Jump to content

Apple iPad Air 2 Owners Thread


burnout8488

Recommended Posts

None. Switching carriers on an iPad is no different than switching wifi networks. It's just a different data connection. iMessage doesn't care where the data comes from - it only matters on a phone because the phone number switches when you swap SIMs.

 

Yep.  And this is why the so called "Apple SIM" is not coming to an iPhone near you -- not anytime soon.  As long as traditional circuit switched voice remains in place, think of the routing difficulties.  Some of you are old enough to recall the days shortly before and after WLNP -- if you wanted to port your number, the transition took time and was not seamless.

 

AJ

  • Like 2
Link to comment
Share on other sites

The only thing that I hate is that ATT is giving 3GB for $30. Sprints is $35. These tablet plans need to be redone on Sprint.

  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...

Yes! Launched in South Africa yesterday. No announcement. Our carriers didn't even know it was out and have no plans for it. Rather than wait for the carrier plans to be published, I'm gonna buy cash and do a trade-in deal on my iPad 4 64GB LTE+Wi-Fi.

 

Whoop.

 

 

Sent from my iPad using Tapatalk

  • Like 1
Link to comment
Share on other sites

I held this thing today and played with it while at the Apple Store. Oh my... It's so thin. It still amazes me how thin it was. I did something bad though. With the structural issues and that thing being even thinner than the iPhone 6, but spread out over a lot more surface area.... It's pretty easy to apply light pressure and you can see the screen acting up....

 

I didn't do damage because I'm not an asshole, I just wanted to see how strong it is. Let's just say I'll stick with my iPad 4 for a while. Super thin at the compromise of strength...and I really didn't even try to bend it. Very lightly.

 

Hope Apple beefs it up next year with some titanium or something

 

 

Sent from my iPhone 6 on Crapatalk

  • Like 2
Link to comment
Share on other sites

Hope Apple beefs it up next year with some titanium or something

 

 

Sent from my iPhone 6 on Crapatalk

Funny you should say that. At my company I work in R&D. We're currently in the process of preparing several various grades of titanium sheet for either the manufacturers directly or companies that supply to the manufacturers for Apple and HTC. Apparently Apple has been none too happy with this 'Bendgate' controversy and is considering moving from anodized aluminum to titanium for a the body of a future iPhone Plus. I don't know if it would be for next year, but I'd guess the 2016 model would be more likely. I also don't know if it would only be for the Plus, I also don't know if it would transfer to the iPad as well.

 

Sent from my SM-N900P using Tapatalk

  • Like 3
Link to comment
Share on other sites

Funny you should say that. At my company I work in R&D. We're currently in the process of preparing several various grades of titanium sheet for either the manufacturers directly or companies that supply to the manufacturers for Apple and HTC. Apparently Apple has been none too happy with this 'Bendgate' controversy and is considering moving from anodized aluminum to titanium for a the body of a future iPhone Plus. I don't know if it would be for next year, but I'd guess the 2016 model would be more likely. I also don't know if it would only be for the Plus, I also don't know if it would transfer to the iPad as well.

 

Sent from my SM-N900P using Tapatalk

Boy, Vegas surprises me again. :lol: Hopefully your company doesn't go thru what GT Advanced went thru with the sapphire deal.

 

 

Sent from Josh's iPhone 6+ using Tapatalk

Link to comment
Share on other sites

Boy, Vegas surprises me again. :lol: Hopefully your company doesn't go thru what GT Advanced went thru with the sapphire deal.

 

 

Sent from Josh's iPhone 6+ using Tapatalk

 

I doubt it. While being a supplier to Apple would be a nice feather in the cap, either way our largest customers will continue to be GE, Rolls Royce, Pratt & Whitney, etc. Plus, to supply them we wouldn't have to come up with some new method to produce the product. The company has been producing titanium since WWII, we've pretty much got the process nailed at this point.  ;)

 

What's amazing to me though is that in this race by Apple and others to make these phones and tablets thinner and thinner, nobody thought ahead of time, "Gee, maybe we should start using a stronger material to compensate for the thinness". Instead they waited until the 6+ (allegedly) started flexing and bending to figure it out. Oh well, better late than never I guess. 

  • Like 1
Link to comment
Share on other sites

I held this thing today and played with it while at the Apple Store. Oh my... It's so thin. It still amazes me how thin it was. I did something bad though. With the structural issues and that thing being even thinner than the iPhone 6, but spread out over a lot more surface area.... It's pretty easy to apply light pressure and you can see the screen acting up....

 

I didn't do damage because I'm not an asshole, I just wanted to see how strong it is. Let's just say I'll stick with my iPad 4 for a while. Super thin at the compromise of strength...and I really didn't even try to bend it. Very lightly.

 

Hope Apple beefs it up next year with some titanium or something

 

 

Sent from my iPhone 6 on Crapatalk

I don't get the thought process behind the quest to make these devices thinner and thinner, and this goes for pretty much every manufacturer. I would much rather have a slightly thicker/heavier phone/tablet if it allowed a larger battery and better durability.
  • Like 4
Link to comment
Share on other sites

I don't get the thought process behind the quest to make these devices thinner and thinner, and this goes for pretty much every manufacturer. I would much rather have a slightly thicker/heavier phone/tablet if it allowed a larger battery and better durability.

Its all a spec war. If apple didnt change a spec it would look to similar to the past. I do wish theyd keep the same thicknes and get better battery life in todsys devices. Most put a case on their device, so thickness isnt really a concern.
Link to comment
Share on other sites

Picked up my white Air 2 64GB LTE+Wi-Fi at 2pm today. Got a 10% discount off the iStore price through my company. Sweet.

 

Now to camp till midnight so I can switch to my unused "midnight" mobile data to do an iCloud restore.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Ugh. So the SIM tool changed. It's now smaller and round. I used the old "standard" one not having any idea it had changed and graunched the metal. :(

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Ugh. So the SIM tool changed. It's now smaller and round. I used the old "standard" one not having any idea it had changed and graunched the metal. :(

 

 

Sent from my iPad using Tapatalk

 

Ouch! That's not good. I had to look up that word you used. Never heard that one before.

Link to comment
Share on other sites

Luckily it really is just the little pin hole that got damaged. I'd like to order a new SIM tray to restore order. :(

 

Here's the two SIM tools side by side. The old square pin damages the pin hole in the SIM tray.

 

b353aa96d6172682934f2da2bfd67bb1.jpg

 

Another thing I've just noticed. The new charger is 10W compared to 12W on my iPad 4. Anyone able to explain this, as well as implications of using 12W?

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

 

 

Luckily it really is just the little pin hole that got damaged. I'd like to order a new SIM tray to restore order. :(

 

Here's the two SIM tools side by side. The old square pin damages the pin hole in the SIM tray.

 

b353aa96d6172682934f2da2bfd67bb1.jpg

 

Another thing I've just noticed. The new charger is 10W compared to 12W on my iPad 4. Anyone able to explain this, as well as implications of using 12W?

 

 

Sent from my iPad using Tapatalk

You can use any size charger provided it outputs the correct voltage and has the minimum required amp output. Higher amp output will allow the device to charge faster if it is capable of drawing additional current.

Link to comment
Share on other sites

Don't you wonder though why the need for a new charger when they could have used the old 12W?

 

 

Sent from my iPad using Tapatalk

2A is probably sufficient for the device, 2.4A will just allow it to charge faster if the charging circuit is capable of drawing the extra current. Remember, it's voltage that fries stuff. You could have a 200A power supply, as long as its the same 5V, the device is only going to draw what it can. The new ipad air has a smaller battery than last year's model, that might have something to do with why they provided a different charger.

Link to comment
Share on other sites

  • 2 weeks later...

Is it possible to see band information on the new iPads?

Sent from my iPad using Tapatalk

I think that's an iOS limitation on all iPads - as far as I know, there's no access to field test mode on any of them (like on the iPhone for example). Very annoying!

Edited by GoWireless
Link to comment
Share on other sites

Is it possible to see band information on the new iPads?

 

 

Sent from my iPad using Tapatalk

 

 

I think that's an iOS limitation on all iPads - as far as I know, there's no access to field test mode on any of them (like on the iPhone for example). Very annoying!

 

As of now, there is no way of accessing Band information on an iPad without jailbreaking said device and installing Signal 2 "if you purchased it in the past". Newer iOS versions are "not supported".

Link to comment
Share on other sites

  • 2 weeks later...

I received a 16GB WiFi iPad2 for a 10 year anniversary gift from work the other day.  I took it back to Best Buy for a store credit so I can upgrade with more storage after the first of the year.  I looked around the store while I was there and was surprised that the cellular model at Best Buy was only 30 dollars more than WiFi only.  I may need to invest in one since the cost is not that much more though I will not activate the cellular part at this time just in case I need it in the future.  Already have the hotspot active on my iPhone.

Link to comment
Share on other sites

I received a 16GB WiFi iPad2 for a 10 year anniversary gift from work the other day.  I took it back to Best Buy for a store credit so I can upgrade with more storage after the first of the year.  I looked around the store while I was there and was surprised that the cellular model at Best Buy was only 30 dollars more than WiFi only.  I may need to invest in one since the cost is not that much more though I will not activate the cellular part at this time just in case I need it in the future.  Already have the hotspot active on my iPhone.

I'm still waiting for them to give free hotspot to ED plans. <3 I feel it'll happen.

Link to comment
Share on other sites

Ugh. So the SIM tool changed. It's now smaller and round. I used the old "standard" one not having any idea it had changed and graunched the metal. :(

 

 

Sent from my iPad using Tapatalk

Just sold my iPad 4 and when putting everything together, I checked for the SIM pin tool. Imagine my surprise when I saw the "newer" rounded one was already sold with the iPad 4. Oops. :(

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • I think it is likely that T-Mobile will be forced to honor any existing US cellular roaming agreements in those areas as a condition of them taking over the spectrum.  In that case, there would be no improvement of service unless T-Mobile improves the service offering in those areas.
    • My understanding is the MNO carriers are the one who have objected to the use of cell phones in commercial planes.  I understand that it ties down too many cell phones at once, thus I can not see this changing. However this depends on how it is structured. Use of a different plmn for satellite service might make it possible for planes only to connect with satellite. Private pilots have been using cellphones in planes for many decades. Far fewer phones at a lower altitude.
    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...