Jump to content

HTC One M9 User Thread


COZisBack

Recommended Posts

Joking aside, I do think this a bit of a gaffe on the part of HTC -- both to call this handset "M9" and to offer it in a "gunmetal" finish.  HTC should have skipped one or the other this generation.

 

AJ

 

Well... save that for the 2022 model, I have one of those as well.  :2tu:

Link to comment
Share on other sites

Why would they set band priority to 25>26>41????

 

Would of expected it to be 41>25>26 no?

 

Would think it would be tough to be out of range of band 25/26 and pick up only 41 no?... Would require a location where there is only clear signal basically.

Link to comment
Share on other sites

Well... save that for the 2022 model, I have one of those as well.  :2tu:

 

My amazing powers of logical deduction say M16.  Am I correct?

 

AJ

Link to comment
Share on other sites

:tu:

 

If both HTC and S4GRU are still going in 2022, and there is an HTC One M16, that will be quite a trip.

 

AJ

  • Like 2
Link to comment
Share on other sites

Well I'm joining this club in a few days. Anyone have a case and/or a tempered glass screen protector they'd recommend?

  • Like 1
Link to comment
Share on other sites

Well I'm joining this club in a few days. Anyone have a case and/or a tempered glass screen protector they'd recommend?

I am using a supershieldz tempered glass protector, have had great luck with those over the years.  As far as cases go i am using a basic clear tpu case.

Link to comment
Share on other sites

I am using a supershieldz tempered glass protector, have had great luck with those over the years. As far as cases go i am using a basic clear tpu case.

Does it stopped at each edge of the actual screen like most, or does it cover the full face of the phone? The pictures on amazon are of a 6/6+ xD.
Link to comment
Share on other sites

Well I'm joining this club in a few days. Anyone have a case and/or a tempered glass screen protector they'd recommend?

 

Spigen's Thin Fit case is great for minimal coverage while showing of the sexy lines and build of this device.  Standard TPU is good for full coverage.  I have pics of the Thin Fit on my brothers Silver/Gold that I sent to him, no pics of TPU on a phone yet BUT I could probably take pics of both Thin Fit and Black TPU tomorrow. No screen pro here, never needed but if I did, I'd give Supershieldz a try based on muffinman and others recommendation OR the Zagg tempered series. 

Link to comment
Share on other sites

I just received my Spigen Neo Hybrid case in gunmetal grey just a few minutes ago and it is absolutely spectacular. It goes with the phone perfectly, looks high end and I love the textured back for grip. I went with a tempered glass screen protector from Amazon and I just picked one that had a lot of high quality reviews and that works well too. I've never used a tempered glass protector before but I will not go back to the film type after having this one.

Link to comment
Share on other sites

Does it stopped at each edge of the actual screen like most, or does it cover the full face of the phone? The pictures on amazon are of a 6/6+ xD.

It covers the glass and stops at the top and bottom speakers.  I would assume that any of them that covers the entire front of the phone is because that phone has an all glass front where as the m9 has the metal speaker grills.

Link to comment
Share on other sites

It covers the glass and stops at the top and bottom speakers. I would assume that any of them that covers the entire front of the phone is because that phone has an all glass front where as the m9 has the metal speaker grills.

That's what I assumed based off the reasons you said. Thank you for clarifying.
Link to comment
Share on other sites

Any news M9 shipping already?

Mines supposed to be here Thursday. Trying to decide if I need an SD card, and how big...
Link to comment
Share on other sites

Mines supposed to be here Thursday. Trying to decide if I need an SD card, and how big...

 

I'd say 32gig as they aren't that expensive, pictures are 3-5mb AND if you are "root" kinda guy, a stock nandroid is 8gb (system is 4.3gb alone). 

 

Any news M9 shipping already?

 

They've been shipping since the 2nd or 3rd, just gotta order online and it'll magically appear, rather quickly. :)

Link to comment
Share on other sites

I'd say 32gig as they aren't that expensive, pictures are 3-5mb AND if you are "root" kinda guy, a stock nandroid is 8gb (system is 4.3gb alone).

 

 

They've been shipping since the 2nd or 3rd, just gotta order online and it'll magically appear, rather quickly. :)

There's no if, first thing I'm doing is unlocking and rooting (s-offing off too if its out by then..) XD. Right now going off Amazon there's only a 10 dollar difference from 32-64, although now I'm trying to decide on read/write speeds >.>...
  • Like 1
Link to comment
Share on other sites

Any RF test anyone?  Depending how the RF performs on B25 and B41 is a deciding factor between the M9 or the S6 Edge for me.  Need a good performer because no B26 for us in San Diego anytime soon.

Link to comment
Share on other sites

Any RF test anyone?  Depending how the RF performs on B25 and B41 is a deciding factor between the M9 or the S6 Edge for me.  Need a good performer because no B26 for us in San Diego anytime soon.

Well I already have the m9 and as far as rf goes it's pretty close to the m8, maybe slightly better. Unfortunately I am in a band 25 only market until next week when I head back to atlanta. I have also pre-ordered the s6 edge so when that comes in I can do a comparison. For what its worth though, AJ's article made it pretty clear(at least on paper anyway) that the m9 is better than the s6 when it comes to rf performance but of course things could always change in the real world.

  • Like 3
Link to comment
Share on other sites

I've had my M9 a week, and its very smooth and nice. I love Skinomi's glass screen protector; it's a little thinner for better profile (0.33 mm, they say). I got Spigen's thin TPU case, and its very nice, too.

 

I upgraded from an M7, so I'm pleased. Gets a little warm when stressed, but that's all. There's a great thread on xda for manual camera settings that help make up for HTC's crappy post-processing. I'm hoping they tweak the software some more with updates. All in all, most of the negative reviews were way too harsh. Posts by real owners are much more favorable and realistic.

 

I haven't really treated signal strength, but it seems just fine. I've been kicked down to 1x roaming on US Cellular a lot, but that could be due to nTelos-land evolution. (At least, that's the fervent hope here!)

 

Sent from Tapatalk on my HTC One M9

  • Like 1
Link to comment
Share on other sites

Any RF test anyone? Depending how the RF performs on B25 and B41 is a deciding factor between the M9 or the S6 Edge for me. Need a good performer because no B26 for us in San Diego anytime soon.

Don't see how anyone could ever connect to band 41 the way it's set now. It would require that band to be the only one available at all as band priority is currently 25>26>41 now....
Link to comment
Share on other sites

Don't see how anyone could ever connect to band 41 the way it's set now. It would require that band to be the only one available at all as band priority is currently 25>26>41 now....

 

We don't have B26 in San Diego.  We are getting more B41 and seems like my S5 does not latch on B41 too well.

Link to comment
Share on other sites

Don't see how anyone could ever connect to band 41 the way it's set now. It would require that band to be the only one available at all as band priority is currently 25>26>41 now....

The network determines who connects to what. Devices only set the initial scan priority for attachment to the network.

 

Sent from my Nexus 5

  • Like 1
Link to comment
Share on other sites

The folks who use them, the glass screen protectors are all wet installs right? I just ordered the Skinomi, let's see how it plays out. I always avoided wet installs, ever since I got the Zagg for my iPhone 5 and it started peeling after 1.5 years.

Link to comment
Share on other sites

My m9 came in this morning, after unlocking rooting and finally getting stuff set up (a lot easier thanks to the HTC transfer tool) I finally got to compare rf performance with my n5. The m9 holds LTE (around a -104 db strength on average for b25) in my 4th story room where my n5 would barely check for LTE then find b26 and drop it. I'm in KC so this is a matured market, when I get out to see some b41 I'll edit or update.

 

Edit: M9 smokes the n5 in b41, easily 8-10 db better. I was on b41 in places I was lucky to get b25.

  • Like 5
Link to comment
Share on other sites

The folks who use them, the glass screen protectors are all wet installs right? I just ordered the Skinomi, let's see how it plays out. I always avoided wet installs, ever since I got the Zagg for my iPhone 5 and it started peeling after 1.5 years.

Not really, the best way to do it is to shower with the bathroom door closed and after you're done apply it while you're in there. The steam gets all the particles out of the air, then you just apply it like a normal screen protector. Wipe off the screen so its clean, pick an edge and try to line it up as best as you can using whatever technique you prefer to keep it from bubbling.
  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...