Jump to content

Sprint Carrier Update Hack (for iPhone 5 Only)


kory108

Recommended Posts

Over the past month or so there has been hacked/tweaked carrier updates released for all the major carriers in the US. iTweakiOS just released the latest one for Sprint. It supposedly increases 3G (not LTE) speeds. I'll be trying it out when I get home tonight and will report back my results.

 

Note: This will work on iPhone 5's that are not jailbroken!

 

http://www.itweakios.com/apps/blog/show/27511053-sprint-carrier-update-hack-iphone-5-only-

 

 

 

This hack enables 1x Advanced and EVDO Rev. B on the iPhone 5 enhancing EVDO 3G data speeds. Though Sprint is limited to EVDO Rev. A, the device itself becomes more open to an increased amount of bandwidth thus allowing for better throughput of data and data connection. Already intact coding within the carrier files also showed signs that Sprint has 1x Advanced support on their network. So, how knows? This may actually enable something new. Throttling code was put in place to limit users to a certain amount of bandwidth on 3G only as well and has now been removed. As for LTE, no throttling codes were put in place to limit users' bandwidth nor was any band preference coding put into place to limit users on coverage. This won't increase signal so don't expect it to like the AT&T version of this hack nor does it increase LTE as it was not limited in the first place.

 

 

  • Like 1
Link to comment
Share on other sites

Over the past month or so there has been hacked/tweaked carrier updates released for all the major carriers in the US. iTweakiOS just released the latest one for Sprint. It supposedly increases 3G (not LTE) speeds. I'll be trying it out when I get home tonight and will report back my results.

 

Note: This will work on iPhone 5's that are not jailbroken!

 

http://www.itweakios.com/apps/blog/show/27511053-sprint-carrier-update-hack-iphone-5-only-

i don't understand how it works but i will try it.

 

Also i will do speed tests pre and post (i will make it a sample).  I will average the speed tests and see if hack worked.

  • Like 2
Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

This isn't a PRL. It is a carrier update file which is what allows for some low level customization of the phone (such as FaceTime over cellular, hotspot functionality, and things like that).

 

 

Sent from my iPhone 5 using Tapatalk

Link to comment
Share on other sites

I just applied this to my iPhone cant test at my house as i have LTE in my area (South St. Louis/ Tower Grove Area) but i'll post updates tomorrow! I work at sprint in Ofallon and 3G data speeds out there are terrible as of the past couple months so im hoping this helps!

Edited by cognitivel0gic
Link to comment
Share on other sites

I never believe these fixes as there isn't a problem with the device being limited if it can max out the Evdo airlink or LTE without mods. The problem is due to having to share the airwaves with all the folks running speedtests.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

Can someone post a speedtest , I want to see if this is worth me doing .

 

I can bet you it's a big fat negative...placebo affect.  Plus what's a speedtest going to tell you with all the variables in place?  You'd have to do this in a controlled environment.

Link to comment
Share on other sites

I can bet you it's a big fat negative...placebo affect. Plus what's a speedtest going to tell you with all the variables in place? You'd have to do this in a controlled environment.

..... Anyways back to what I had asked before.

Edited by IsaiahL
Link to comment
Share on other sites

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

Link to comment
Share on other sites

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

 

1xA should already be enabled.  Or maybe that's why the iPhone is shunned from using 800SMR first like all the other phones.  The funny part is 1xA is going to absolutely zero for your speeds.

Link to comment
Share on other sites

 

 

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

 

 

1xA should already be enabled. Or maybe that's why the iPhone is shunned from using 800SMR first like all the other phones. The funny part is 1xA is going to absolutely zero for your speeds.

I've heard conflicting reports as to whether or not the 800 MHz signal I'm connecting to is 1xA.

 

Either way, my point stands. If it's not enabled, this tweak does nothing. If it is, it still does nothing without an appropriate signal to connect to, as you mentioned before about the iPhone 5 lacking SMR in its PRL.

 

Sent from my SCH-l900 using Tapatalk 2

 

 

Link to comment
Share on other sites

Either way, my point stands. If it's not enabled, this tweak does nothing. If it is, it still does nothing without an appropriate signal to connect to, as you mentioned before about the iPhone 5 lacking SMR in its PRL.

 

Sent from my SCH-l900 using Tapatalk 2

 

Not lacking.  It finally has the ability to use 800SMR but someone at Sprint decided they didn't want the iPhones sitting on the 800SMR channels like other phones.  So the iPhones only use the 800SMR if there is no PCS signal at all.

  • Like 1
Link to comment
Share on other sites

Can someone post a speedtest , I want to see if this is worth me doing .

No hack can speed up Sprint's 3G. 3200kbps is the full on theoretical max data rate over the channel. 

Hope that answers your question. 

Link to comment
Share on other sites

No hack can speed up Sprint's 3G. 3200kbps is the full on theoretical max data rate over the channel.

Hope that answers your question.

Thanks that pretty much answers it .

Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

 

This isn't a PRL. It is a carrier update file which is what allows for some low level customization of the phone (such as FaceTime over cellular, hotspot functionality, and things like that).

 

Sent from my iPhone 5 using Tapatalk

 

How many times do I have to tell people, I'm an iOS developer. The file is in fact an OS X compressed bundle, which you can open to find carrier.prl among other files. Normally, the phone will only accept the bundle if signed by Apple, ensuring none of the files are corrupt or tampered with. This "hack" simply appears to use a debug loading mechanism to bypass that check, so in theory we can modify the PRL. I will try it later and report back.

  • Like 1
Link to comment
Share on other sites

I never believe these fixes as there isn't a problem with the device being limited if it can max out the Evdo airlink or LTE without mods. The problem is due to having to share the airwaves with all the folks running speedtests.

 

Sent from my little Note2

 

What about this?

 

"The hack is said to enable Release 9 DC-HSPA+ on the iPhone 5, opening the device to an increased amount of bandwidth for better throughput of data even though T-Mobile has not upgraded its network to support Release 9. The coders claim their hack bumps up HSPA+ speeds by 3 Mbps to 8 Mbps on the downlink. According to Brown, T-Mobile's HSPA+ network is capable of Release 8 downlink speed of 42 Mbps and Release 6 speed of 5.76 Mbps on the uplink."

 

Read more: T-Mobile iPhone 5 users get faster HSPA+ speeds via hacked software - FierceBroadbandWireless http://www.fiercebroadbandwireless.com/story/t-mobile-iphone-5-users-get-faster-hspa-speeds-hacked-software/2013-05-13#ixzz2VRpFcos1 

Subscribe at FierceBroadbandWireless

Link to comment
Share on other sites

How many times do I have to tell people, I'm an iOS developer. The file is in fact an OS X compressed bundle, which you can open to find carrier.prl among other files. Normally, the phone will only accept the bundle if signed by Apple, ensuring none of the files are corrupt or tampered with. This "hack" simply appears to use a debug loading mechanism to bypass that check, so in theory we can modify the PRL. I will try it later and report back.

 

So what's your findings good buddy?

  • Like 1
Link to comment
Share on other sites

What about this?

 

They are likely seeing higher speeds not because of any upgrade but because their hack puts them on the less burdened PCS W-CDMA carrier(s) instead of the long standing AWS W-CDMA carrier(s).

 

Correlation ≠ causation.

 

AJ

Link to comment
Share on other sites

 

 

What about this?

 

 

They are likely seeing higher speeds not because of any upgrade but because their hack puts them on the less burdened PCS W-CDMA carrier(s) instead of the long standing AWS W-CDMA carrier(s).

 

Correlation ≠ causation.

 

AJ

Shouldn't TMO's network automatically do this?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...