Jump to content

iPhone Field Test


MacinJosh

Recommended Posts

For those of you who have an iPhone, you can access Field Test mode by dialing *3001#12345#* and then hit call in your phone dialer.

 

Sent from Joshs Evo Shift using Forum Runner

  • Like 1
Link to comment
Share on other sites

Which number is the ID of the cell tower I'm connected to? None of the numbers seem to match any of the numbers of the towers I'm near according to the maps in the sponsor forum. Is that number not on those maps?

Link to comment
Share on other sites

Unfortunately, I don't know how to find out which tower you are connected to. One thing that may come close is Base ID, but even then I'm still not sure. I will look into it more and let you know.

  • Like 1
Link to comment
Share on other sites

I will look into it more and let you know.[/Quote]Thank you, I'm curious as well.

 

My gsm went -122 for about half a minute. No service is -105, does that mean I had negative service? ;)

 

Sent via Forum Runner on my jailbroken iOS 5.1 iPhone 4 

Edited by gopher_otis
Link to comment
Share on other sites

Thank you, I'm curious as well.

 

My gsm went -122 for about half a minute. No service is -105, does that mean I had negative service? ;)

 

Sent via Forum Runner on my jailbroken iOS 5.1 iPhone 4 

 

That would still be no service, it's just that your phone was no where near a tower. Are you on at&t or T-Mobile, as you mentioned GSM.

Link to comment
Share on other sites

 

That would still be no service' date=' it's just that your phone was no where near a tower. Are you on at&t or T-Mobile, as you mentioned GSM.[/quote']

 

Sprint, I just thought that's what the signal indicator was called. It was weird though because now its back to -83 and I haven't moved at all.

 

Sent via Forum Runner on my jailbroken iOS 5.1 iPhone 4 

Link to comment
Share on other sites

Sprint, I just thought that's what the signal indicator was called. It was weird though because now its back to -83 and I haven't moved at all.

 

Sent via Forum Runner on my jailbroken iOS 5.1 iPhone 4 

 

Oh, that is still your CDMA service signal. And I have that problem indoors every once in a while on my Evo Shift. Signal just disappears and then comes back. It's probably happening when it changes towers to compensate and provide better service, which is more draining on the battery when I am equally distant from 2 towers.

Link to comment
Share on other sites

It's probably happening when it changes towers to compensate and provide better service' date=' which is more draining on the battery when I am equally distant from 2 towers.[/quote']

 

Yeah me too. It's the Sprint crap zone. I get -93 in my apartment and then I step across the street into -70.

 

Sent via Forum Runner on my jailbroken iOS 5.1 iPhone 4 

Edited by gopher_otis
Link to comment
Share on other sites

Which number is the ID of the cell tower I'm connected to? None of the numbers seem to match any of the numbers of the towers I'm near according to the maps in the sponsor forum. Is that number not on those maps?

 

I did discover that Base ID is the actual tower that you are connected to, however, I can't match them up with the tower names in the Sponsor section.

Link to comment
Share on other sites

 

I did discover that Base ID is the actual tower that you are connected to, however, I can't match them up with the tower names in the Sponsor section.

 

I believe the BaseID is the sector you are tied to.

Link to comment
Share on other sites

 

I believe the BaseID is the sector you are tied to.

 

I think that's accurate. I live next to a Sprint site in New Mexico. As I change sectors around the tower, the Base ID changes.

 

The Base IDs are in no way connected to Sprint Site ID's. The only way you can connect the two is geographically through GPS coords.

 

Robert - Posted from my E4GT with ICS using Forum Runner

Link to comment
Share on other sites

Which number is the ID of the cell tower I'm connected to? None of the numbers seem to match any of the numbers of the towers I'm near according to the maps in the sponsor forum. Is that number not on those maps?

 

Serving PN Offset.

 

EDIT: I realized after that my reply is useless as it doesn't show any correlation between the phone and the S4GRU maps. The PN is how your location is determined internally. I'm sure someone here has the know how to assign a PN with the location names ;)

Link to comment
Share on other sites

 

I think that's accurate. I live next to a Sprint site in New Mexico. As I change sectors around the tower' date=' the Base ID changes.

 

The Base IDs are in no way connected to Sprint Site ID's. The only way you can connect the two is geographically through GPS coords.

 

Robert - Posted from my E4GT with ICS using Forum Runner[/quote']

 

Even then it's still impossible for me to accurately locate my local towers even on my shift because CDMA field test puts it like a mile from where it actually is.

 

Sent from Joshs iPhone 3Gs using Forum Runner

Link to comment
Share on other sites

 

Even then it's still impossible for me to accurately locate my local towers even on my shift because CDMA field test puts it like a mile from where it actually is.

 

Sent from Joshs iPhone 3Gs using Forum Runner

 

Have you tried NetMonitor?

 

Robert - Posted from my E4GT with ICS using Forum Runner

Link to comment
Share on other sites

 

Have you tried NetMonitor?

 

Robert - Posted from my E4GT with ICS using Forum Runner

 

Yes I have, and but it seems to be more inaccurate for Visalia towers than cdma field test is.

 

Sent from Joshs Evo Shift using Forum Runner

Link to comment
Share on other sites

  • 3 months later...

If I wanted to see all the avaliable evdo channels how could I do that on my iPhone? When I use this code it just tells me what channel I am on.

 

How to view available carrier channels on your iPhone? Okay. Use your iPhone to order a spectrum analyzer.

 

AJ

  • Like 1
Link to comment
Share on other sites

If I wanted to see all the avaliable evdo channels how could I do that on my iPhone? When I use this code it just tells me what channel I am on.

 

 

Thanks.

AJ is right. All phones I have seen will only tell you what channel you are presently on. Spectrum Analyzers are great to see everything within the analyzers range.

Link to comment
Share on other sites

  • 3 weeks later...

So I have a few questions about Field test.

 

1) what is the best dBm.

2) My Field Test show 1x and 1xEV-DO so this means I don't have eHRPD on my tower? If that even means that. I am a newbie at this so bare with my lack of understanding.

3) What does 3G fall under? 1x, 1xEV-DO or none?

4) If possible which one of these is the fastest and how fast they run? Did I miss one?

 

Thank you for answering my questions, I don't expect them all to be answered, but it will help me better understand them.

 

photo2.png

Edited by LookInToMyEyes
Link to comment
Share on other sites

So I have a few questions about Field test.

 

1) what is the best dBm.

2) My Field Test show 1x and 1xEV-DO so this means I don't have eHRPD on my tower? If that even means that. I am a newbie at this so bare with my lack of understanding.

3) What does 3G fall under? 1x, 1xEV-DO or none?

4) If possible which one of these is the fastest and how fast they run? Did I miss one?

 

Thank you for answering my questions, I don't expect them all to be answered, but it will help me better understand them.

 

 

1. The best dBm varies from device to device, however, I have never seen anything greater than -65dBm on an iPhone. (This is partly because I don't get around to too many towers, and I live in weaker signal areas.)

 

2. The iPhone won't tell you if you have eHRPD on your local towers due to the fact that the iPhone 4/4S lacks LTE.

 

3. 3G is EV-DO.

 

4. 1x shows what tower you are connected to as well as what frequency you are connected to as well. 1xEV-DO shows the frequency that you are connected to as well. They both show other things such as the tower identifiers like base station id. I don't have my friends iPhone in front of me right now to check the rest.

  • Like 1
Link to comment
Share on other sites

1. The best dBm varies from device to device, however, I have never seen anything greater than -65dBm on an iPhone. (This is partly because I don't get around to too many towers, and I live in weaker signal areas.)

 

2. The iPhone won't tell you if you have eHRPD on your local towers due to the fact that the iPhone 4/4S lacks LTE.

 

3. 3G is EV-DO.

 

4. 1x shows what tower you are connected to as well as what frequency you are connected to as well. 1xEV-DO shows the frequency that you are connected to as well. They both show other things such as the tower identifiers like base station id. I don't have my friends iPhone in front of me right now to check the rest.

 

Thank you very much, you sir was of great help. I now understand things better.

Link to comment
Share on other sites

 

Thank you very much' date=' you sir was of great help. I now understand things better.[/quote']

 

You're welcome.

 

I still wish i had a better understanding than what i have now.

 

Sent from my LG Viper 4G LTE using Forum Runner

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Checked just now and found a 56MB GP System update pending...will follow up after install.    Edit:  Confirmed that this one moved from August to September 1 after updating.
    • Are you sure that's Direct to Cell? That sounds like the 911 center was offline and they got brought back online via a Starlink uplink. Which also makes way more sense than Direct to Cell for that area.
    • More details/pics: https://www.si.com/nfl/saints/news/saints-fans-to-enjoy-new-nfl-experience-with-massive-wireless-tech-upgrade-at-caesars-superdome-01j5yb9yd5xr https://www.businesswire.com/news/home/20240822812168/en/MatSing-Lens-Antennas-Enhance-Connectivity-at-Caesars-Superdome-Ahead-of-New-Orleans-Saints-Season https://www.nola.com/news/business/itll-be-easier-to-call-text-inside-superdome-thanks-to-80m-wireless-upgrade-what-to/article_bf2dd66c-4f85-11ef-9820-b3c36c831099.html
    • T-Mobile Fires Back At AT&T After Their Statements On T-Priority
    • February is always closer than you think! https://stadiumtechreport.com/news/caesars-superdome-gets-matsing-deployment-ahead-of-super-bowl-lix/ Another Super Bowl, another MatSing cellular antenna deployment. Caesars Superdome, home of the NFL’s New Orleans Saints, has deployed a large number of cellular antennas from MatSing as part of an effort to increase wireless network capacity ahead of the upcoming Super Bowl LIX in February, 2025. It is the third such deployment of MatSing equipment at Super Bowl venues in as many years, following cellular upgrades at Allegiant Stadium for Super Bowl LVIII and at State Farm Stadium for Super Bowl LVII. According to the Saints, the MatSing antennas were part of a large wireless overhaul this offseason, done primarily “to satisfy fans’ desires for wireless consumption and bandwidth,” an important thing with Super Bowl LIX coming to the venue on Feb. 9, 2025. Each year, the NFL’s big game regularly sets records for wireless data consumption, with a steady upward progression ever since wireless networks were first put into stadiums. https://www.neworleanssaints.com/news/caesars-superdome-transformation-2024-new-orleans-saints-nfl-season-part-1-wifi-upgrades-wireless-cellular During the offseason renovation project, the foundation of the facility's new Distributed Antenna System (DAS) was the installation of 16 multi-beam, wideband spherical lense antennas that are seven feet in diameter and weigh nearly 600 pounds apiece, a model called the MatSing MS-48H180. Another 16 large antenna spheres of varying sizes and frequencies have also been installed for a total of 32 new large antennas, in addition to 200 cellular antennas inside and around the building, all of these products specifically made for high-density environments such as stadiums and arenas. The DAS system's performance is expected to enhance further as it becomes fully integrated throughout the season. The MatSing MS-48H180 devices, with a black color that matches the Caesars Superdome's roof, each were individually raised by hoist machines to the top of the facility and bolted into place. Each cellular antenna then transmits 48 different beams and signals to a specific area in the stadium, with each sphere angled differently to specifically target different coverage areas, allowing increased, consistent coverage for high-density seating areas. In addition to creating targets in seating and common areas throughout the stadium, these antennas create dedicated floor zones that result in improved coverage to the field areas for fans in 12 field-level suites and the Mercedes-Benz End Zone Club, teams and on-field media and broadcast elements. The project is also adding 2,500 new wireless access points placed in areas such as concourses, atriums, suites and food and beverage areas for better WiFi coverage.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...