Jump to content

Network Vision/LTE - New Orleans Market


Slimboutit

Recommended Posts

I mapped out the south end of the Causeway yesterday.

 

Anyone who maps out or finds any sites please do a few things if you can. Iphone users can shine here as they can give us both pieces of data. Once you find the site, please drive close to it as possible. Take screenshots of the LTE Engineering screen. I am looking for the serving cell number to change (Samsung users). We need these numbers to identify the site. And trust me, it is much easier to do this when there are minimal sites online. HTC users have another number on their screen in hex, forgot the name of it. Iphone users have both. Please post the screenshots along with a screenshot of your location in Google maps or Sensorly or whatever map program you like.

 

I will do a formal write up of instructions and screenshots for everyone to follow to crowd source the data.

 

It's finally here! Wireless geeks unite!

 

-- "Sensorly or it didn't happen!"

 

 

  • Like 1
Link to comment
Share on other sites

I see someone mapped a little bit of the I-55 Lake Maurepas site, it must have not been turned on or something and picking up from another site, the signal is too weak looking.

 

Seeing how the site is a few miles north of where the trail ends, it could be the Maurepas site. And it fades to the south as it gets farther away from the site. I believe it is a Maurepas snail trail. Woooo weee!

 

Robert via Nexus 7 on Tapatalk

Link to comment
Share on other sites

There was no 3G available Uptown this morning at all, so I'm hoping that's progress. Maybe hot-swapping the tower I usually connect to?

 

How do I cycle my phone into LTE when that happens in order to check? Just go to Airplane Mode, then out of it?

 

I tried that ##DEBUG# too, I don't know what goes in the Data field to get to the next screen.

Link to comment
Share on other sites

There was no 3G available Uptown this morning at all, so I'm hoping that's progress. Maybe hot-swapping the tower I usually connect to?

 

How do I cycle my phone into LTE when that happens in order to check? Just go to Airplane Mode, then out of it?

 

I tried that ##DEBUG# too, I don't know what goes in the Data field to get to the next screen.

 

Yes, just cycle airplane mode and you should pick it up if in range.

 

Not sure what you mean about data field in ##DEBUG#. My phone just goes to the information screen after I type it in.

Link to comment
Share on other sites

There was no 3G available Uptown this morning at all, so I'm hoping that's progress. Maybe hot-swapping the tower I usually connect to?

 

How do I cycle my phone into LTE when that happens in order to check? Just go to Airplane Mode, then out of it?

 

I tried that ##DEBUG# too, I don't know what goes in the Data field to get to the next screen.

 

Galaxy Nexus users have to dial *#*#DEBUG#*#* and type in 777468 to access the engineering screens.

Link to comment
Share on other sites

Think you found a new LTE site in your area? Please help us by getting some information from the site.

If you find a new LTE site in the market or what you may think is a new site, drive close to what you think is the new active site. Remember, the signal bar indicator on devices pre-Android 4.3 is not the LTE signal strength. You will need to look at your LTE signal strength in the LTE engineering screens. If you do not know how to do this, see the instructions at the end of this post.  An easier method to see the signal strength is to download SignalCheck

While accessing the LTE engineering screen on your device make a note of the Serving Cell value. This value will change as you move into the different sectors of the site. Drive to different locations around the site if you can. Make a note of the Serving Cell values in each location. Take screenshots if it is easier for future reference of each sector. You will be able to determine if this is indeed the site you are connected to by referencing this Serving Cell value as you move around the site. We are collecting all the sites serving cell values so we can easily determine the coverage and or if a site is active or not. It is our own crowd sourcing of LTE data.

PCI Serving Cells(3 digit style) on a standard 3 sector site are 169 apart from each other in our Ericsson market. For instance 91, 260, and 429 all belong to the same site. The general rule is they will be numbered in clockwise fashion on the site. 91 would be your northern sector, 260 your southeast and 429 is southwest. Each site is unique in the direction the sectors face so there will be some variances of this. On the GCI HEX style serving cells the last two digits indicate the sector number 01, 02, and 03. The same clockwise numbering applies.

Please post the screen shots of the LTE engineering screens and also post a screenshot of your location in Google Maps, Sensorly, etc. And as always please map out any 4G coverage you can find with Sensorly! Go to the Map Trip tab and hit Start to guarantee mapping.

LTE Engineering Screen info:

EVO LTE, LG Viper, LG Optimus G, HTC One, Motorola Photon Q LTE

Open the dialer then and dial ##DEBUG#
Select LTE Engineering
Serving Cell is the site and RSRP shown in dBm is your LTE signal strength.

EVO_LTE_ENG.png

Galaxy S3, S4, Victory LTE & Note II

Open the dialer then and dial ##DEBUG#
Enter 777468 (Sprint) for the lock code
Select LTE Engineering
Serving Cell is the site and RSRP shown in dBm is your LTE signal strength.

SAMSUNG_LTE_ENG.png

Galaxy Nexus

Open the dialer and dial *#*#DEBUG#*#*
Enter 777468 (Sprint) for the lock code
Select LTE Engineering
Serving Cell is the site and RSRP shown in dBm is your LTE signal strength.

NEXUS_LTE_ENG.png

iPhone5 (can not confirm exact steps)

Open the dialer and dial *3001#12345#*
Select LTE and/or Serving Cell Info
Physical Cell ID and Cell Identity are both values pertaining to the site ID. Post both.

IPHONE_LTE_ENG.png

 

LG Nexus 5 or LG G2 - SignalCheck screen:

 

NEXUS5_LTE.png

 

LTE Signal Strength Scale:

-96dBm or better = great
-97dBm through -107dBm = good
-108dBm through -114dBm = fair
-115dBm or worse = poor

  • Like 15
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • I've now seen how things work in Kobe, Hiroshima, and Osaka, as well as some areas south of Osaka (e.g. Wakayama, Kinokawa), and tried three more SIMs. The two physical SIMs (different branding for each) both use IIJ, which provides a Japanese IP address/routing on NTT, aleit LTE-only, so latency is ~45ms to Tokyo. The catch with NTT is that it uses two frequency bands (B42/3500 MHz LTE, n79/4900 MHz NR) that you're not going to get on an Android sold in the US, and I'm guessing that B42 would be helpful speed-wise on that network, as it doesn't have B41. I also found one place that doesn't have cell service: a vending machine in the back of the Osaka Castle tower. Or, rather, the B8/18/19 signal is weak enough there to be unusable. Going back to 5G for a moment, I saw a fair amount of Softbank n257 in Hiroshima, as well as in some train stations between Osaka and Kobe. 4x100 MHz bandwidth, anchored by B1/3/8, with speeds sometimes exceeding 400 Mbps on the US Mobile roaming eSIM. Not quite the speeds I've seen on mmW in the States, but I've probably been on mmW for more time over the past few days than I have in the US over the past year, so I'll take it. My fastest speed test was actually on SoftBank n77 though, with 100 MHz of that plus 10x10 B8 hitting ~700 Mbps down and ~80 Mbps up with ~100ms latency...on the roaming eSIM...on the 4th floor of the hotel near Shin-Kobe station. Guessing B8 was a DAS or small cell based on signal levels, and the n77 might have been (or was just a less-used sector of the site serving the train station). I'm now 99% sure that all three providers are running DSS on band 28, and I've seen 10x10 on similar frequencies from both NTT and SoftBank IIRC, on both LTE and 5G. I also picked up one more eSIM: my1010, which is different from 1010/csl used by US Mobile's eSIM unfortunately, as it's LTE-only. On the bright side, it's cheap (10GB/7 days is like $11, and 20GB for the same period would be around $15), and can use both KDDI and SoftBank LTE. It also egresses from Taiwan (Chunghwa Telecom), though latency isn't really any better than the Singapore based eSIMs. Tomorrow will include the most rural part of our journey, so we'll see how networks hold up there, and from tomorrow night on we'll be in Tokyo, so any further reports after that will be Tokyo-centric.
    • I think the push for them is adding US Mobile as a MVNO with a priority data plan.  Ultimately, making people more aware of priority would allow them (and other carriers) to differentiate themselves from MVNOs like Consumer Cellular that advertise the same coverage. n77 has dramatically reduced the need for priority service at Verizon where the mere functioning of your phone was in jeopardy a couple of years ago if you had a low priority plan like Red Pocket. Only have heard of problems with T-Mobile in parts of Los Angeles. AT&T fell in between. All had issues at large concerts and festivals, or sporting events if your carrier has no on-site rights. Edit: Dishes native 5g network has different issues: not enough sites, limited bandwidth. Higher priority would help a few. Truth is they can push phones to AT&T or T-Mobile.
    • Tracfone AT&T sims went from QCI 8 to 9 as well a couple years ago. I'm pretty neutral towards AT&T's turbo feature here, the only bad taste left was for those who had unadvertised QCI 7 a couple months ago moved down to 8. In my eyes it would have been a lot better for AT&T to include turbo in those Premium/Elite plans for free to keep them at QCI 7, while also introducing this turbo add on option for any other plans or devices. As it stands now only a handful of plans can add it, and only if you're using a device on a random list of devices AT&T considers to be 5G smartphones.
    • My Red Pocket AT&T GSMA account was dropped to QCI 9 about a year ago.  Most recently 8 for the last few years prior.  Voice remains at 5.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...