Jump to content

Network Vision/LTE - DFW Market (Dallas/Ft. Worth/Wichita Falls)


purpleunicorn

Recommended Posts

 

I measured it using htc's hidden menu option. would it help to through up a screenshot?

 

Nope. You told me what I needed to know. Which speed test servers do you use?

 

Robert via Samsung Note II via Tapatalk

 

 

Link to comment
Share on other sites

 

Using the Speedtest.net app it shows I'm connected to the Dallas server

 

I've been using the BlahHosting server in Dallas the past week or so. It is the most reliable of the remaining servers.

 

I used to use the MoeRadio in Dallas and the OneSource in Ft. Worth servers before that. They were much better and more consistent than BlahHosting and SoftLayer. But BlahHosting has had inconsistency issues lately. But it is still better than SoftLayer.

 

I hope MoeRadio and OneSource come back. They were the best speed test servers in the area. Whatever you do, avoid the Comcast ones. They are horrible at peak times.

 

Robert via Samsung Note II via Tapatalk

 

 

Link to comment
Share on other sites

I've been using the BlahHosting server in Dallas the past week or so. It is the most reliable of the remaining servers.

 

I used to use the MoeRadio in Dallas and the OneSource in Ft. Worth servers before that. They were much better and more consistent than BlahHosting and SoftLayer. But BlahHosting has had inconsistency issues lately. But it is still better than SoftLayer.

 

I hope MoeRadio and OneSource come back. They were the best speed test servers in the area. Whatever you do, avoid the Comcast ones. They are horrible at peak times.

 

Robert via Samsung Note II via Tapatalk

 

Thanks for the info. how do i connect to different towers/servers from the phone?

Link to comment
Share on other sites

 

Thanks for the info. how do i connect to different towers/servers from the phone?

 

Within the Speedtest app, click on the Tools button at the bottom. Then click on Change Server at the top. You may want to try some other Texan servers the next time your speed drops with a strong signal. It will help you rule out issues with the Speedtest server. I can sometimes have over a 10Mbps difference with LTE on some servers.

 

Speedtests are only as fast as the weakest link. And sometimes the weakest link is the server itself if it gets busier than it can handle. The best speed test results have a broad sampling of servers.

 

Robert via Samsung Note II via Tapatalk

 

 

Link to comment
Share on other sites

Within the Speedtest app, click on the Tools button at the bottom. Then click on Change Server at the top. You may want to try some other Texan servers the next time your speed drops with a strong signal. It will help you rule out issues with the Speedtest server. I can sometimes have over a 10Mbps difference with LTE on some servers.

 

Speedtests are only as fast as the weakest link. And sometimes the weakest link is the server itself if it gets busier than it can handle. The best speed test results have a broad sampling of servers.

 

Robert via Samsung Note II via Tapatalk

 

Oh i see thanks you! Wow such a big difference between some of these. so when i change server and run a test does it stay connected to that one?

Link to comment
Share on other sites

 

Oh i see thanks you! Wow such a big difference between some of these. so when i change server and run a test does it stay connected to that one?

 

It will usually keep it for awhile. However, after awhile it will revert to a default one and you'll have to go back and select another one. Typically the default ones are the busiest because 90% of users will not change servers. So those ones get overloaded and yield less accurate results.

 

Robert via Samsung Note II via Tapatalk

 

 

Link to comment
Share on other sites

It will usually keep it for awhile. However, after awhile it will revert to a default one and you'll have to go back and select another one. Typically the default ones are the busiest because 90% of users will not change servers. So those ones get overloaded and yield less accurate results.

 

Robert via Samsung Note II via Tapatalk

ahh i see thanks. just connected to ft.worth one and just pulled 20mbps.. crazy difference lol

Link to comment
Share on other sites

I have just posted a huge acceptance update for the DFW market. Largest ever. Some 3G, LTE and 800MHz sites. Sponsors can check out some additional details here: http://s4gru.com/index.php?/topic/577-network-vision-site-map-dfw-austin-and-west-texas/page__view__findpost__p__103612

 

Robert

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Question. I'm going to be in the Dallas area over the next few days. Just curious as to what I can expect reasonably from a 3G 1900 MHz perspective? I see that there is a lot of progress, but overall are you guys pretty happy with the areas that have been improved? What are your probably average DL speeds I should expect in the love field airport to central/north dallas area?

 

Thanks.

Link to comment
Share on other sites

  • 1 month later...

I wanted to know when sprint was getting 4G Lte in Denton, Texas because I really need it over here. I have been constantly lied to from sprint about when we are suppose to get it and therefore bought a 4g lte phone. I just want some facts or straight forward information.

Link to comment
Share on other sites

I wanted to know when sprint was getting 4G Lte in Denton, Texas because I really need it over here. I have been constantly lied to from sprint about when we are suppose to get it and therefore bought a 4g lte phone. I just want some facts or straight forward information.

 

Sprint has not likely lied to you. Low level Sprint employees simply do not have reliable information on deployment. But we do. The DFW market is a highly active Network Vision area, and Denton already has three sites with completed LTE upgrades plus two more in progress. Become an S4GRU sponsor, and you can view maps of Network Vision progression in your area and across the country.

 

http://s4gru.com/ind...come-a-sponsor/

 

AJ

Link to comment
Share on other sites

Ok we'll I've talked to managers and representatives and employees and evdo engineering and I get varied dates from all of them that are always wrong. I just want a plain simple answer on when 4g lte would come to Denton since I have never picked it up here and even the coverage map says it doesn't. Plus the 3g towers keep messing up. I've Called 21 times and had about that many tickets opened up and they always say they've fixed it, but it's never fixed which is why I want the 3g.no use in paying 80 dollars a month for no Internet or bad service

Link to comment
Share on other sites

I wanted to know when sprint was getting 4G Lte in Denton, Texas because I really need it over here. I have been constantly lied to from sprint about when we are suppose to get it and therefore bought a 4g lte phone. I just want some facts or straight forward information.

 

A track of LTE just showed up on Sensorly in the Denton area, so you're probably not far off.

Link to comment
Share on other sites

  • 4 weeks later...

Pretty disappointed.  It's been a little over 10 months since I first got an LTE signal.  Coverage is much improved since then.  I'd say I get an LTE signal about 75% of the time anywhere between Fort Worth and Irving.  Unfortunately, though, speeds leave a lot to be desired.  Areas where I'd previously get 20-30 Mbps I'm now getting 203.  And their 3G has gotten atrocious.  I work near the airport and my phone is pretty much worthless anywhere bound by 114, 635, Beltline, and Royal.  Unless things improve drastically by November, I'll be switching to Verizon.  Sorry, Sprint.  I tried to be patient...

Link to comment
Share on other sites

  • 1 month later...

Assuming eastern Ellis County is in the DFW Market, does anybody know if there are towers being upgraded in the Ferris/Palmer area (I45 @ Risinger Rd)?

 

All battery related stats are using a ZeroLemon 7000mah battery.

 

 

Link to comment
Share on other sites

  • 2 months later...

eve5y6e3.jpgCoverage is pretty bad in between Saginaw and Haslett off of Bond's Ranch. We're supposed to be covered, but it looks like the tower near Blue Mound Rd. and Haslett County Line Rd. may be having trouble. I've been trying to open a ticket with Sprint, and I might have finally been successful.

 

Edit: Sorry about the huge screen shot. I uploaded from Tapatalk and couldn't figure out how to make it smaller.

Edited by afazel
Link to comment
Share on other sites

  • 3 months later...
  • 2 months later...

My signal is "fair" on my Galaxy S4

 

Band 26 is what I connect to and the signal sits at -105

 

785256006.png

 

 

The signal on my Galaxy S3 is "poor"

 

It connects to Band 25 with signal strength of around -110

 

785262800.png

 

 

The signal on my Galaxy Tab 3 is "fair"

 

It connects to an unknown band with signal strength of around -104

 

785276014.png

Link to comment
Share on other sites

  • 3 months later...

My current location is near Downtown Dallas.  Currently I have 1 to 0 bars.  Nobody has been able to explain to me WHY, but that everytime I call they are "working on the towers".  Finally I was able to get a boosting device for my home to make calls, but use WIFI for data.  

 

My question is if I stay with Sprint, and get a new tri band device, is there a chance this whole situation will be fixed?

 

I have a Galaxy S2 so I understand why my data service is poor, but why is voice so bad in East dallas (about 2 miles from downtown?)

 

Also, my Galaxy s2 does not work from my skyrapper at work.  I have never made a phone call inside my office tower.  

 

Will a triband device fix this as well (does tri band go through buildings better?)

 

The phone I am consider to extend my contract with sprint is the lg g3.  thanks!!

Link to comment
Share on other sites

My current location is near Downtown Dallas.  Currently I have 1 to 0 bars.  Nobody has been able to explain to me WHY, but that everytime I call they are "working on the towers".  Finally I was able to get a boosting device for my home to make calls, but use WIFI for data.  

 

My question is if I stay with Sprint, and get a new tri band device, is there a chance this whole situation will be fixed?

 

I have a Galaxy S2 so I understand why my data service is poor, but why is voice so bad in East dallas (about 2 miles from downtown?)

 

Also, my Galaxy s2 does not work from my skyrapper at work.  I have never made a phone call inside my office tower.  

 

Will a triband device fix this as well (does tri band go through buildings better?)

 

The phone I am consider to extend my contract with sprint is the lg g3.  thanks!!

A triband device may help with LTE800 being able to travel more, but it may not be on at the tower serving you. Easy upgrade and see if it helps. Are you talking about Wimax signal or voice. I believe the s2's bars relay voice signal. But an airave is good for Voice, and you have WiFi so no Data issue there.
Link to comment
Share on other sites

I've heard there are major issues in Dallas, but even the highest levels of sprint won't tell me what is wrong with the towers.  It has been over 2 years and they keep pushing back the dates on the towers.  I am being service by the Sprint tower on Mockingbird Avenue.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...