Jump to content
lilotimz

How to Spot Sprint 8T8R TD-LTE RRHs (Alcatel-Lucent)

Recommended Posts

Can anyone help me identify some cell sites :)

 

http://puu.sh/kwB8t/2040730ef9.jpg

 

What's the little one with three panels and then the larger one next to it? I think it's Sprint or Clear since it kinda looks like the images in this thread.

Share this post


Link to post
Share on other sites

Can anyone help me identify some cell sites :)

 

http://puu.sh/kwB8t/2040730ef9.jpg

 

What's the little one with three panels and then the larger one next to it? I think it's Sprint or Clear since it kinda looks like the images in this thread.

 

3 antenna sector = old nextel iDen

 

Antennas with microwave = someones legacy equipment. 

Share this post


Link to post
Share on other sites

3 antenna sector = old nextel iDen

 

Antennas with microwave = someones legacy equipment. 

 

Ah, Do you know what'll happen to those 3 Antenna sector sites from Nextel, We've got quite a few of them

Share this post


Link to post
Share on other sites

Ah, Do you know what'll happen to those 3 Antenna sector sites from Nextel, We've got quite a few of them

Sold for scrap.

 

Sent from my LG-H790

Share this post


Link to post
Share on other sites

Sold for scrap.

 

Sent from my LG-H790

Ah, Does Sprint still have the lease or whatnot with these decommissioned nextel sites, So they'll be able to stick their equipment up.

Share this post


Link to post
Share on other sites

Ah, Does Sprint still have the lease or whatnot with these decommissioned nextel sites, So they'll be able to stick their equipment up.

If equipment is still present then they're still paying the bills. Tower companies lease space for carriers equipment. They don't care if it'd active or not.

 

Sent from my LG-H790

Share this post


Link to post
Share on other sites

If equipment is still present then they're still paying the bills. Tower companies lease space for carriers equipment. They don't care if it'd active or not.

 

Sent from my LG-H790

Last one, I know Clear is on there somewhere but what are the others?

 

http://puu.sh/kwDb3/725abf7183.JPG

http://puu.sh/kwD9F/9a607bc588.JPG

Share this post


Link to post
Share on other sites

New 2.5 radio revision just in today.

 

RRH8x20-B

 

Mostly internal changes and externally identicle.

 

 

+3dBm (.002W) to 43dBm (20W) for 20MHz BW or +40dBm (10W) for 10MHz BW

 

Varied by Software and channel aggregation for contiguous 20+20MHz, and 20+20+20MHz and Non-contiguous 20+20MHz and 20+10MHz all for maximum aggregate power of 43dBm (20W)

Share this post


Link to post
Share on other sites

New 2.5 radio revision just in today.

 

RRH8x20-B

 

Mostly internal changes and externally identicle.

Is sprint going to be using those for future deployment?

 

Sent from my Nexus 5X

Share this post


Link to post
Share on other sites

Is sprint going to be using those for future deployment?

 

Sent from my Nexus 5X

Mostly intraband contigious 20+20+20 carrier aggregation. 

 

The others are options for markets that have different 2.5 holdings. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

    • By lilotimz
      Samsung TDD-LTE gear which are being utilized in Clearwire priority sites. .   Clearwire - Samsung TDD-LTE RRH SLS-BD106Q & Antennas           Samsung TD-LTE RRUs mounted behind BRS/EBS Antenna     Sprint 2500-2600 mhz TD-LTE Setup Note the Antennas are much thicker and fatter than the antennas being utilized by Sprint Network Vision.  
       

       
      Clearwire TD-LTE Base Station / Cabinet
      May be subject to change as TD-LTE sites start being integrated into the Network Vision setups.
       

       

       

       
      Happy Hunting!
        I'll clean the post up this weekend when I have more time.   Courtesy of Sbolen from Missouri market. Samsung TDD RRH SLS-BD104Q1
      Samsung TDD RRH SLS-BD106Q
    • By lilotimz
      Here are the Alcatel-Lucent (ALU) Network Vision equipment for Sprint. Their equipment consists of 2x base stations, 6 or 9 Remote Radio Unit (RRU) setups, and 1 standard NV antenna of with connectors on the bottom (4x PCS, 2x SMR). 

      Below are images of Alcatel-Lucent equipment. In these images, you will find Alcatel-Lucent base stations, Sprint Network Vision antennas, PCS 1900 & SMR 800 RRUs, and their configurations.
      Alcatel-Lucent 4x40w 25 MHz PCS 1900 B25 RRUs (Panasonic) [old]

      Alcatel-Lucent  4x45w 1900 MHz B25 RRU 

      ALU 2x50w B26 800 MHz RRU [KMW Communications]

      Older Panasonic Setup [4x40w 25 MHz B25]




      Standard Alcatel-Lucent Setup 
      Utilizes 2x50w 800 MHz B26 RRU and 4x45w 1900 MHz B25 RRU and compatible antennas. 



      Closer Look at the connectors on the bottom of the antennas

      Special Case Mexican IBEZ Setup
      Note the lack of 800 MHz RRUs though the antennas are capable of 800 MHz. 


      High Capacity Setup


      High Capacity no SMR 800 IBEZ setup


      * Credits go to those whom took the images of these equipment. You know who you are."
    • By jakeuten
      Just a bit of insight. I live near UMD in Duluth, MN. Sprint's signal is clearly much 'dirtier' with a 1.0 SNR compared to T-Mobile's 20.4 SNR. I don't have a screenshot from the same time, but I get about a 22 to 29 SNR with T. I know that AT&T uses RRU's but I'm not too sure about Sprint or T-Mobile. Also, I didn't even know they had L2500 where I live, but I force checked it on my Samsung S7 (AT&T). 


    • By S4GRU
      Did you know that with many Sprint (Uniband) LTE Android devices, the signal strength indicator at the top does not show your LTE signal strength? Even if 4G or LTE is displayed next to it?
       
      That's right!  This signal displayed here is your 1x (voice signal), and it is not your 3G EVDO signal strength, nor your LTE signal strength.  Regardless of whether it says 3G or 4G next to it. This is the cause of a lot of confusion.  Also, third party apps like NetMonitor do not show accurate LTE signal strengths. They also only show the 1x signal strength, even though they may reference being connected to LTE.
      The purpose of this thread is to help educate the masses, because many people think they have a strong LTE signal, when in fact they do not. And then they are unhappy, thinking that Sprint LTE is really slow, even with a strong signal. LTE performance is very signal strength dependent. So, when you have a weak signal, you can expect much slower than peak results.
       
      There is only one accurate way to get your LTE signal strength, and that is from your LTE Engineering screen in your Debug menu. And we will discuss the different ways to get that below.
       
      ...In HTC, Motorola & LG Sprint LTE devices:
      Go in to your phone app, and dial ##DEBUG# Select LTE Engineering Go down to RSRP. The number under RSRP shown in dBm is your LTE signal strength. ...In Samsung Sprint LTE devices:
      Go in to your phone app, and dial ##DEBUG# Enter 777468 for your lock code Select LTE Engineering Go down to RSRP. The number next to RSRP shown in dBm is your LTE signal strength. ...In the Galaxy Nexus, Nexus 5:
      Go in to your phone app, and dial *#*#DEBUG#*#* Enter 777468 for your lock code Select LTE Engineering Go down to RSRP. The number next to RSRP shown in dBm is your LTE signal strength. The LTE Signal Strength Scale:
       
      Now you have determined your actual LTE signal strength in dBms your device is receiving, you can use the following scale below to determine its strength:
      Better than -88dBm RSRP is a strong signal Between -89dBm and -96dBm is a very good signal Between -97dBm and -105dBm is good Between -106dBm and -112dBm is fair Worse than -113dBm RSRP is poor Feel free to link people to this thread for explanation. Hopefully, this will clear up some confusion out there!
       
       
  • Posts

    • I signed up for Sprint's unlimited kickstart plan and noticed there is a lot of "extended network" coverage near me. Today was the first chance I had to test it when I left native coverage. It switches to US Cellular but all I got was the R indicator on my phone. Same indicator when it switches to Verizon. I have my settings as Automatic for network instead of Home only. I also have data roaming turned off. Basically my question is, how can I know when I am on extended network instead of roaming? Most of the coverage west of me shows extended network with very little roaming areas. I don't want to get charged for roaming on accident. 
    • I say what a wase to design turn to fail in 5 years instead of design then to last for a long time better for environment
    • Nice set of CA combos! I'm guessing it's 2x2 only right? I'm waiting for a 4x4 modem with those CA combos or better (4x+ CA) to be more future proofed, since the AT&T tower I'm using now doesn't have 4x4 yet or even B4/66 (adjacent ones do). I'm just not sure how to orient the antennas for 4x4... Sent from my Pixel 3 XL using Tapatalk
    • They're in a low enough orbit that they should burn up within a year or two I think if they don't boost their altitude. They're designed to deorbit quickly upon failure. And I believe they're also designed to only last like 5 years before needing replaced due to running out of fuel? At least SpaceX's are. They said they will have to continuingly replace them. So space junk shouldn't be a problem, unless they collide at enough velocity that some pieces are ejected to a higher orbit. But I think studied were performed to show the risk of this is minimal. The bigger issue I believe would be its effect on Earth based visual astronomy (see Starlink "train"). Sent from my Pixel 3 XL using Tapatalk
    • A VPN will skew the results. You should not have a VPN on whole doing speed test mapping. VoLTE will not matter, they operate on different EUTRA sessions https://s4gru.com/entry/439-sprints-casting-call-of-voice-over-actors-an-in-depth-analysis-of-volte-calling-and-vowifi/ it shouldn't even be able to tell that you have VoLTE on. That being said, if you're on an active VoLTE call, then that may affect things. Recently, Sprint started preferring dropping to band 26 during tower handoffs while on a VoLTE call. So a call may start out on B41, but if you're moving, when it hands off to the next tower it often switches to B26. This improves VoLTE performance and quality, but will result in slower data speeds and showing B26 available instead of b25 or b41 in your mapping. Congestion on B26 has no effect at all on VoLTE calls, but will be reflected in speed tests performed while on the call   Sent from my Pixel 3 XL using Tapatalk          
  • Recently Browsing

    No registered users viewing this page.

×
×
  • Create New...