Jump to content

Uh, oh...AT&T's Network Deployment hits a major snag :)


bigsnake49

Recommended Posts

I've seen att adding new antennas in my area recently. Glad they are because I may I have to move to them since my Sprint is still unbearable to use here.

I hope they can get it together because I'd return.

I stayed in Arlington for a few days a couple months ago and b25 seemed to be humming along okay. 3G was slow as molasses during peak times, but I wasn't surprised there. I have a history of falling back to 1x when the 3G congestion was too bad, though I haven't needed that option since getting a tri-band LTE phone. I think band 41's capacity will probably definitely help ease congestion, though I didn't get any while I was there :(

Link to comment
Share on other sites

I stayed in Arlington for a few days a couple months ago and b25 seemed to be humming along okay. 3G was slow as molasses during peak times, but I wasn't surprised there. I have a history of falling back to 1x when the 3G congestion was too bad, though I haven't needed that option since getting a tri-band LTE phone. I think band 41's capacity will probably definitely help ease congestion, though I didn't get any while I was there :(

Data isn't so much the issue, but it's the extremely late texts and calls that never come through. B41 is excellent in the city and parts of MD you can find it. B26 is there too but needs tuning.

Link to comment
Share on other sites

Data isn't so much the issue, but it's the extremely late texts and calls that never come through. B41 is excellent in the city and parts of MD you can find it. B26 is there too but needs tuning.

Are you using Google Voice integration?

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

I've started just using Google Hangouts Message as text to most of the people I text with so I can still text/message people using other devices besides my phone.  Like my tablets and my laptop.  I miss Google Voice integration, and this is the next best thing.

 

Robert

Link to comment
Share on other sites

In another observation I have recently discovered about AT&T LTE, at least in my area, the LTE GCI Hex equals the AT&T Site Number + Two Digit Sector Number.  I sure wish that was the case for Sprint!  Makes LTE signal spotting painless and precise.  I don't know if this is only true of my market or AT&T Alcatel Lucent markets, or all AT&T markets.  But I like it.  Take note of that, John Saw.   :tu:

 

Robert

I see ATT LTE is starting to show up on sensorly in western SD, have you had opportunity to try it? Is it 5X5 band 17 there?

Link to comment
Share on other sites

I see ATT LTE is starting to show up on sensorly in western SD, have you had opportunity to try it? Is it 5X5 band 17 there?

I'm the one who has mapped most of the Sensorly LTE coverage in South Dakota, except I-29 north of Brookings. Most of it is Band 17. Some of it is Band 4 and 5 though. All have been 5x5, so far. Although AT&T can do 10x10 Band 17 in Rapid City with their new purchase of Long Lines Wireless.

 

They just started installing LTE in Rapid City. I'm watching the spectrum analyzer to see if it comes up 10MHz channels from the beginning.

 

Robert via Nexus 5 using Tapatalk

Link to comment
Share on other sites

I'm the one who has mapped most of the Sensorly LTE coverage in South Dakota, except I-29 north of Brookings. Most of it is Band 17. Some of it is Band 4 and 5 though. All have been 5x5, so far. Although AT&T can do 10x10 Band 17 in Rapid City with their new purchase of Long Lines Wireless.

 

They just started installing LTE in Rapid City. I'm watching the spectrum analyzer to see if it comes up 10MHz channels from the beginning.

 

Robert via Nexus 5 using Tapatalk

I drug one or two of them out a bit down the interstate in SD for you. ;)

 

It was a nice surprise to see AT&T added 10x10 of AWS band on my home site while I was gone and it wasn't even needed. It is an easy install though. Mount three RRUs, wire into existing squid box on tower rack, attach RRU to existing AWS antenna sitting idle.

 

I saw some guys hanging antennas on an AT&T site in Mississippi that was HSPA only. I also ran into some guys doing AT&T band 4 work at the hotel I stayed at in Little Rock AR. Definitely not seeing this work stoppage talked about.

  • Like 2
Link to comment
Share on other sites

I drug one or two of them out a bit down the interstate in SD for you. ;)

 

It was a nice surprise to see AT&T added 10x10 of AWS band on my home site while I was gone and it wasn't even needed. It is an easy install though. Mount three RRUs, wire into existing squid box on tower rack, attach RRU to existing AWS antenna sitting idle.

 

I saw some guys hanging antennas on an AT&T site in Mississippi that was HSPA only. I also ran into some guys doing AT&T band 4 work at the hotel I stayed at in Little Rock AR. Definitely not seeing this work stoppage talked about.

A new one went live in Plankinton, SD after you went through on Wednesday but before I went through on Friday. They're moving quickly around here. Hopefully it means ALU is actively integrating right behind crews.

 

Robert via Nexus 5 using Tapatalk

Link to comment
Share on other sites

They just started installing LTE in Rapid City. I'm watching the spectrum analyzer to see if it comes up 10MHz channels from the beginning.

 

Wait, what spectrum analyzer?  I am starting to feel jealous about my role at S4GRU.

 

;)

 

AJ

Link to comment
Share on other sites

Wait, what spectrum analyzer? I am starting to feel jealous about my role at S4GRU.

 

;)

 

AJ

I shouldn't say my spectrum analyzer. I should have said Travis's spectrum analyzer. Which I am borrowing.

 

Robert via Nexus 5 using Tapatalk

  • Like 2
Link to comment
Share on other sites

It was a nice surprise to see AT&T added 10x10 of AWS band on my home site while I was gone and it wasn't even needed.

 

I saw some guys hanging antennas on an AT&T site in Mississippi that was HSPA only.

I noticed that ATT had widened their band 4 LTE to 10 MHz wide last I was in Baton Rouge. And I know that they are moving all UMTS to 850 and taking PCS for LTE soon, if not now.

 

Where in MS are they still overlaying LTE?

Link to comment
Share on other sites

I noticed that ATT had widened their band 4 LTE to 10 MHz wide last I was in Baton Rouge. And I know that they are moving all UMTS to 850 and taking PCS for LTE soon, if not now.

 

Where in MS are they still overlaying LTE?

Yes, they have a 5mhz pair in AWS but after the Cricket purchase was approved they moved over to the 10mhz pair in AWS. I haven't seen them go back and light up the 5mhz pair yet.

 

In Mississippi I saw them South of Natchez working on finishing Highway 61. In the last few months they have lit up band 17 in the St Francisville, Angola, Jackson, Clinton, etc rural areas North of Baton Rouge. I have mapped some of it on Sensorly recently.

Link to comment
Share on other sites

 Definitely not seeing this work stoppage talked about.

 

Here neither (Myrtle Beach)... they are building up the city right now and fast with LTE OVER THE TOP of Horry Telephone Co... I wonder if it was a buildout requirement -- or they are really doing it for the tourists -- or if they now have control over HTC here finally..

Link to comment
Share on other sites

My area only needs permits for brand new sites so I rarely check for things.  Occasionally I'll see VZW or AT&T permits for new builds.  I saw this one this morning.  It's 3500 feet from another B4/B17 LTE site, not a low signal area by any means.  Nice to see proof that permits are still moving forward.

 

$185,000.00
07/21/2014
13100 COURSEY BLVD
At&t Wirless
119 Veterinarian Rd
Lafayette LA
3378966392
 
DYNAMIC TOWER SERVICES, INC.
421 Sonnier Road
Carencro LA 705203375652270
0.00
Install a new monopole cell tower 115' height with 138 sf. building for electrical equipment. and a new 50KW generator with 173 gallon diesel tank. Must have 5' from any structure or opening.

Link to comment
Share on other sites

Nobody said that their regular overlay was not going well, but their capex was reduced, so there was some slowdown.

 

I think it's going to largely affect their WCS and CA deployment if anything.  It doesn't seem to be impacting their initial deployment of Band 17/4/5 nationwide.  I came across my first Band 5 AT&T site this weekend in Kadoka, SD.

 

Robert

Link to comment
Share on other sites

I think it's going to largely affect their WCS and CA deployment if anything. It doesn't seem to be impacting their initial deployment of Band 17/4/5 nationwide. I came across my first Band 5 AT&T site this weekend in Kadoka, SD.

 

Robert

I'll be going through there in a couple weeks definitely have to schedule a fuel stop there. I've never been on band 5

 

Sent from my XT1060 using Tapatalk

Link to comment
Share on other sites

I'll be going through there in a couple weeks definitely have to schedule a fuel stop there. I've never been on band 5

 

Sent from my XT1060 using Tapatalk

I nearly drove off the road when I saw Band 5 on my LTE Engineering screen Friday evening. I wasn't expecting it. They had Band 4 active there for the past month. But Band 5 just went active in Kadoka this past week. It's the first time I've seen Band 5 myself.

 

Both Band 4 and Band 5 are only 5MHz channels there. But that should be ample for a town that size. In fact, one 5MHz LTE carrier would be enough.

 

7eguba3e.jpg

 

Robert via Nexus 5 using Tapatalk

Link to comment
Share on other sites

I'll be going through there in a couple weeks definitely have to schedule a fuel stop there. I've never been on band 5

 

Sent from my XT1060 using Tapatalk

 

Never seen that myself either.  I've only heard it's out there in areas.  I've seen the typical band 17, band 4, and quite a bit of band 2 I've seen popping up in various areas as well.

Link to comment
Share on other sites

Never seen that myself either. I've only heard it's out there in areas. I've seen the typical band 17, band 4, and quite a bit of band 2 I've seen popping up in various areas as well.

And you were so close. Missed it by 48 hours!

 

Robert via Samsung Note 8.0 using Tapatalk Pro

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...