Jump to content

Find LTE status for a specific tower?


Recommended Posts

I have used opensignalmaps to determine that my EVO original 3G is connected to tower identified as SSID= 7891 SID = 4120. How can I found out if LTE service has been activated at that specific location. I am ready to upgrade my phone, but it is pointless if there is still no LTE in my vicinity. Thanks.

Link to comment
Share on other sites

I have used opensignalmaps to determine that my EVO original 3G is connected to tower identified as SSID= 7891 SID = 4120. How can I found out if LTE service has been activated at that specific location. I am ready to upgrade my phone, but it is pointless if there is still no LTE in my vicinity. Thanks.

 

At this point in time I don't think any of those types of apps are gonna be able to give you the information that you are looking for. Let me ask you though, what is the closest intersection to you?

 

Also keep in mind that Dallas is a first round market that is currently live and further lte expansion should happen very quickly.

Link to comment
Share on other sites

located near royal lane/regent blvd, just south of 635 near north end of dfw.

 

Looks like in that general area there several sites scheduled to go live between now and october. If you bought an lte device right now more than likely it would be hit or miss IMO. You could always go to the closest sprint store and see if any of the lte devices are getting a signal.

Link to comment
Share on other sites

  • 9 months later...

S4GRU Sponsors can view our NV Sites Complete thread, which is updated every week to show completed sites. For more information about how to become a S4GRU Sponsor, you can visit this thread.

 

Robert

 

My tower has had 3G, and 800mHz upgraded. I was looking in the engineering screen and it showed I was connected to LTE even though my phone wasn't showing 4G? Had a IP address and when I moved to different areas the signal changed. Was LTE blocked, or am I crazy?

 

https://www.dropbox.com/s/nunavp904lcuocb/2013-05-30%2022.54.41.png

Link to comment
Share on other sites

 

 

S4GRU Sponsors can view our NV Sites Complete thread, which is updated every week to show completed sites. For more information about how to become a S4GRU Sponsor, you can visit this thread.

 

 

Robert

 

 

My tower has had 3G, and 800mHz upgraded. I was looking in the engineering screen and it showed I was connected to LTE even though my phone wasn't showing 4G? Had a IP address and when I moved to different areas the signal changed. Was LTE blocked, or am I crazy?

 

https://www.dropbox.com/s/nunavp904lcuocb/2013-05-30%2022.54.41.png

I've had this occur when I've lost an LTE signal on a Samsung device. Your signal here was really weak, at the edge of service for that LTE cell. So you may have had an LTE connection and didn't notice the icon from moment before, and now it is in the process of dropping, or you've connected to LTE, but your device will not hand over the data connection to it because it keeps going in and out.

 

Robert via Nexus 7 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

My tower has had 3G, and 800mHz upgraded. I was looking in the engineering screen and it showed I was connected to LTE even though my phone wasn't showing 4G? Had a IP address and when I moved to different areas the signal changed. Was LTE blocked, or am I crazy?

 

https://www.dropbox.com/s/nunavp904lcuocb/2013-05-30%2022.54.41.png

 

No, you were not connected to LTE.  The MCC-MNC (151515-1515), uplink EARFCN (83535), and downlink EARFCN (65535) are not valid.  Those are just placeholders.

 

AJ

  • Like 1
Link to comment
Share on other sites

No, you were not connected to LTE.  The MCC-MNC (151515-1515), uplink EARFCN (83535), and downlink EARFCN (65535) are not valid.  Those are just placeholders.

 

AJ

Ok. So you mean that I wasn't ever connected to LTE(at that location), those are just default #'s?

Link to comment
Share on other sites

 

 

No, you were not connected to LTE. The MCC-MNC (151515-1515), uplink EARFCN (83535), and downlink EARFCN (65535) are not valid. Those are just placeholders.

 

AJ

 

 

Ok. So you mean that I wasn't ever connected to LTE(at that location), those are just default #'s?

Those are not default numbers I've ever seen on any Samsung.

 

Robert from Note 2 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

Ok. So you mean that I wasn't ever connected to LTE(at that location), those are just default #'s?

Those are not default numbers I've ever seen on any Samsung.

 

Well, you were not connected to LTE at the time, though you may have been connected to LTE from another site just prior to that time.

 

At the very least, the downlink EARFCN is a null result, as 65535 is the largest possible 16 bit integer.  And I have seen the same null result on an HTC engineering screen shortly before or after an actual LTE connection.

 

AJ

Link to comment
Share on other sites

I've seen that screenshot many times.  The 1515 deal is the radio doing an LTE scan.  The -18.4 SNR is the default for no LTE.  The serving cell will stay populated with the last one you were connected to.

  • Like 1
Link to comment
Share on other sites

located near royal lane/regent blvd, just south of 635 near north end of dfw.

 

The Sensorly maps show Sprint LTE coverage in that area, although not as strong as any of us would want. You would probably get an LTE connection outside, but from inside a building a device would most likely switch to 3G.

 

The above was my situation at my office near 121 & the Tollway until about a week ago Sprint turned on a brand new tower near that intersection.

 

The sponsor area contains separate a maps that show Sprint tower sites regardless of upgrade status, and another map showing what changed at each upgraded tower site.

 

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...