Jump to content

LG G2 -- the first Sprint tri band LTE handset (was "LG Optimus G2")


Thai

Recommended Posts

I don't like the defenders because the rubber shell starts to gets loose and not fit around the hard piece all the way. Also the parts that cover the ports start to tear up also.Sent from my Nexus 7 using Tapatalk 4

Fortunately, they have lifetime warranties on their cases, but I agree. The flap over my head phone port has been tearing as of late. That's why I decided to try out the Ballistic Maxx case to see if it is more durable.

Link to comment
Share on other sites

Fortunately, they have lifetime warranties on their cases, but I agree. The flap over my head phone port has been tearing as of late. That's why I decided to try out the Ballistic Maxx case to see if it is more durable.

I've done the warranty exchange once with my EVO 3d. Then when I got my EVO LTE the rubberized shell seemed more durable than the last one on my EVO 3D. After a while the same thing happened so I purchased a commuter case it started to wear out too. So now I use Seidio cases.

 

Sent from my Nexus 7 using Tapatalk 4

  • Like 2
Link to comment
Share on other sites

I'm on my 3rd warranty replacement for my evo lte bc of the rubber stretching and the port flaps ripping off.

 

Not sure which case I'll get for me g2.

 

Sent from my EVO using Tapatalk

 

 

Link to comment
Share on other sites

I'm on my 3rd warranty replacement for my evo lte bc of the rubber stretching and the port flaps ripping off.

 

Not sure which case I'll get for me g2.

 

Sent from my EVO using Tapatalk

 

What are your criteria for a case?

Link to comment
Share on other sites

I'm usually really careful with my phone but love the protection otterbox provides, for the random drop or a little kid grabs a hold of ur phone.

 

I might compare the ballistic and similar cases, the rubber stretching gets old, fast....

 

Sent from my EVO using Tapatalk

 

 

Link to comment
Share on other sites

I remember reading an article several years (maybe on Gizmodo) ago where there was a study done and it confirmed that black phones made the screen appear larger because of a masking effect on the bezel (I suppose it's because a black bezel would "blend" into the black screen, creating a false image of largeness). Now that the the G2 essentially has no bezel, I think I'm going to try out a white phone for the first time!

Link to comment
Share on other sites

Well that is the nature of those Otterbox cases.  They have to have flaps to open and close the ports to give it protection when you are not using the ports which is why people like them.  I am not a case guru but I am sure there must be a case out there that gives the Otterbox like protection around the phone but do not have the flaps for the ports.

Link to comment
Share on other sites

New member

Extremely interested in this device.

I had no idea about tri-band until I arrived here about a week ago.  Haven't been able to stop reading.

 

I'm interested in knowing if a tri-band device (specifically the G2) would help things out, as far as receiving LTE.  At home I usually get between .70 - 1.60 mbps, when it stays connected to LTE.  After updating radio and firmware bits for my Evo4GLTE I'm getting between 7 - 20 mbps.  I'm not complaining, but I can't fathom updating radios would cause such a bump.

 

Would the G2 be a good choice given my area?  East of Kansas City, in Blue Springs, MO.  About 1/2 mile north of the intersection of 7 highway and Colbern Road.

 

Look forward to any responses.

Thanks

  • Like 1
Link to comment
Share on other sites

Are there any 2600 mhz towers broadcasting LTE in Portland Oregon?

 

No.  Not yet.  Portland was an early WiMax market and the equipment used in the beginning of WiMax deployment is not a simple upgrade.  It involves new base stations and RRU's.  These sites will be converted some time next year.

 

Robert

Link to comment
Share on other sites

No. Not yet. Portland was an early WiMax market and the equipment used in the beginning of WiMax deployment is not a simple upgrade. It involves new base stations and RRU's. These sites will be converted some time next year.

 

Robert

How about Boston? Same deal? I believe they were part of the first wimax cities too.

 

Sent from my SPH-L720 using Tapatalk

 

 

Link to comment
Share on other sites

How about Boston? Same deal? I believe they were part of the first wimax cities too.

 

Sent from my SPH-L720 using Tapatalk

 

It appears so.  I don't see any Boston sites in the first phase of Clearwire TD-LTE deployment.

 

Robert

Link to comment
Share on other sites

Seidio FTW!

 

'cept I don't know if they make one for the G2 (Sprint flavor), do they?

As long as it fits the AT&T/T-Mobile version, it will fit the Sprint version.

  • Like 1
Link to comment
Share on other sites

That makes such little sense to remove a mic for no apparent reason. Either way, having the cutout really doesn't make much difference.

Link to comment
Share on other sites

So I checked today what version or G2 was at my Best Buy, demo phone . It is the Sprint model. Lol. It's been sitting in our cabinet for a few weeks and I didn't even realize what model it was.

 

Sent from my SPH-L720 using Tapatalk

 

 

  • Like 3
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...