Jump to content

Network Vision/LTE - Northern Jersey Market


hihater

Recommended Posts

I know the Sprint Tower by me doesn't have LTE When likely an issue with the landlord or the township single voice Improvement either there's no SMR except for a couple Towers nope not even close to me

 

Sent from my SM-N910T using Tapatalk

 

I was under the impression that 800 voice was active on almost all the sites as well.

Link to comment
Share on other sites

I was under the impression that 800 voice was active on almost all the sites as well.

No 800 voice is not even active here on the site that Services my block so I think it's because it stealth site

 

Sent from my SM-N910T using Tapatalk

Link to comment
Share on other sites

No 800 voice is not even active here on the site that Services my block so I think it's because it stealth site

 

Sent from my SM-N910T using Tapatalk

Meaning across the market, not just your specific site.

Link to comment
Share on other sites

  • 2 months later...

My speeds in New Brunswick have really slowed down over the past 2 weeks

Seems to be going backwards. Sprint supposedly "optimized" my area and now its worse. After creating a ticket and them looking into it, no change can be made cause it would cause a greater impact. This is for voice.

Link to comment
Share on other sites

Seems to be going backwards. Sprint supposedly "optimized" my area and now its worse. After creating a ticket and them looking into it, no change can be made cause it would cause a greater impact. This is for voice.

sprint site upgrades have slowed here !

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • 9 months later...

Dusting this thread off.

 

Connected to 2XCA B25 in Union City. Speeds increased substantially. From 2-3mb to over 20mb!

Not bad...its great they are getting better.

 

Sent from my Pixel XL using Tapatalk

Link to comment
Share on other sites

  • 1 month later...

Went shopping in Bergen county and connected to quite a few 3xCA, speeds from 2-30mb deep indoor of target and Walmart and 20-60mb outdoors in crowded shopping centers.

It's very pretty fast

 

Sent from my Pixel XL using Tapatalk

Link to comment
Share on other sites

  • 8 months later...
Looks like Clear 3xCA is spreading in Northern NJ. Hit a couple sites in Jersey City, good speeds (30-40mbs) during rush hour.
 
Lucky you LOL here in Central Jersey I don't even get three carrier aggregation. I just got two carrier aggregation

Sent from my LG-H932 using Tapatalk

Link to comment
Share on other sites

3 hours ago, danlodish345 said:

Lucky you LOL here in Central Jersey I don't even get three carrier aggregation. I just got two carrier aggregation

Sent from my LG-H932 using Tapatalk
 

Not so lucky, I live 10 blocks from 3xCA locations, seems like a possible contiguous spectrum issue (or lack thereof)

Link to comment
Share on other sites

Not so lucky, I live 10 blocks from 3xCA locations, seems like a possible contiguous spectrum issue (or lack thereof)
I feel that it might be a continuous Spectrum issue. Well this no 3 carrier aggregation by me at all. So I'm waiting to see what happens

Sent from my LG-H932 using Tapatalk

Link to comment
Share on other sites

  • 4 months later...
  • 4 weeks later...
2 hours ago, ingenium said:
Found a ton of the strand mounts from the Altice partnership in your market. They're everywhere around Saddle River.

Sent from my Pixel 2 XL using Tapatalk

 

The tower near me which is a very big multi-carrier tower finally went from 5 megahertz up to 10 secondary carrier178ebe1c0a3b9deec56f99b85e45a891.jpg

Sent from my SM-N960U1 using Tapatalk
 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...