Jump to content

LTE Plus / Enhanced LTE (was "Sprint Spark" - Official Name for the Tri-Band Network)


Recommended Posts

 

So let me ask it in a different way. For my situation my house is somewhat in between a triangle of three different towers. The closest is about 4' date='500ft away, the middle is 8,000ft and the furthest is 10,000ft. Is there any good way to determine if I can receive strong enough reception based on these distances? I'm trying to decide if I should switch from AT&T to Sprint. My wife is on Sprint and has not been happy with her service but I think with the improvements things are going to be much better. She still hasn't felt things are any better which is making me nervous so I'm trying to understand if part of the problem is that our house is just too far from nearby towers and short of Sprint building a new tower (not gonna happen), we won't ever really be happy with the performance.

 

Thanks.[/quote']

 

Two things. First, what is your average 1x signal strength? With that information I should be able to tell you whether you will get LTE at your home.

 

Second, personally I don't care whether I have LTE in my home. I care about whether I have LTE in the places I go. What are you going to use LTE for in your home?

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

  • Like 1
Link to comment
Share on other sites

4500ft is less than 1 mile, and the other 2 are within 2 miles from your house. You should have excellent coverage. Unless of course your house framing is made of metal. Then that could really cause problems. One question: Can you see the closest tower from your house?

 

No, I live in a fairly wooded area so I certainly can't see anything close to that far. Perhaps if I was standing on my roof...

 

Two things. First, what is your average 1x signal strength? With that information I should be able to tell you whether you will get LTE at your home.

 

Second, personally I don't care whether I have LTE in my home. I care about whether I have LTE in the places I go. What are you going to use LTE for in your home?

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

 

You are correct, LTE in my house won't really matter since we have good internet. I was saying LTE more referring to my home celluar signal. My wife drops calls constantly and it hasn't really gotten any better. How can I check the 1x Signal Strength? Are you just referring to the number of bars? That is typically 1 or 2 bars for her phone. If there is some other way she has an Evo Shift.

 

Thanks.

Link to comment
Share on other sites

You are correct, LTE in my house won't really matter since we have good internet. I was saying LTE more referring to my home celluar signal. My wife drops calls constantly and it hasn't really gotten any better. How can I check the 1x Signal Strength? Are you just referring to the number of bars? That is typically 1 or 2 bars for her phone. If there is some other way she has an Evo Shift.

 

Thanks.

 

I need the 1x signal strength in dBms. Go into your phone dialer, enter ##DEBUG# Then go to 1x Engineering. Then there should be a number in there next to RSSI. Or you can download the CDMA Field Test App. Open it and get the number next to CDMA RSSI.

 

Robert

Link to comment
Share on other sites

I need the 1x signal strength in dBms. Go into your phone dialer, enter ##DEBUG# Then go to 1x Engineering. Then there should be a number in there next to RSSI. Or you can download the CDMA Field Test App. Open it and get the number next to CDMA RSSI.

 

Robert

 

My wife is out for a while but I'll try it later. Is that the code for the Evo Shift? I saw you post that for Galaxy type phones. Are they all the same? Thanks.

Link to comment
Share on other sites

My wife is out for a while but I'll try it later. Is that the code for the Evo Shift? I saw you post that for Galaxy type phones. Are they all the same? Thanks.

 

It's pretty much the same for all phones, except the Galaxy Nexus.

 

Robert

Link to comment
Share on other sites

If those bar on the phone are not data strength, in a way when you are near the tower and its 5 bar, then the LTE should be strong too in a way?

 

That would tend to be true -- but only if your LTE connection is coming from the same tower as your 1x connection. That may or may not be true in any specific case. It is less likely to be true today, when all towers handle 1x but only some handle LTE.

Link to comment
Share on other sites

If those bar on the phone are not data strength, in a way when you are near the tower and its 5 bar, then the LTE should be strong too in a way?

 

No. Not at all. There is a good chance you are not connected to the same tower for 1x and LTE. So, it is not likely for the signal to be the same. Also, even if you are connected to LTE and 1x from the same site, 1x signal goes quite a bit farther from the site than LTE. So the farther from the site, the more the discrepency in signal being indicated. For both of these factors, relying on the signal strength indicator to determine LTE signal strength is always a faulty proposition. Anytime it is correct, it is just a coincidence, in the way that even a broken clock shows the correct time twice per day.

 

Robert

Link to comment
Share on other sites

Thanks Robert. There is no app out there that can read data strength and put it at the top of the task bar?

 

No. I am not aware of anything. The limitation is in the Android API. Unless this changes in Key Lime.

 

Robert

Link to comment
Share on other sites

Does anyone remember how old Verizon phones showed two separate bars for "1X" and "EV"?

 

VZW practically had to have separate signal strength meters for CDMA1X and EV-DO because, in most markets, VZW initially deployed CDMA1X in Cellular 850 MHz and EV-DO in PCS 1900 MHz. Sprint, on the other hand, has always had both CDMA1X and EV-DO in PCS 1900 MHz, so separate meters have not been necessary.

 

AJ

  • Like 1
Link to comment
Share on other sites

Thanks Robert. There is no app out there that can read data strength and put it at the top of the task bar?

 

I used to run a ROM that had an option to have the signal in dBm in the task bar in the place of bars.

 

It might have been CM9 or a mod... I can't recall.

  • Like 1
Link to comment
Share on other sites

So, stock, your phone does not show LTE strength. What about in CM9/CM10? CM9/CM10 signal bars show data signal. Would your phone then show your LTE signal when you are connected?

 

Sent from my Evo 4G LTE going through AnthraX withdrawal!

Link to comment
Share on other sites

Thanks Robert. There is no app out there that can read data strength and put it at the top of the task bar?

 

No. I am not aware of anything. The limitation is in the Android API. Unless this changes in Key Lime.

 

Robert

 

The difficulty for an app developer is the lack of a standardized API within Android itself for LTE. It is possible to get LTE signal strength by means of trickier calls to workarounds to collect the data in the first place to support different devices. But the workarounds are there. Otherwise, for example, Sensorly could not harvest LTE signal strength data for its purposes of uploading data to the Sensorly site. About the only LTE-related data that is available is the fact that an LTE connection exists, and its signal strength.

 

[EDIT: I may be giving Sensorly too much credit here. I have read elsewhere that maybe the app only logs a Yes/No value for whether an LTE connection (or any other type of connection) exists for a particular timestamp and location. That is, Sensorly ignores signal strength values and plots an arbitrary fuzzy area around these points. So I need further research to be sure of what Sensorly itself really does.]

 

[EDIT: A subsequent release of Sensorly does collect signal strength data.]

 

AFAIK, there is no related detail available for LTE covering other elements such as an identifier for the tower radio and its location, as there is for CDMA and GSM. So it is the logging function (in Netmonitor, CDMA Field Test, etc.) that is crippled for LTE.

  • Like 2
Link to comment
Share on other sites

So' date=' stock, your phone does not show LTE strength. What about in CM9/CM10? CM9/CM10 signal bars show data signal. Would your phone then show your LTE signal when you are connected?

 

Sent from my Evo 4G LTE going through AnthraX withdrawal![/quote']

 

That's a good question. Since CM doesn't support dialer codes and you cannot access your Debug Menu/Engineering screens, its going to be very difficult to confirm whether the CM signal strength indicator is valid for LTE. It will likely require a second LTE device for confirmation.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

I need the 1x signal strength in dBms. Go into your phone dialer, enter ##DEBUG# Then go to 1x Engineering. Then there should be a number in there next to RSSI. Or you can download the CDMA Field Test App. Open it and get the number next to CDMA RSSI.

 

Robert

 

I got into the Engineering Screen and 1x Engineering. I didn't see anything for CDMI RSSI but I did see Rx Power. I'm assuming this is the same. For the few mins I had it open in bounced between -90 and -102 with the normal reading being between -95 and -98.

 

One other thing I saw was the Band # was Sleep Mode. Not sure if that is supposed to say that.

 

Thanks.

Link to comment
Share on other sites

I got into the Engineering Screen and 1x Engineering. I didn't see anything for CDMI RSSI but I did see Rx Power. I'm assuming this is the same. For the few mins I had it open in bounced between -90 and -102 with the normal reading being between -95 and -98.

 

One other thing I saw was the Band # was Sleep Mode. Not sure if that is supposed to say that.

 

Thanks.

 

You will likely be right on the edge of LTE 1900 service. But you will have a better LTE experience on LTE 800 when it gets deployed on your site.

 

You will probably see your LTE service go in and out inside your home, but will probably remain steady outside.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

Link to comment
Share on other sites

That's a good question. Since CM doesn't support dialer codes and you cannot access your Debug Menu/Engineering screens, its going to be very difficult to confirm whether the CM signal strength indicator is valid for LTE. It will likely require a second LTE device for confirmation.

 

Robert via CM9 Kindle Fire using Forum Runner

 

Don't the apps such as AnyCut and Quick Shortcut Maker work with the custom ROMs? These shortcut apps just bypass the dialer to launch all the same hidden utility apps.

Link to comment
Share on other sites

Don't the apps such as AnyCut and Quick Shortcut Maker work with the custom ROMs? These shortcut apps just bypass the dialer to launch all the same hidden utility apps.

 

It could be. However, the last time I tried back on CM7 and my OG EVO, I couldn't get anything to work.

 

Robert

Link to comment
Share on other sites

I am curious, how does the wimax devices like evo 4g/3d show both wimax and 1x signal in the status bar?

 

It would be up to the ROM developer (the OEM in the case of a stock ROM). On my old Epic 4G, using the stock ROM with Touchwiz interface, the Wimax signal was depicted with a little dynamic 4G icon that had a few concentric "radio-looking" waves emanating outward. Not very precise.

 

Under the hood, the phone had a dedicated Wimax API completely separate from the standard Android telephony API, and the special Wimax API made the signal diagnostics available to app developers. Of course, mostly only Sprint phones had Wimax, so apps would have to be written with that in mind.

Link to comment
Share on other sites

You will likely be right on the edge of LTE 1900 service. But you will have a better LTE experience on LTE 800 when it gets deployed on your site.

 

You will probably see your LTE service go in and out inside your home, but will probably remain steady outside.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

 

Thanks although the thing that does concern me more is the voice call performance. Is there any way through the engineering screen to determine if the tower has the new backhaul turned on?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Hopefully this indicates T-Mobile hasn't completely abandoned mmwave and/or small cells? But then again this is the loop, so take that as you will. Hopefully now that most macro activity is done (besides rural colo/builds), they will start working on small cells.   
    • This has been approved.. https://www.cnet.com/tech/mobile/fcc-approves-t-mobiles-deal-to-purchase-mint-mobile/  
    • In the conference call they had two question on additional spectrum. One was the 800 spectrum. They are not certain what will happen, thus have not really put it into their plans either way (sale or no sale). They do have a reserve level. Nationwide 800Mhz is seen as great for new technologies which I presume is IOT or 5g slices.  T-Mobile did not bite on use of their c-band or DOD.  mmWave rapidly approaching deadlines not mentioned at all. FWA brushes on this as it deals with underutilized spectrum on a sector by sector basis.  They are willing to take more money to allow FWA to be mobile (think RV or camping). Unsure if this represents a higher priority, for example, FWA Mobile in RVs in Walmart parking lots working where mobile phones need all the capacity. In terms of FWA capacity, their offload strategy is fiber through joint ventures where T-Mobile does the marketing, sales, and customer support while the fiber company does the network planning and installation.  50%-50% financial split not being consolidated into their books. I think discussion of other spectrum would have diluted the fiber joint venture discussion. They do have a fund which one use is to purchase new spectrum. Sale of the 800Mhz would go into this. It should be noted that they continue to buy 2.5Ghz spectrum from schools etc to replace leases. They will have a conference this fall  to update their overall strategies. Other notes from the call are 75% of the phones on the network are 5g. About 85% of their sites have n41, n25, and n71, 90% 5g.  93% of traffic is on midband.  SA is also adding to their performance advantage, which they figure is still ahead of other carriers by two years. It took two weeks to put the auction 108 spectrum to use at their existing sites. Mention was also made that their site spacing was designed for midrange thus no gaps in n41 coverage, while competitors was designed for lowband thus toggles back and forth for n77 also with its shorter range.  
    • The manual network selection sounds like it isn't always scanning NR, hence Dish not showing up. Your easiest way to force Dish is going to be forcing the phone into NR-only mode (*#*#4636#*#* menu?), since rainbow sims don't support SA on T-Mobile.
    • "The company’s unique multi-layer approach to 5G, with dedicated standalone 5G deployed nationwide across 600MHz, 1.9GHz, and 2.5GHz delivers customers a consistently strong experience, with 85% of 5G traffic on sites with all three spectrum bands deployed." Meanwhile they are very close to a construction deadline June 1 for 850Mhz of mmWave in most of Ohio covering 27500-28350Mhz expiring 6/8/2028. No reported sightings.  Buildout notice issue sent by FCC in March 5, 2024 https://wireless2.fcc.gov/UlsApp/letterPdf/LetterPdfController?licId=4019733&letterVersionId=178&autoLetterId=13060705&letterCode=CR&radioServiceCode=UU&op=LetterPdf&licSide=Y&archive=null&letterTo=L  No specific permits seen in a quick check of Columbus. They also have an additional 200Mhz covering at 24350-25450 Mhz and 24950-25050Mhz with no buildout date expiring 12/11/2029.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...