Jump to content

Verizon leasing 28 GHz and 39 GHz spectrum


kineticman

Recommended Posts

New FCC filing:  Verizon Wireless would lease from Nextlink spectrum associated with 93 LMDS (28 GHz) licenses and nine 39 GHz licenses in all or parts of 289 CMAs, covering approximately 63 percent of the U.S. population.

 

"5G" time?

 

 

https://apps.fcc.gov/edocs_public/attachmatch/DA-16-838A1.pdf

 

 

  • Like 2
Link to comment
Share on other sites

I have a feeling that VZW is coming out the gates too early with this technology. Similar to how Sprint did with WiMax. If I was VZW I would wait to see what the GSM carriers around the world does with their 5g tech.

 

Sent from my Nexus 6 using Tapatalk

Link to comment
Share on other sites

28ghz is only 200mhz more than 2600mhz.

 

Sounds like they are trying to copy the success of sprints b41 and call it 5g.

 

we use lmds technology (amongst others, including wimax) to provide fixed wireless service.

Link to comment
Share on other sites

28ghz is only 200mhz more than 2600mhz.

 

Sounds like they are trying to copy the success of sprints b41 and call it 5g.

 

we use lmds technology (amongst others, including wimax) to provide fixed wireless service.

Math is off.

 

28 GHz is 28,000 MHz.

 

2600 MHz is 2.6GHz.

 

Sent from my Nexus 5X

  • Like 3
Link to comment
Share on other sites

Math is off.

 

28 GHz is 28,000 MHz.

 

2600 MHz is 2.6GHz.

 

Sent from my Nexus 5X

 

 

So then it could be 5g if it's 39ghz and 28ghz?? Or could this be for Comcast ?? And wifi? .... Just speculating

Link to comment
Share on other sites

This is definitely for 5G. Verizon has claimed huge success with fixed 5G performance, wants to use it to become a WISP. Part of their master plan to become everyone's cellular provider, ISP nationwide.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...