Jump to content

What is LTE Record?


Recommended Posts

I was playing around with my EVO 4G LTE and I found the following in ##DATA# >EPST >View Mode >LTE Record. There I find the following options:

 

LTE available fIle

 

LTE clear file

 

LTE scan Timer

 

BSR Max Timer

 

When I access the LTE Record it looks like a log example:

0. SID:xxxx NID:x BSID:xxxx

 

The file has 15 separate entries. I have noticed the SID and the NID are the same in all 15 entries but the BSID # are all different. Are these settings to access LTE and if modified will it provide access to LTE?

Link to comment
Share on other sites

I was playing around with my EVO 4G LTE and I found the following in ##DATA# >EPST >View Mode >LTE Record. There I find the following options:

 

LTE available fIle

 

LTE clear file

 

LTE scan Timer

 

BSR Max Timer

 

When I access the LTE Record it looks like a log example:

0. SID:xxxx NID:x BSID:xxxx

 

The file has 15 separate entries. I have noticed the SID and the NID are the same in all 15 entries but the BSID # are all different. Are these settings to access LTE and if modified will it provide access to LTE?

 

AJ and I were going over that last night. The LTE Record appears to tell every LTE site your device has connected to. Apparently, even blocked sites.

 

So even though your device may not be getting a LTE signal, we may be able to verify a blocked and rejected LTE connection from this screen.

 

The one thing we have not been able to determine yet is if eHRPD connections also end up getting populated on this list.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

The one thing we have not been able to determine yet is if eHRPD connections also end up getting populated on this list.

 

I have had eHRPD connections everywhere I have traveled in NID 41, NID 42, and NID 43 (and that would include hundreds of different sites/sectors). But I have LTE record entries only for NID 41, which includes the southern suburbs of KC and is where LTE deployment in the market is most prevalent. So, I have to to conclude that the list entries are more than just eHRPD.

 

AJ

  • Like 1
Link to comment
Share on other sites

I have had eHRPD connections everywhere I have traveled in NID 41, NID 42, and NID 43 (and that would include hundreds of different sites/sectors). But I have LTE record entries only for NID 41, which includes the southern suburbs of KC and is where LTE deployment in the market is most prevalent. So, I have to to conclude that the list entries are more than just eHRPD.

 

AJ

 

How do you determine what NID is what area?

Link to comment
Share on other sites

How do you determine what NID is what area?

 

Being a consummate debug/engineering screen watcher, I have manually tracked NIDs for better than a decade, have even noted as Sprint has shifted NID boundaries. But, basically, NIDs correspond to switches (i.e. MSCs). For example, SID 4139 NID 41 (which you could say is the home SID/NID pair for Sprint, as it includes the world HQ in Overland Park) is backhauled to Lenexa MSC_1.

 

Robert has graciously mapped these site by site MSC associations in the Interactive S4GRU Maps sub forum. The site entries do not indicate NIDs, but they do indicate MSCs. So, if you note a change in MSCs between adjacent sites, then you can expect a concomitant change in NIDs between those adjacent sites. In other words, the NID boundary exists between those sites.

 

AJ

  • Like 1
Link to comment
Share on other sites

I wondered to myself whether AJ uses the word concomitant in real life speaking. Myself answered and said; "Yes. Yes he does."

  • Like 2
Link to comment
Share on other sites

The different NIDs between Baton Rouge and New Orleans doesn't mean a switch change unless I am looking at things wrong on the data.

 

I presume that the NID boundary between Baton Rouge and New Orleans coincides with the old affiliate/corporate network boundary. In that case, all bets are off. In my neck of the woods, the Alamosa PCS affiliate NID 1 was absorbed into Sprint corporate NID 43. And if Alamosa operated its own switch, then backhaul was rerouted to Independence MSC_1. In other areas, though, affiliate NIDs may remain as vestiges of a bygone era in Sprint history.

 

AJ

Link to comment
Share on other sites

I have cleared the file, and currently connected eHRPD. The file is empty and has been that way for the last 5 minutes. I will check it again when I get back to overland park where I know there it's lte and let you know what happens.

  • Like 1
Link to comment
Share on other sites

Does this menu exsist on the galaxy nexus?

 

Not so far as I have found.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

I have cleared the file, and currently connected eHRPD. The file is empty and has been that way for the last 5 minutes. I will check it again when I get back to overland park where I know there it's lte and let you know what happens.

 

File is still empty this morning. I will drive by the location where I made the LTE connection, and see what happens then.

  • Like 1
Link to comment
Share on other sites

 

I presume that the NID boundary between Baton Rouge and New Orleans coincides with the old affiliate/corporate network boundary. In that case, all bets are off. In my neck of the woods, the Alamosa PCS affiliate NID 1 was absorbed into Sprint corporate NID 43. And if Alamosa operated its own switch, then backhaul was rerouted to Independence MSC_1. In other areas, though, affiliate NIDs may remain as vestiges of a bygone era in Sprint history.

 

AJ

 

Sounds about right.

 

Sent from my C64 w/Epyx FastLoad cartridge

Link to comment
Share on other sites

Went back to the area where I picked up LTE, It only connected 3G, and there is still no entries in the file. I suspect you have to actually connect to get a record inserted in the file.

Link to comment
Share on other sites

  • 2 weeks later...

After today's OTA update, I looked in the LTE Available file, which had been empty since I cleared it, and it now has a record.

 

0. SID:4139 NID:42 BSID:785

 

Has the top always said CDMA List?

Link to comment
Share on other sites

Has the top always said CDMA List?

 

Yes. SID/NID pairs are basically a cdmaOne and CDMA2000 thing. LTE does not use SID/NID divisions.

 

AJ

Link to comment
Share on other sites

  • 2 weeks later...

Just found this menu after getting my MSL from Sprint to force my HTC E4GLE to LTE per Robert's post.

 

Most of the SID/NID pairs I have are 4622/5 which has to be Houston. Yesterday I went up to the Woodlands for the Chicago/Doobie Bros concert and I see I know have three entries under 4120/94.

 

I did manage to get an LTE connection at the Pavilion and got my fastest LTE speeds yet: 5.7Mbps down and 7.8Mbps up per the Speedtest.net app.

Link to comment
Share on other sites

  • 2 months later...

So can anyone confirm if changing any values on LTE scan timer or even bsr max timer helps at all... The reason why I'm asking is is seen a post on xda saying people found stronger signal changing the scan timer value to 60.

 

Link to comment
Share on other sites

So can anyone confirm if changing any values on LTE scan timer or even bsr max timer helps at all... The reason why I'm asking is is seen a post on xda saying people found stronger signal changing the scan timer value to 60.

 

I found no difference whatsoever. And stronger signal? That is preposterous. How on earth do they figure the scan timer settings could result in a stronger signal?

 

Robert

  • Like 1
Link to comment
Share on other sites

I found no difference whatsoever. And stronger signal? That is preposterous. How on earth do they figure the scan timer settings could result in a stronger signal?

 

Robert

 

The same way they figure a PRL update gives them better 3G PCS speeds and coverage since they believe it's a list of towers ;)

  • Like 4
Link to comment
Share on other sites

The same way they figure a PRL update gives them better 3G PCS speeds and coverage since they believe it's a list of towers ;)

 

You want a list of towers? I got your list of towers right here.

 

http://en.wikipedia.org/wiki/List_of_tallest_towers_in_the_world

 

AJ

  • Like 4
Link to comment
Share on other sites

  • 4 weeks later...
  • 2 months later...

So can anyone confirm if changing any values on LTE scan timer or even bsr max timer helps at all... The reason why I'm asking is is seen a post on xda saying people found stronger signal changing the scan timer value to 60.

 

I went through the whole "lte connection drama" and as of right now I've been running lte for at least 30mins without any disruptions. My profile is set at 1, scan time at 2, and max timer at 30. It's been the longest I've had lte working without disconnecting...

post-9557-0-83879700-1357744601_thumb.png

Link to comment
Share on other sites

  • 2 months later...

I know I am a little late to this thread (Possibly reviving it?!?!), but I am assuming that the BSR menu will change a few settings inasmuchas LTE scan/connect times?

 

I have changed my timer menu settings under BSR to

 

nextLTEScan Timer 1

BSR timer 1

BSR Max Timer 30

 

 

Theoretically, this should hold an available LTE signal longer and connect quicker, correct? Or am I sadly mistaken? I will let everyone know if it yields any fruitful results as I have not run across many in depth teardowns of ##DIAG# settings (or at least BSR in particular)

 

 

Trying this on the faithful (and replaced/refurbished/who knows, finally) Note 2.

Link to comment
Share on other sites

I know I am a little late to this thread (Possibly reviving it?!?!), but I am assuming that the BSR menu will change a few settings inasmuchas LTE scan/connect times?

 

I have changed my timer menu settings under BSR to

 

nextLTEScan Timer 1

BSR timer 1

BSR Max Timer 30

 

 

Theoretically, this should hold an available LTE signal longer and connect quicker, correct? Or am I sadly mistaken? I will let everyone know if it yields any fruitful results as I have not run across many in depth teardowns of ##DIAG# settings (or at least BSR in particular)

 

 

Trying this on the faithful (and replaced/refurbished/who knows, finally) Note 2.

 

It's usefulness seems to vary by device. It seemed to work in the LGOG, but caused battery life to plummet outside of an LTE area. On my Samsungs and EVO, it did not seem to help catch an LTE signal any faster, nor had any effect on battery life as it should.

 

Robert via Nexus 7 with Tapatalk HD

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...