Jump to content

Karma Go


MarshieZ

Recommended Posts

I just switched my Go to Neverstop for the next month, as I'll be at my parents' for multiple weekends. If you want a review of the service/experience, skip the next two paragraphs...

 

At my parents', a couple miles outside a town of 10,000 that can get 300M TWC, it's your choice of wireless provider for internet...and none of them are particularly good. Their choice is (and has been for awhile) residential LTE at 4M down, 1M up for $50/mo, unlimited, from a local provider. Said local provider hands out 4G wireless routers with 10/100 Ethernet, 802.11n and an LTE modem that supports band 12...with a couple 5db antennas that take RSSI down to the high -50s, so we're talking about something that's marketed as home broadband here. That company has 5x5 of Band 17 that all their residential customers use; mobile customers on the same provider are limited to HSPA+ last I heard in order to keep the LTE clear for fixed use.

 

All that to say that my hotspot likely has more capacity that it's pulling from than my parents' residential connection...particularly since there's a B41 cell site downtown (I can't reach it out here, but that takes the load off B25/B26).

 

==

 

I've had Karma for on the order of two years, and the Go for on the order of four months, so I know the drill as far as getting connected etc. goes: connect to the network, log in if your MAC isn't remembered on the device, see the splash page showing how much data you have left (I have just over 20GB...I've gotten, and used, 5GB from referrals and 1GB came with the device). In this case, I logged in and then looked for an option to switch to Neverstop...and was told to do it from the app.

 

So I opened the app on my 5X, updated my billing info (the card I used to buy my 20GB of data expired a bit ago), and told it to switch my account to Neverstop. I was asked to confirm the $50 charge, then emailed a payment confirmation. The final screen on my phone for the process said that the month of service would start the next time I logged into my hotspot.

 

So I connected, logged in (pretty sure I was asked to log in even though that particular decide was authed to the network before)...and presented with a screen telling me I was almost ready to use Neverstop. Turns out, the device needs a firmware update (automated reboot required) to get Neverstop going. I let the update load...the ETA was 5-10 minutes and the actual time was within that range. The service helpfully told me I'd get an email when the device was ready to go, and I got an email at the end of the process as promised.

 

At that point, I was forced to log in again (I'm guessing the reflash cleared the MAC table, partially to avoid multiple devices immediately exceeding the three simultaneous device limit)...and was good to go from there on out. The splash screen said I had Neverstop at 5 Mbps;sounds like they'll have higher speed tiers or higher simultaneous device counts as extra-charge options in the future. Speeds on speedtest.net were within a few hundred kbps of 5 Mbps in both directions (yes, 5 Mbps symmetric unlimited LTE for $50/mo!), with uploads being closer to 5M than downloads. Not bad at all considering that's about what I can get on my 5X...or the Go when I'm paying per GB...at this location.

 

I have yet to test how simultaneous connections to the hotspot from different client devices fare; I'd expect the 5 Mbps to be shared between devices, but who knows...maybe the service would allow 15M down spread across three devices if the network can handle it. Will post back here when I test that (shortly!).

  • Like 4
Link to comment
Share on other sites

I just switched my Go to Neverstop for the next month, as I'll be at my parents' for multiple weekends. If you want a review of the service/experience, skip the next two paragraphs...

 

At my parents', a couple miles outside a town of 10,000 that can get 300M TWC, it's your choice of wireless provider for internet...and none of them are particularly good. Their choice is (and has been for awhile) residential LTE at 4M down, 1M up for $50/mo, unlimited, from a local provider. Said local provider hands out 4G wireless routers with 10/100 Ethernet, 802.11n and an LTE modem that supports band 12...with a couple 5db antennas that take RSSI down to the high -50s, so we're talking about something that's marketed as home broadband here. That company has 5x5 of Band 17 that all their residential customers use; mobile customers on the same provider are limited to HSPA+ last I heard in order to keep the LTE clear for fixed use.

 

All that to say that my hotspot likely has more capacity that it's pulling from than my parents' residential connection...particularly since there's a B41 cell site downtown (I can't reach it out here, but that takes the load off B25/B26).

 

==

 

I've had Karma for on the order of two years, and the Go for on the order of four months, so I know the drill as far as getting connected etc. goes: connect to the network, log in if your MAC isn't remembered on the device, see the splash page showing how much data you have left (I have just over 20GB...I've gotten, and used, 5GB from referrals and 1GB came with the device). In this case, I logged in and then looked for an option to switch to Neverstop...and was told to do it from the app.

 

So I opened the app on my 5X, updated my billing info (the card I used to buy my 20GB of data expired a bit ago), and told it to switch my account to Neverstop. I was asked to confirm the $50 charge, then emailed a payment confirmation. The final screen on my phone for the process said that the month of service would start the next time I logged into my hotspot.

 

So I connected, logged in (pretty sure I was asked to log in even though that particular decide was authed to the network before)...and presented with a screen telling me I was almost ready to use Neverstop. Turns out, the device needs a firmware update (automated reboot required) to get Neverstop going. I let the update load...the ETA was 5-10 minutes and the actual time was within that range. The service helpfully told me I'd get an email when the device was ready to go, and I got an email at the end of the process as promised.

 

At that point, I was forced to log in again (I'm guessing the reflash cleared the MAC table, partially to avoid multiple devices immediately exceeding the three simultaneous device limit)...and was good to go from there on out. The splash screen said I had Neverstop at 5 Mbps;sounds like they'll have higher speed tiers or higher simultaneous device counts as extra-charge options in the future. Speeds on speedtest.net were within a few hundred kbps of 5 Mbps in both directions (yes, 5 Mbps symmetric unlimited LTE for $50/mo!), with uploads being closer to 5M than downloads. Not bad at all considering that's about what I can get on my 5X...or the Go when I'm paying per GB...at this location.

 

I have yet to test how simultaneous connections to the hotspot from different client devices fare; I'd expect the 5 Mbps to be shared between devices, but who knows...maybe the service would allow 15M down spread across three devices if the network can handle it. Will post back here when I test that (shortly!).

 

Great review! I'm very happy to hear that the advertised speed is actually what you're getting. Where you getting a full, 3 bar signal? 

 

Looking forward to the rest of the test!

Link to comment
Share on other sites

Does the Karma GO remember your devices or will you have to keep signing on (which is good for sharing)

 

I'm almost positive you'll have to sign-in/log-in every time. But maybe I'm wrong, I don't really pay attention if I have to sign on everytime or not.

Link to comment
Share on other sites

Please post the fcc id so I can look it up. Thanks.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

Where you able to find anything through the FCC for the antenna? 

  • Like 1
Link to comment
Share on other sites

Great review! I'm very happy to hear that the advertised speed is actually what you're getting. Where you getting a full, 3 bar signal? 

 

Looking forward to the rest of the test!

 

All three, but I think the threshold for three signal circles is relatively low. Maybe three or four bars on my N5X. And the hotspot doesn't seem to be a particularly amazing performer RF wise. Decent, but not amazing.

 

Also, outside the house I'm getting 15-16M down, 7M up so the tower isn't capacity-constrained. Though it's not quite the same as the phenomenal throughput I get on the B41+CA tower in town; measured 88M down, 12M up there earlier tonight. Not with the Go though...even if it wasn't throttled to 5M for the time being it doesn't support CA. Hopefully they're building another hotspot that does.

  • Like 1
Link to comment
Share on other sites

I'm almost positive you'll have to sign-in/log-in every time. But maybe I'm wrong, I don't really pay attention if I have to sign on everytime or not.

 

Not actually the case. My laptop is paired up with the hotspot and not only doesn't require re-logging, but also skips the "hang on, Internet magic is happening" screen on-WiFi-connect.

  • Like 1
Link to comment
Share on other sites

Short update, its been a few days with NeverStop now and it's Awesome!

 

Loving my speeds, Pretty much what I got with Clearwire!

 

17cae4ee95.jpg

 

Sprint's Spark is pretty good for low latency too, played a few games (CSGO) and Played through competitive without any lag or studdering

  • Like 1
Link to comment
Share on other sites

Where you able to find anything through the FCC for the antenna?

The results aren't pretty. Antenna gain is anywhere from -2 to -5 dBi, which doesn't help performance. I'll look more to see what else I can dig up later today.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

Link to comment
Share on other sites

The results aren't pretty. Antenna gain is turned down anywhere from 2-5 dBi...

 

Negative, Josh, not positive.  Negative.

 

AJ

Link to comment
Share on other sites

Not actually the case. My laptop is paired up with the hotspot and not only doesn't require re-logging, but also skips the "hang on, Internet magic is happening" screen on-WiFi-connect.

 

Actually now that you say that, you're right. I don't have to log in with my laptop or tablet ever, just after I changed the SSID name for the Wi-Fi name on it.

Link to comment
Share on other sites

The results aren't pretty. Antenna gain is anywhere from -2 to -5 dBi, which doesn't help performance. I'll look more to see what else I can dig up later today.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

Really?? I'm honestly quite surprised. It takes a lot for mine to even show only 2 circles, let alone drop to 3G. 

 

Is there another device we can compare the numbers with to see how it compares? 

Link to comment
Share on other sites

Really?? I'm honestly quite surprised. It takes a lot for mine to even show only 2 circles, let alone drop to 3G.

 

Is there another device we can compare the numbers with to see how it compares?

Not really. I guess the biggest question is, which LTE band are you on most of the time? The antenna gain for Band 41 is -2dBi, Band 25 is -5dBi.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

Link to comment
Share on other sites

Not really. I guess the biggest question is, which LTE band are you on most of the time? The antenna gain for Band 41 is -2dBi, Band 25 is -5dBi.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

Actually probably both. The one tower I frequently use it on is a B25/B26 only and am usually parked on B25. The other is a full NV build tower with a second B41 carrier, and am 99% of the time on B41. The other rare 1% is on B26.

Link to comment
Share on other sites

Actually probably both. The one tower I frequently use it on is a B25/B26 only and am usually parked on B25. The other is a full NV build tower with a second B41 carrier, and am 99% of the time on B41. The other rare 1% is on B26.

Well, and there have been many times devices perform better or worse than what was in the FCC docs, so ymmv.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

Link to comment
Share on other sites

Well, and there have been many times devices perform better or worse than what was in the FCC docs, so ymmv.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

Well since you went through the effort of finding the information, I'll include it in the OP. Do you have the gain for B26? And any other key findings that you found interesting that you'd like me to include?

Link to comment
Share on other sites

Well since you went through the effort of finding the information, I'll include it in the OP. Do you have the gain for B26? And any other key findings that you found interesting that you'd like me to include?

I'll email you on that later.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

  • Like 1
Link to comment
Share on other sites

I'll email you on that later.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

Sounds good, no rush.  :2tu:

Link to comment
Share on other sites

I really like how this Karma service sounds, especially because of their affordable speed-capped pricing model I'm a huge supporter of. I think this is the direction full voice and data services ought to go in, though I personally would like to see the speed options be a bit higher, like around 15mbps. If it were that around $60 monthly, I might consider it.

Link to comment
Share on other sites

I am in the process of revising the original post... adding some more information to it and cleaning it up a bit.

 

Also wanted to make a mention the Karma is running a special until midnight Tuesday 12/1. You can get $50 off and free shipping! 

  • Like 2
Link to comment
Share on other sites

I am in the process of revising the original post... adding some more information to it and cleaning it up a bit.

 

Also wanted to make a mention the Karma is running a special until midnight Tuesday 12/1. You can get $50 off and free shipping!

How much is regular price on it?

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

Link to comment
Share on other sites

How much is regular price on it?

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

 

It is typically $149. So with the current sale and my referral code I can give you, it will bring it down to $89!

  • Like 1
Link to comment
Share on other sites

It is typically $149. So with the current sale and my referral code I can give you, it will bring it down to $89!

I wish I had the money for it, and Sprint LTE use it on.

 

 

Sent from my Gold iPhone 6s Plus 128GB using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...