Jump to content

Network Vision/LTE - Missouri Market (includes St. Louis)


riddlebox

Recommended Posts

Nothing new to see at the Dellwood rec center site but the service is the best I have ever gotten there by at least double the data of the next highest test and 10-20x normal. 1.23 mbps down/.52 up.

The ping was 172 ms. What's the normal ping for a site with NV level backhaul? Does the ping further improve with new cabinets and gear?

 

There really is no normal ping for EVDO. EVDO ping is dependent on two things, the airlink saturation and backhaul. Here is a little understanding of EVDO pings...

 

EVDO ping time is based on two things, airlink speed and backhaul speed. So the total ping is airlink ping in milliseconds plus backhaul ping in milliseconds. These two together is what you are essentially seeing in your speed tests.

 

If you have EVDO connected to backhaul that is running around 2-10ms, and the EVDO airlink is under 50%, then the total throughout ping could be as low as 50-60ms. Because the airlink portion is going to be 50ms alone, 25 each way in ideal circumstances, and you add the backhaul ping and the airlink ping together and get a total ping.

 

However, an EVDO carrier that is between 50% to 100% capacity, the airlink portion alone will be 75-200ms. And then you add the backhaul ping. Which could be 2ms to 100ms itself in normal circumstances.

 

So, all of these above would be normal EVDO operation pings. So EVDO can operate normally between approximately 50ms - 300ms ping times.

 

However, once over capacity, all bets are off. If the EVDO carrier is over capacity, and the air link gets saturated, then your data has to wait its turn to go through the airlink, so to speak. And this can push pings way up. Even over 1000ms (one second). Also, if the backhaul gets saturated, the same thing happens on that end...your data has to wait its turn before going through the pipe. Causing delay, and longer pings.

 

Hopefully all this makes sense.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 2
Link to comment
Share on other sites

Robert I think you just provided one of the best explanations of all the factors involved in the ping times for the end user. I think that would be helpful to a lot of the people that are not as big into the tech as most of us here. :tu:

  • Like 1
Link to comment
Share on other sites

Another snow storm is getting ready to hit....I'd imagine any progress in the affected areas will be slowed for a bit.

 

Hopefully with the warmer temps Wednesday-Saturday will melt all of it away and they can get back to work!

Link to comment
Share on other sites

So I snagged this speed test coming home from the store tonight, about half a mile West of Flying J.

 

2013-03-25_20-03-15_zps20221abb.png?t=1364261267

 

But when I got home, which is about another half mile away, it still hows the 4G icon, but am getting just over 3G speeds, about 2.8 down and 1.3 up inside the house.

 

Hope the crank up the power, boost the signal, something.

Link to comment
Share on other sites

So I snagged this speed test coming home from the store tonight, about half a mile West of Flying J.

 

2013-03-25_20-03-15_zps20221abb.png?t=1364261267

 

But when I got home, which is about another half mile away, it still hows the 4G icon, but am getting just over 3G speeds, about 2.8 down and 1.3 up inside the house.

 

Hope the crank up the power, boost the signal, something.

 

I personally don't care about LTE inside my house. Just outside my front door, the places I go, and everywhere in between.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 1
Link to comment
Share on other sites

 

I personally don't care about LTE inside my house. Just outside my front door, the places I go, and everywhere in between.

 

Robert via Nexus 7 with Tapatalk HD

 

QFT

 

I got wifi at home. I mostly care about work and were I am about. 30-60k here, I'd kill for 2.8m out and about.

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

No, a new site. Unrelated. First truly NV site.

 

Dear NV Gods: Please let this be right outside of my office. I'm tired of being on the Extended Network whilst inside. :lol:

Link to comment
Share on other sites

 

Dear NV Gods: Please let this be right outside of my office. I'm tired of being on the Extended Network whilst inside. :lol:

 

God has granted you the ability to know where the site is located. It is shown on the NV Sites Complete map in the Sponsor section.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 1
Link to comment
Share on other sites

Now I am not so convinced the Flying J tower is online. Drove right by it and still only pulled about 2m down.

 

You Joplin folks should start a Cell ID tracking sheet like the Austin and New Orelans members did. Then you can always know where you're connected.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 1
Link to comment
Share on other sites

You Joplin folks should start a Cell ID tracking sheet like the Austin and New Orelans members did. Then you can always know where you're connected.

 

Robert via Nexus 7 with Tapatalk HD

 

May have to do just that. Would that be the BSID for the Cell towrs ID number?

Link to comment
Share on other sites

 

 

You Joplin folks should start a Cell ID tracking sheet like the Austin and New Orelans members did. Then you can always know where you're connected.

 

Robert via Nexus 7 with Tapatalk HD

 

How do they get the tower ids short of looking at stuff in the sponsors section?

Link to comment
Share on other sites

I used a SignalCheck app to check the signal strength, signal was faily weak.

 

NOTE: My phone is rooted so I had it set to LTE only hence 1x and EV-DO showing no signal, was trying to get just pure LTE.

 

 

how did you get it to be LTE only? i have been curious about trying to do that, but never really looked into it a whole lot.

Link to comment
Share on other sites

how did you get it to be LTE only? i have been curious about trying to do that, but never really looked into it a whole lot.

 

 

For a rooted EVO LTE you need to open the dialing pad, enter ##3282#

 

Tap on Edit Mode

Enter your phones MSL number

Tap on EVDO

Tap Preferred Mode

Select LTE only

  • Like 1
Link to comment
Share on other sites

For a rooted EVO LTE you need to open the dialing pad, enter ##3238#

 

Tap on Edit Mode

Enter your phones MSL number

Tap on EVDO

Tap Preferred Mode

Select LTE only

 

awesome! thanks!

 

edit: i cannot seem to get it to work. it just returns to the dialing pad after i press the last # sign. i will keep trying things, but im not sure whats going on. do i need to grant it root access in supersu itself? it never asks for root access.

 

edit: ok, got it working. its ##3282#

Link to comment
Share on other sites

I'll preface this by saying that since I'm in St. Louis and I don't travel much, my phone has never connected to LTE (It is technically a replacement and I got to play with LTE in dallas for about 15 seconds on my old one). That said, what does this stuff mean? I found it in my LTE record >LTE Available file4g%20available%20list.png

 

Is this some sort of ehrpd thing, or should actually I be excited?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
    • So how does this whole direct to satellite thing fit in with the way it works now? Carriers spend billions for licenses for specific areas. So now T-Mobile can offer service direct to customers without having a Terrestrial license first?
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...