Jump to content

Galaxy SIII FCC RF Specs vs. EVO LTE


chappo2000

Recommended Posts

Here if the S4GRU "RF focused technical rundown" of the upcoming Samsung Galaxy SIII:

 

Source: http://s4gru.com/ind...aunch-imminent/

 

  • CDMA1X + EV-DO band classes 0, 1, 10 (i.e. CDMA1X + EV-DO 850/1900/800)
  • LTE band 25 (i.e. LTE 1900; PCS A-G blocks)
  • LTE 5 MHz carrier bandwidth
  • LTE UE category 3
  • SVDO and SVLTE support, including SVDO or SVLTE and simultaneous 802.11a/b/g/n Wi-Fi tether
  • Maximum RF ERP: 17.78 dBm (CDMA1X 850), 20.77 dBm (EV-DO 850), 24.05 dBm (CDMA1X 1900), 23.85 dBm (EV-DO 1900), 17.21 dBm (CDMA1X 800), 17.56 dBm (EV-DO 800), 22.01 dBm (LTE 1900)
  • NFC antenna integrated into battery
  • LTE antenna configuration: 1 Tx, 2 Rx (i.e. 2x2 downlink MIMO)

 

 

And, of course, the same S4GRU technical rundown for the HTC Evo 4G LTE:

 

Source: http://s4gru.com/ind...fcc-oet-filing/

  • CDMA1X + EV-DO band classes 0, 1, 10 (i.e. CDMA1X + EV-DO 850/1900/800)
  • LTE band class 25 (i.e. LTE 1900; PCS A-G blocks)
  • LTE 5 MHz and 10 MHz channel bandwidths
  • LTE UE category 3
  • SVDO and SVLTE support, including SVDO or SVLTE and simultaneous 802.11a/b/g/n Wi-Fi tether
  • Maximum RF ERP: 20.43 dBm (CDMA1X 850), 18.74 dBm (EV-DO 850), 22.98 dBm (CDMA1X 1900), 18.44 dBm (EV-DO 1900), 20.01 dBm (CDMA1X 800), 18.75 dBm (EV-DO 800), 19.85 dBm (LTE 1900)
  • Antenna gain: -2 dBi (CDMA1X 850/1900/800), -3.5 dBi (EV-DO 850/1900/800 and LTE 1900)
  • LTE antenna configuration 1x2 (i.e. 2x2 downlink MIMO)

Given this excellent information provided to us by S4GRU... how would you say the Galaxy SII radio set compares to the Evo LTE? Is there any indication that the SIII will have the same radio problems that has seemed to plague prior Sammy devices?

 

Any technical insight into how these numbers compare would be appreciated. I'm ready for upgrade and the choice between the Evo and SIII is a hard one to make. I know it's all about what each specific user is looking for, but a significant difference in the build quality or range of the radios might tip the scales in either direction.

 

Thoughts?

 

 

P.S. Credit to "QWIKSTRIKE" for actually asking this question first.

Link to comment
Share on other sites

They are both using the Qualcomm Snapdragon S4 (dual core at 1.5). The S3 has 2 gig ram, vice HTC 1 gig.

 

This is something I would love to see a good technical answer on how big of a deal the sammy radio's are. Having an Epic 4G and my wife's Epic 4G touch, I really want a radio that works well and GPS that works at all!

 

I've been holding on to my final Sprint Premier Gold upgrade since November. Trying to decide if I should upgrade now or wait till late fall/winter and upgrade to a phone in the next batch.

Link to comment
Share on other sites

I'm willing to take a chance on the Samsung's radios. Yes, it only supports 5x5 LTE (I'll bet it could support 10x10 with a firmware upgrade, though I think it will be awhile before Sprint refarms non-G PCS such that they can do 10x10 channels). However it has a removable battery and as much RAM as the cheapie nettop I bought last summer. That's saying something.

 

Doesn't hurt that I also purchased Beautiful Widgets (so i can get a Sense-like clock) a couple years ago, and I just run LauncherPro on my phones anyway :P

Link to comment
Share on other sites

No sense clock for me either. Too big. I have a clock on the top right already. I like the beautiful widgets 1x4 weather better.

 

But... No Sammy for me. The GPS on the epic burned me bad. The GPS on the EVO LTE is friggin amazing! The flakey Sammy radio stack is also another reason. That thing takes its time to flip from roaming to no roaming. I don't blame the hardware, I firmly believe it was all software issues. And how can you release a phone that can't roam on PCS? Another software bug they failed to fix. Guess I should have steered clear when they released the phone with the upload speeds broken and sprint kept saying nothing was wrong with it. I am sure they were just repeating what Sammy was telling them.

 

 

 

 

Sent from my C64 w/Epyx FastLoad cartridge

  • Like 1
Link to comment
Share on other sites

No sense clock for me either. Too big. I have a clock on the top right already. I like the beautiful widgets 1x4 weather better.

 

But... No Sammy for me. The GPS on the epic burned me bad. The GPS on the EVO LTE is friggin amazing! The flakey Sammy radio stack is also another reason. That thing takes its time to flip from roaming to no roaming. I don't blame the hardware, I firmly believe it was all software issues. And how can you release a phone that can't roam on PCS? Another software bug they failed to fix. Guess I should have steered clear when they released the phone with the upload speeds broken and sprint kept saying nothing was wrong with it. I am sure they were just repeating what Sammy was telling them.

 

I noticed the upload speed issue when I first got my Epic. Then I applied the software update and the problem went away.

 

I had GPS issues with the phone, but that was mainly due to running pre-release firmware (e.g. DK28). For the times I've used GPS on the phone recently, it's been fine.

 

I guess I'm also lucky that the roaming I've needed to do on the phone has always been on the cellular band. Go figure.

 

If the SIII ends up having crappy radios, of course I'll take it back and swap it for the Evo, though I'll miss being able to swap batteries when one gets old. I've owned HTC devices before (Mogul, Touch Pro) and they've served me well, with crystal-clear voice quality, etc., and my former roommate's Rezound looks awesome, but there are a few touches on the Samsung (e.g. better camera software) that I want, so I'll try the SIII first :)

Link to comment
Share on other sites

Now where is the RF spec comparison between the Samsung epic and the EVO LTE. I would be very curious to see that one.

 

That would be interesting. I'd look up the FCC docs, but I'm in a lazy mood right now :P

Link to comment
Share on other sites

Here if the S4GRU "RF focused technical rundown" of the upcoming Samsung Galaxy SIII:

 

Source: http://s4gru.com/ind...aunch-imminent/

 

<snipped for brevity>

 

Given this excellent information provided to us by S4GRU... how would you say the Galaxy SII radio set compares to the Evo LTE? Is there any indication that the SIII will have the same radio problems that has seemed to plague prior Sammy devices?

 

Any technical insight into how these numbers compare would be appreciated. I'm ready for upgrade and the choice between the Evo and SIII is a hard one to make. I know it's all about what each specific user is looking for, but a significant difference in the build quality or range of the radios might tip the scales in either direction.

 

Thoughts?

 

As mentioned in the article linked first, those numbers suggest that the SGS3 has a slight edge in transmitting power.

 

The 10 MHz carrier bandwidth, also as mentioned in the article, isn't something that they expect Sprint to deploy during the life of the handsets, so it's basically a don't care.

 

Neither souce link mentioned receiver sensitivity, the other half of the transmit/receive story, so I think what's there is necessary but not sufficient information to decide which radios are going perform better.

  • Like 1
Link to comment
Share on other sites

Neither souce link mentioned receiver sensitivity, the other half of the transmit/receive story, so I think what's there is necessary but not sufficient information to decide which radios are going perform better.

 

And absent tens of thousands of dollars worth of RF test equipment, we will probably never be privy to receiver sensitivity, unfortunately. The FCC requires transmitters be tested (conducted power, radiated power, spurious emissions, etc.) because the FCC has to ensure that authorized devices do not cause undue interference. The FCC does not require receivers be tested, as receivers do not cause interference yet must accept any interference from other transmitters.

 

AJ

  • Like 1
Link to comment
Share on other sites

I was curious (as a former Epic user), so I looked it up.

 

Tx Frequency Range: 824.70 - 848.31 MHz (Cell. CDMA) / 1851.25 - 1908.75 MHz (PCS CDMA)

Max. RF Output Power: 0.288 W ERP Cell. CDMA (24.6 dBm), 0.295 W EIRP PCS CDMA (24.7 dBm)

 

 

I also looked up the info for my current Photon.

 

Tx Frequency Range: 824.70 - 848.31 MHz (Cell. CDMA) / 1851.25 - 1908.75 MHz (PCS CDMA)

Max. RF Output Power: 0.187 W ERP Cell. CDMA (22.71 dBm), 1.297 W EIRP PCS CDMA (31.13 dBm)

 

I dunno what any of it means tho :blink:

Edited by Jaggrey
Link to comment
Share on other sites

I also have a question -- will the SIII be "world phone" as the V's version? :) I rather liked the ability to pop in other operator's SIM while travelling with my Photon and would love to do the same on SIII

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...