Jump to content

Fastest 3g speeds ever seen?


Recommended Posts

Fastest I've seen was 3Mbps at 2AM and I was a 5 minute drive from the tower in Brooklyn. The fastest the I have seen mid day was 2.4 Mbps in Battery Park City.

You have a speed test? I would like to see the ping and upload as well, just for curiosity's sake.

Link to comment
Share on other sites

 

You have a speed test? I would like to see the ping and upload as well, just for curiosity's sake.

 

No sorry. Wish I would've kept it because I regularly delete apps on my phone. My ping was in the low 60's and upload reached about 1.4. I would've kept it had I known that this topic was here.

Link to comment
Share on other sites

No sorry. Wish I would've kept it because I regularly delete apps on my phone. My ping was in the low 60's and upload reached about 1.4. I would've kept it had I known that this topic was here.

Wow, that's impressive. I still haven't gotten an upload above 1mbps when the download was above 2mbps. Was this pre-NV or post?

Link to comment
Share on other sites

 

Wow, that's impressive. I still haven't gotten an upload above 1mbps when the download was above 2mbps. Was this pre-NV or post?

 

I believe it is post NV because I have received lower pings and higher speeds recently. However I am not 100% sure because I haven't gone to the tower itself yet.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I loaded a Verizon prl today and did speed tests all day. Verizon definite has more coverage but Sprint is right up there.

 

yze2ubeh.jpg

The screen shot is Verizon at my local movie theater. Sprint pulled 2.07 mbps down and 783kbps up. Surprsingly, sprint had 95 ms ping while Verizon had 200+. Overall, I'd pick sprint over the Verizon speed because anything over 2mbps is more than enough for me. :-)

Link to comment
Share on other sites

I loaded a Verizon prl today and did speed tests all day. Verizon definite has more coverage but Sprint is right up there.

 

yze2ubeh.jpg

The screen shot is Verizon at my local movie theater. Sprint pulled 2.07 mbps down and 783kbps up. Surprsingly, sprint had 95 ms ping while Verizon had 200+. Overall, I'd pick sprint over the Verizon speed because anything over 2mbps is more than enough for me. :-)

 

While roaming on Verizon EvDo, I have never had a ping less than 200, even though the speed has been right up there where yours is. I think it may be because you aren't going through Verizon directly, so the ping takes longer. Just a guess, but if anyone wants to chime in if they know the reason, I'd be interested. ;)

Link to comment
Share on other sites

While roaming on Verizon EvDo, I have never had a ping less than 200, even though the speed has been right up there where yours is. I think it may be because you aren't going through Verizon directly, so the ping takes longer. Just a guess, but if anyone wants to chime in if they know the reason, I'd be interested. ;)

 

I have had some relatively slow pings on Verizon.

 

Screenshot_2012-06-04-16-09-02.png

Link to comment
Share on other sites

 

While roaming on Verizon EvDo, I have never had a ping less than 200, even though the speed has been right up there where yours is. I think it may be because you aren't going through Verizon directly, so the ping takes longer. Just a guess, but if anyone wants to chime in if they know the reason, I'd be interested. ;)

I think it's because Verizon has way more subscribers than sprint in my area. They have more backhaul though.
Link to comment
Share on other sites

https://docs.google.com/open?id=0BzadxUTCkNANUWFFV2U1LXhiSk0 <--- FL Turnpike MM 223 (Wasn't driving lol)

 

Highest I have had on this particular phone. Pages loaded instaneously

  • Like 1
Link to comment
Share on other sites

I hit 2.52Mbps on a completed NV site in Waco. Otherwise the fastest I have hit in NM is 2.2Mbps. None of the sites in my immediate area exceed 1.4Mbps because they are all on T1's.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

I hit 2.52Mbps on a completed NV site in Waco. Otherwise the fastest I have hit in NM is 2.2Mbps. None of the sites in my immediate area exceed 1.4Mbps because they are all on T1's.

 

Robert via CM9 Kindle Fire using Forum Runner

 

I would assume that would mean the tower by my house isn't T1 then, since I got over 1.4 Mbps, huh?

Link to comment
Share on other sites

I hit 2.52Mbps on a completed NV site in Waco. Otherwise the fastest I have hit in NM is 2.2Mbps. None of the sites in my immediate area exceed 1.4Mbps because they are all on T1's.

 

Robert via CM9 Kindle Fire using Forum Runner

So, does that mean if I've seen 2.1-2.2 Mbps, backhaul has already been upgraded to NV-quality? Our local towers got some bandaid fixes a while back, and I knew that was part of it (because we were hitting 0.5 off peak times before)
Link to comment
Share on other sites

So' date=' does that mean if I've seen 2.1-2.2 Mbps, backhaul has already been upgraded to NV-quality? Our local towers got some bandaid fixes a while back, and I knew that was part of it (because we were hitting 0.5 off peak times before)[/quote']

 

If you are in an NV market, then probably yes. If you are not, then no. Sprint is doing maintenance upgrades in non NV markets adding backhaul. In places where they cannot get additional T1 lines timely, they are switching to AAV backhaul. When this occurs, you may get speeds over 2Mbps even in advance of Network Vision deployment.

 

This has occurred it about 10 sites around the ABQ area in the past six months or so. Its nice where you can get it.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

If you are in an NV market, then probably yes. If you are not, then no.

West Michigan, so second round market. So no.

 

Sprint is doing maintenance upgrades in non NV markets adding backhaul. In places where they cannot get additional T1 lines timely, they are switching to AAV backhaul. When this occurs, you may get speeds over 2Mbps even in advance of Network Vision deployment.

 

This has occurred it about 10 sites around the ABQ area in the past six months or so. Its nice where you can get it.

 

Robert via CM9 Kindle Fire using Forum Runner

What's AAV backhaul? I've actually noticed improved speeds all over West Michigan (Grand Rapids/Kentwood specifically) for 3G, getting 2+ Mbps in areas that were previously overloaded.
Link to comment
Share on other sites

  • 4 months later...
Guest
This topic is now closed to further replies.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...