Jump to content

Sprint and Fixed Wireless Broadband


linhpham2

Recommended Posts

Holy cow! 10k? Sheesh Iwould get Towerstream over that any day ! I didnt realize it cost 10k for a half mile of Cable and such. Gues theyd have to get permits, and such too

 

Blue Ridge Communications stops cable 1/2 mile down my road here in PA.  There is actually a set of telephone poles it could follow to get to my house, with maybe 2 they would need to install.  I filled out a petition and got my 10 neighbors to sign it.  They quoted us with $26k to get us cable - they wanted to put up their own poles!  Said if they used the ones that were there (which carry telephone and power!) it would be a "waste" - even though that would include 2 additional homes.

 

We're using a Mifi 500 on 3G until Verizon puts in a DSLAM for us - which is supposed to happen by 10/25/14 (according to PA state law.)

Link to comment
Share on other sites

Sprint awhile back used MMDS, I believe on the same spectrum they're using now for WiMAX/TD-LTE. Which would explain the propagation issues.

As reference for everyone, MMDS is basically the former name for BRS/EBS.

 

AJ

  • Like 1
Link to comment
Share on other sites

Seems appropriate to add this here.  Not much a story, but it's all I've found so far.  Sprint's Chairman says Sprint and Dish and are in talk about a fixed wireless broadband alliance.

 

http://finance.yahoo.com/news/softbank-dish-talks-regarding-wireless-141910776.html

 

If I find something more detailed I'll add it. 

 

The last paragraph of this story covers it.  Nothing really there to this story.  Just that they're talking.

 

http://www.fiercewireless.com/story/softbanks-son-cca-carriers-we-need-fight-back/2014-03-27

  • Like 1
Link to comment
Share on other sites

They no longer have Internet because Cox disconnected their service for high use.

 

Highly recommend Cox home office. Therefore you will have unlimited data with static IPs. You can then use Ubnt point to point to share. We have seen prices for 100Mbps download 20 mbps for $300 with static IPs. My home 100mb for $89. Not much far off to get around the

 

 

They have different pricing but yes the service is not cheap. Given the amounts of data, it is just a price of doing business and yes it's about 10 times the amount Clearwire gets from me each month

 

 

I never had a speed issue with Clear and I am blessed with good enough speeds. Still hoping on a fixed solution from Sprint.

 

 

They don't want to cover just one. If I had an appartment complex on my land, the connection would be free

Have them get Cox home office product. 100Mbps for $300. That will get you around the high usage limit with unlimited data. You can get static IPs for a few bucks more and then use Ubnt air fiber to share.

We have deployed this solution and works great. My Cox at home is 100Mbps is $89 month and Cox Business around $300 month.

 

High usage only means you have to get on a business plan. Cox home office is their small business plans or just got with the regular business plans.

Link to comment
Share on other sites

you should be able to get a T1 (or 3) for less than 800/month.

 

Since they are able to get Cox home, they can just get the Cox business service.  It is still cheaper than getting T1's.

Link to comment
Share on other sites

Since they are able to get Cox home, they can just get the Cox business service.  It is still cheaper than getting T1's.

 

Again I can't get Cox and my neighbor got just booted off Cox for using actually 215 MB on average. He was the last house with Cox service and if I want their service, I need to run a line which cost $$$$. DSL is also not really working because I am too far from the last pop. Wireless is currently the only option and again I am hopeful that Sprint will do a Fixed wireless solution together with Dish.

Link to comment
Share on other sites

Again I can't get Cox and my neighbor got just booted off Cox for using actually 215 MB on average. He was the last house with Cox service and if I want their service, I need to run a line which cost $$$$. DSL is also not really working because I am too far from the last pop. Wireless is currently the only option and again I am hopeful that Sprint will do a Fixed wireless solution together with Dish.

 

Try Cox business. Just tell them you have home office.  If you sign a 60 month deal they will build it.  They want to see ROI.  Your neighbor can get Cox service through business.  May require a 2 year deal though.

 

Give it a shot with their business department.  Again, just tell them you have a small business and want their Cox Home Office pricing.

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

http://www.fiercewireless.com/story/dish-ntelos-aim-launch-fixed-td-lte-network-july-later-expected/2014-05-09

 

 

 

Dish and nTelos have said they will initially launch the service in markets where they have a high concentration of customers: Roanoke, Staunton, Waynesboro and Charlottesville, Va. The service uses nTelos' 2.5 GHz spectrum, and Hyde has said the service might be sold as a standalone service or bundled with nTelos' wireless service or Dish's satellite TV service. nTelos has a total wireless footprint covering 6 million POPs.

 

 

Getting pretty interesting

  • Like 3
Link to comment
Share on other sites

I have long supported the idea that Sprint use EBS for fixed broadband with or without Dish. It might be easier if they used Dish's dishes to install antennas and thus guaranteeing better signal. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...