Jump to content

LG G Flex 2 [FCC ID ZNFLS996]


NateC

Recommended Posts

Wait I thought it could do 2 carrier of 20mhz on b41? Is it that important to have even more than 2 carriers at this point? From what I had read its 32gb internal, plus additional support for more with a microsd. And its a device with a 5.5" screen 1080p is overkill anyway, just saying. Lol

 

The table may have been expanded for clarity or I just focused on the "Total maximum bandwidth of 20Mhz" (I originally quoted the table but that was removed).   I will now wait for reviews / actual usage.

  • Like 1
Link to comment
Share on other sites

So is it confirmed that this phone is full CCA compliant? I live in a market where if the speculation about US Cellular joining CCA with Sprint is true, it would be a massive perk for me. Is this a safe phone to buy if that happens?

Link to comment
Share on other sites

So is it confirmed that this phone is full CCA compliant? I live in a market where if the speculation about US Cellular joining CCA with Sprint is true, it would be a massive perk for me. Is this a safe phone to buy if that happens?

 

based on what i can tell by the graph that was posted, yes it is fully CCA compliant and will work with USCC LTE. I'm in the same boat you are in that would be a huge boost to sprint around here if it comes to pass :D my yearly upgrade is up in february (have the 1st flex), hopefully this is out by then as i will most likely be getting it :)

Link to comment
Share on other sites

I am out of the upgrade mode on the new plans with 3 lines on LG G2's all bought from Swappa. I've basically decided not to do any upgrades from the G2 unless it is fully CCA compliant. I'm really in no hurry unless roaming with US Cellular goes live and then I would buy something the next day.

  • Like 1
Link to comment
Share on other sites

I am out of the upgrade mode on the new plans with 3 lines on LG G2's all bought from Swappa. I've basically decided not to do any upgrades from the G2 unless it is fully CCA compliant. I'm really in no hurry unless roaming with US Cellular goes live and then I would buy something the next day.

 

comparing the graph posted in this thread to the graph in this article

 

http://s4gru.com/index.php?/blog/1/entry-373-teaser-x-marks-the-spot-for-the-first-sprint-ccarrpp-fully-compliant-handset/

 

it looks like the flex 2 is fully CCA compliant.

Link to comment
Share on other sites

I'm only asking this out of curiosity.  Since this is CCA compliant, it appears the LTE bands it supports is also T-Mobiles (B2, B4, and B12).  Does this mean that this device could essentially run on T-Mobile's network if unlocked from Sprint (or another SIM-Unlock method)? 

 

I'm not wanting to jump ship - but my brother has a HSPA+ only phone and I'd like to see what he'd get speed-wise on LTE in my area on T-Mobile.

Link to comment
Share on other sites

I'm only asking this out of curiosity. Since this is CCA compliant, it appears the LTE bands it supports is also T-Mobiles (B2, B4, and B12). Does this mean that this device could essentially run on T-Mobile's network if unlocked from Sprint (or another SIM-Unlock method)?

 

I'm not wanting to jump ship - but my brother has a HSPA+ only phone and I'd like to see what he'd get speed-wise on LTE in my area on T-Mobile.

It should be fully compatible, with the likely exception of T-Mobile's version of WiFi-calling. I'm not sure if their VoLTE would work.

 

Sprint phones already work just fine on T-Mo 2G + W-CDMA if they've been successfully unlocked (like my S4 has been), so LTE should be no different. The question was raised earlier in this thread, however, if Sprint will domestically unlock this phone upon request, if it turns out the release date is mid-February or later. The prevailing opinion seems to be that they won't, citing the device's earlier period of "development" that predates 2/11.

  • Like 1
Link to comment
Share on other sites

I'm only asking this out of curiosity.  Since this is CCA compliant, it appears the LTE bands it supports is also T-Mobiles (B2, B4, and B12).  Does this mean that this device could essentially run on T-Mobile's network if unlocked from Sprint (or another SIM-Unlock method)? 

 

I'm not wanting to jump ship - but my brother has a HSPA+ only phone and I'd like to see what he'd get speed-wise on LTE in my area on T-Mobile.

 

This presumed Sprint variant LG G Flex 2 does not support band 4 W-CDMA 1700+2100.  So, outside of LTE coverage, it will not be fully functional on the T-Mobile network.

 

AJ

  • Like 1
Link to comment
Share on other sites

This presumed Sprint variant LG G Flex 2 does not support band 4 W-CDMA 1700+2100.  So, outside of LTE coverage, it will not be fully functional on the T-Mobile network.

 

AJ

I've thrown custom ROMs on my G2 and it has WCDMA that maxes out I think at 14mbps (haven't checked the band).  Does that mean this device has less compatibility with global usage than the G2 when not on LTE? (Outside the US?) 

Link to comment
Share on other sites

I've thrown custom ROMs on my G2 and it has WCDMA that maxes out I think at 14mbps (haven't checked the band).  Does that mean this device has less compatibility with global usage than the G2 when not on LTE? (Outside the US?) 

 

Maybe, but not really.  For W-CDMA, few countries other than the US use band 4 AWS-1 1700+2100 MHz.  Most hitched their wagons to band 1 IMT 1900+2100 MHz.

 

AJ

Link to comment
Share on other sites

This presumed Sprint variant LG G Flex 2 does not support band 4 W-CDMA 1700+2100. So, outside of LTE coverage, it will not be fully functional on the T-Mobile network.

Ah, good catch. While unfortunate, I don't think that omission will be too impactful. By mid-year (if you believe their projections), most full build sites will have B2 and/or B4 LTE with fallback to B2 W-CDMA, and rural GMOs will remain PCS-only for awhile. Some markets that are short on AWS may also start seeing DC-HSPA refarmed down to HSPA+21 for wideband LTE, so that the remaining B4 W-CDMA carrier won't be any faster than the B2 one.

Link to comment
Share on other sites

Do you know if it will be the same as the Sprint model?

 

Nope, not for sure, but the Sprint model includes USCC LTE compatibility, so I assume the models are the same.

Link to comment
Share on other sites

Is their 1900/2100 WCDMA for HSPA+ 42?

What and where?

 

AJ

Link to comment
Share on other sites

There's a b1 2100 but USA doesn't use it

There's no 1900/2100 combo

 

Band 1 is 1900+2100 MHz and has been for about 15 years.

 

AJ

Link to comment
Share on other sites

Sorry, I meant for T-Mobile US.  I thought AWS was 1700/2100, I didn't know of a combo of 1900/2100.  Is HSPA+ 42 the only thing that would be lacking on T-Mobile with this device?

 

To keep things simple, let us just refer to band 2 PCS and band 4 AWS.  T-Mobile has refarmed some of its band 4 AWS for LTE, moving some W-CDMA over to band 2 PCS -- but not everywhere across its network.  The fallback on a device without band 4 W-CDMA will be somewhat compromised on T-Mobile.

 

AJ

  • Like 1
Link to comment
Share on other sites

I think that I've decided this will be the device that replaces my G2. I can't find a good reason not to at this point. I need to have lollipop by the spring because I plan to install an aftermarket Android Auto deck so this phone seems like the winner.

Link to comment
Share on other sites

I think that I've decided this will be the device that replaces my G2. I can't find a good reason not to at this point. I need to have lollipop by the spring because I plan to install an aftermarket Android Auto deck so this phone seems like the winner.

 

same here, my yearly upgrade is up on 2/1/15, so unless HTC comes out with a new phone that wows me between now and the Flex 2 being available, i'll be getting this phone :)

Link to comment
Share on other sites

same here, my yearly upgrade is up on 2/1/15, so unless HTC comes out with a new phone that wows me between now and the Flex 2 being available, i'll be getting this phone :)

My only complaint about this device is the exclusives.  It'll only be for AT&T/Sprint.  This means a lot less development for the device and I like to tinker with my androids.

Link to comment
Share on other sites

I'm curious to know...which android auto head unit do you plan on installing and why.

 

Thanks

I am not sure yet but have some Google Alerts set up for the Pioneer, Kenwood & Parrot units that were announced at CES. Which one I ultimately select will be based on features and price. I have a bit of a unique application in that this will be replacing a 2-DIN Jensen unit in a motorhome which uses the touch screen for a backup camera image so I need to make sure that the device supports backup cameras.

 

I also do not have any steering wheel audio controls or voice recognition keys so I will need to pick one that provides all of that for me.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...