my LG-H932 using Tapatalk

  • Like 1
Link to comment
Share on other sites

1 hour ago, Paynefanbro said:

They could pass AT&T in a day if they would just turn on 4x4MIMO and 256QAM... ???

We’ve already got 4x4 on L1900 up in Seattle as Sprint only runs one L1900 carrier and three CDMA carriers. Additionally, 256QAM (for all bands) is ready to go in Samsung markets — I’m not sure what the hold up is. 

Link to comment
Share on other sites

13 minutes ago, RAvirani said:

We’ve already got 4x4 on L1900 up in Seattle as Sprint only runs one L1900 carrier and three CDMA carriers. Additionally, 256QAM (for all bands) is ready to go in Samsung markets — I’m not sure what the hold up is. 

How are the speeds on B25 4x4 with only a 5Mhz wide carrier?

Link to comment
Share on other sites

19 minutes ago, nexgencpu said:

How are the speeds on B25 4x4 with only a 5Mhz wide carrier?

We have 10x10 L1900 which is soon to be 15x15 (the PCS C4 block is currently owned by Sprint but completely unused). Performance is great — the qrxlevmin value for L1900 is -125 and throughput is decent even down to those signal levels. 

Combine the PCS network with most sites running 2-6 L2500 carriers and the LTE network is phenomenal. A majority of our sites do not have 800 MHz equipment although we are slowly but surely seeing upgrades to the new KMW hexadecaport antennas (4x4 800, 4x4 1900 and 8x8 2500). 

Unfortunately, these new antennas coverage/range is not as good as that of the PCS-only equipment most of our sites today have, so new L800 coverage feels very similar to old L1900 coverage. That being said, the L800 qrxlevmin is very high (-118 I believe), so when they drop that down to a lower signal level, maybe we’ll start to better see the benifits of L800. 

Link to comment
Share on other sites

7 minutes ago, RAvirani said:

We have 10x10 L1900 which is soon to be 15x15 (the PCS C4 block is currently owned by Sprint but completely unused). Performance is great — the qrxlevmin value for L1900 is -125 and throughput is decent even down to those signal levels. 

Combine the PCS network with most sites running 3-6 L2500 carriers and the LTE network is phenomenal. A majority of our sites do not have 800 MHz equipment although we are slowly but surely seeing upgrades to the new KMW hexadecaport antennas (4x4 800, 4x4 1900 and 8x8 2500). 

Unfortunately, these new antennas coverage/range is not as good as that of the PCS-only equipment most of our sites today have, so new L800 coverage feels very similar to old L1900 coverage. That being said, the L800 qrxlevmin is very high (-118 I believe), so when they drop that down to a lower signal level, maybe we’ll start to better see the benifits of L800. 

Awesome to hear, but unfortunately we have been "blessed" by ALU here, so we just have to be patient in hopes that Nokia finally gets a grasp on it all moving forward.

Link to comment
Share on other sites

4 minutes ago, nexgencpu said:

Awesome to hear, but unfortunately we have been "blessed" by ALU here, so we just have to be patient in hopes that Nokia finally gets a grasp on it all moving forward.

You’re in the New York market, right? Aren’t you guys getting tons of small cells and strand mounts? How are those?

Link to comment
Share on other sites

Sprint definitely has work to do but they are improving. However, they should set their sights on being a AT&T competitor based on these results.

http:// https://opensignal.com/blog/2018/03/15/the-4g-battle-continues-between-t-mobile-and-verizon/


Sent from my iPhone using Tapatalk
I won't use opensignal until sprint rolls out volte in the fall. I still use my phone to actually make calls. On my average day I am connected to LTE 100% of the time but because of phone usage open signal says it's around 85%.

Sent from my 2PYB2 using Tapatalk

Link to comment
Share on other sites

I won't use opensignal until sprint rolls out volte in the fall. I still use my phone to actually make calls. On my average day I am connected to LTE 100% of the time but because of phone usage open signal says it's around 85%.

Sent from my 2PYB2 using Tapatalk

Do you all see the lastest BGR article. VZW and Tmobile are the only networks that matter anymore?

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

11 minutes ago, Tengen31 said:

Do you all see the lastest BGR article. VZW and Tmobile are the only networks that matter anymore?

Sent from my SM-G950U using Tapatalk
 

The real question is...

Does BGR matter anymore? If ever...;)

  • Like 6
  • Love 2
  • Haha 1
Link to comment
Share on other sites

9 hours ago, RAvirani said:

We have 10x10 L1900 which is soon to be 15x15 (the PCS C4 block is currently owned by Sprint but completely unused). 

Stuff like this is what frustrates me the most with Sprint. They have all these options for improving their Network but they just don't act in a timely manner.

  • Like 3
  • Sad 1
Link to comment
Share on other sites

14 minutes ago, greenbastard said:

Stuff like this is what frustrates me the most with Sprint. They have all these options for improving their Network but they just don't act in a timely manner.

Yeah Samsung equipment received a software upgrade allowing 15x15 L1900 a while back — I am not sure as to why they aren’t turning it on...

Link to comment
Share on other sites

Yeah Samsung equipment received a software upgrade allowing 15x15 L1900 a while back — I am not sure as to why they aren’t turning it on...
My question is also why does it take so long in cities with 15x15 to get on all towers? It's been a year since the Orlando FL got it and from what I've heard their is still some 5x5 left.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

This is from Shentel's recent earnings call:

"As I have discussed before, our wireless customers are twice as likely to churn if they live in a county on the parameter [perimeter] of our network

The reason is that for many of our customers their community of interest is outside of our network. So, they often travel into the Sprint network areas, they don't have the quality of service that Sprint provides in the urban areas."

This is very true where I live which borders Loudoun County - where Sprint signal goes to die. (Clarke, and Frederick are in Shentel's footprint).

Link to comment
Share on other sites

54 minutes ago, Tengen31 said:

My question is also why does it take so long in cities with 15x15 to get on all towers? It's been a year since the Orlando FL got it and from what I've heard their is still some 5x5 left.

Sent from my SM-G950U using Tapatalk
 

Sites that use RF combiners have a bandwidth limitation, which is why some sites may still be on 5x5 L1900 even as the rest of the market has moved to 15x15.

When 10x10 was first turned on in Seattle, every tower got it at the same time except for those that were not physically able to run 10x10. 

Link to comment
Share on other sites

Sites that use RF combiners have a bandwidth limitation, which is why some sites may still be on 5x5 L1900 even as the rest of the market has moved to 15x15.

When 10x10 was first turned on in Seattle, every tower got it at the same time except for those that were not physically able to run 10x10. 

Ok. What's the reason in cities where 10x10 is possible but that City doesn't have it. Example Rochester Minnesota now has the F Block but, it's not being used

 

Sent from my SM-G950U using Tapatalk

 

 

 

Link to comment
Share on other sites

Just now, Tengen31 said:

Ok. What's the reason in cities where 10x10 is possible but that City doesn't have it. Example Rochester Minnesota now has the F Block but, it's not being used

 

Sent from my SM-G950U using Tapatalk

 

 

 

Sprint assesses network usage before refarming spectrum to LTE. If CDMA usage is still high, there’s a low chance of more LTE spectrum coming on line. It’s also important to note that the equipment has limitations regarding the number of separate carriers it can run as well as the total bandwidth. 

Link to comment
Share on other sites

1 hour ago, Jones said:

This is from Shentel's recent earnings call:

"As I have discussed before, our wireless customers are twice as likely to churn if they live in a county on the parameter [perimeter] of our network

The reason is that for many of our customers their community of interest is outside of our network. So, they often travel into the Sprint network areas, they don't have the quality of service that Sprint provides in the urban areas."

This is very true where I live which borders Loudoun County - where Sprint signal goes to die. (Clarke, and Frederick are in Shentel's footprint).

This is really sad. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...