Jump to content

Airave Owners


Recommended Posts

I have the 2.5 and the 2.0 (gave the 2.0 to my sis when i upgraded).  Set it as the DMZ host in your router, and works beautiful.  Percect call quality, always 100% signal.  Made having Sprint during the transition bearable

Link to comment
Share on other sites

Just called and requested my replacement Airave since my old Samsung no longer works as of today.  They said they are sending me a 2.5 plus.  I wish I had called last week because my local cell site went down on Saturday after someone tried to steal copper from it.  Could be weeks or months before it's fixed as it's located on our local power company transmission tower and land and only they can repair it.  So very poor signal until the new Airave arrives.

Link to comment
Share on other sites

I was also wondering the difference in between the 2.5 and the 2.5 plus. sprint is sending us one because of bad voice service. guess it will be fun to test and check things out on it

Link to comment
Share on other sites

I was also wondering the difference in between the 2.5 and the 2.5 plus. sprint is sending us one because of bad voice service. guess it will be fun to test and check things out on it

I'm gonna guess the 2.5+ has a 1xA carrier in addition to PCS. I say this because I was out today in a strip mall and connected to an airave that I was on the fringe of. I noticed that it wasn't just 1X that I connected to but 1x800. Wish I grabbed a screen shot. I was maybe 300-400 feet away and had great speeds at low signal.

  • Like 1
Link to comment
Share on other sites

I'm gonna guess the 2.5+ has a 1xA carrier in addition to PCS. I say this because I was out today in a strip mall and connected to an airave that I was on the fringe of. I noticed that it wasn't just 1X that I connected to but 1x800. Wish I grabbed a screen shot. I was maybe 300-400 feet away and had great speeds at low signal.

That's awesome. I was hoping it would come in today. It made it to the closest ups place near me and was just hoping. So I'll just have to wait till Monday.. I have the iphone 5 and galaxy s3 so I'll have to do some messing around with it.

Link to comment
Share on other sites

That's strange.  All four lights are green now but phone will not connect to it.  My old Samsung Airave would connect immediately.

Were you able to get it to connect or is it still happening? This will be the first time for me getting an airave and I hope it won't be defective, and have to send it back

Link to comment
Share on other sites

Were you able to get it to connect or is it still happening? This will be the first time for me getting an airave and I hope it won't be defective, and have to send it back

I had this problem for a couple weeks on my 2.5. It was only limited to my phone. My wife and daughter could connect with no issues. It eventually just worked itself out. Try leaving the phone next to the airave for 10-20 minutes so that it sees the airave as a strong signal. Unless there's a problem with your unit maybe?

Link to comment
Share on other sites

Were you able to get it to connect or is it still happening?

 

Still happening.

 

I had this problem for a couple weeks on my 2.5. It was only limited to my phone. My wife and daughter could connect with no issues. It eventually just worked itself out. Try leaving the phone next to the airave for 10-20 minutes so that it sees the airave as a strong signal. Unless there's a problem with your unit maybe?

 

I waited about 6 hours and my phone still wouldn't connect to it.  Had the phone in the same room right next to it for at least 2 hours.  I don't think it's a problem with the unit because an older Samsung flip we have connects to it fine.  It appears to be an incompatibility issue with the LG Optimus G and the 2.5 Plus Airave.  I'm going to have a friend bring over another LG OG and see if it can connect.

Link to comment
Share on other sites

Still happening.

 

 

I waited about 6 hours and my phone still wouldn't connect to it.  Had the phone in the same room right next to it for at least 2 hours.  I don't think it's a problem with the unit because an older Samsung flip we have connects to it fine.  It appears to be an incompatibility issue with the LG Optimus G and the 2.5 Plus Airave.  I'm going to have a friend bring over another LG OG and see if it can connect.

I would call airave support. I had a problem a month ago where my phone wouldn't connect, separate from the previous mention. Turns out my airave was transmitting on channel 1175 which is not in the PRL for my region to be scanned. This meant my phone would never find it. I edited my PRL and added that channel in. I wonder if you can get to an engineering screen on that older phone?

 

Unless you happen to be savvy in PRL editing and DFS or similar CDMA tools?

Link to comment
Share on other sites

Unless you happen to be savvy in PRL editing and DFS or similar CDMA tools?

I don't know anything about PRL editing.  Sprint should make sure that the Airave works correctly with every phone, PRL etc.  You shouldn't have to mess around with the PRL to get it to work.  But I will call tech support and see what they can do tomorrow and mention what you said about the channel thing.

Link to comment
Share on other sites

Ok so I called tech support and they fixed it.   There was nothing wrong with the Airave channel (225) and the channel my phone was on from the regular network (25).  They had me reprogram the phone with the handsfree activation thing and then update profile, PRL.  All things I had already tried yesterday but for some reason today it worked.  He claimed that sometimes certain smartphones will get stuck on a channel and have to be reset like this to pick up the Airave.

 

So far good results.  Calls sound good, texts send out fine and the data speeds are the same as what I normally get from my DSL connection.  I did have to hook up the GPS antenna and run it to the window as the red light would intermittently come on and blink.  But now it's fine with the antenna.

Link to comment
Share on other sites

So just got the airave today. It took awhile, sprint sent it to the wrong address and it took some calls to figure out what all happened. They were able to send the driver back out to our area to the right address! Least I knew him and he was cool with it. The setup up took awhile and it didn't activate the mobile network. So I called and the lady was very helpful and got it up and working for me! Haven't got to try it out much but the full bars are great to see again!!

Link to comment
Share on other sites

What is the difference between the Airave 2.5 and 2.5+

 

Sent from my SPH-L900 using Tapatalk 4

 

 

I'm gonna guess the 2.5+ has a 1xA carrier in addition to PCS. I say this because I was out today in a strip mall and connected to an airave that I was on the fringe of. I noticed that it wasn't just 1X that I connected to but 1x800. Wish I grabbed a screen shot. I was maybe 300-400 feet away and had great speeds at low signal.

 

 

airave 2.5 plus is suppose to handoff to the regular cell network

Link to comment
Share on other sites

I understood that the original 2.5 will handoff to the cell network when leaving airave coverage, but wouldn't transfer a existing call when entering airave coverage.  So does the 2.5+ handoff both ways?

Link to comment
Share on other sites

I understood that the original 2.5 will handoff to the cell network when leaving airave coverage, but wouldn't transfer a existing call when entering airave coverage.  So does the 2.5+ handoff both ways?

I have tried this, and i haven't got it to work. I've had no issue with the handoff between the airave and cell coverage. It took me awhile to get away from airave coverage. When i was out of its coverage I made a call and then walked back to the coverage of the airave I still had the same amount of bars i did with cell network. Then I made it upstairs to where the airave is setting, and then my bars dropped, and then the call failed. So I'm not for sure if it works or not but i wasn't able to get the phone to transfer from cell coverage to airave coverage. Maybe someone else would be able to test it, and let us know!

Link to comment
Share on other sites

So does the 2.5+ handoff both ways?

 

Incoming handoff to the Airave is not possible.  In its neighbor list, a local cell site cannot know the PN offset of every Airave in the area.

 

AJ

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...