Jump to content

Network Vision/LTE - Richmond & Southern Virginia Markets


darrellbooker

Recommended Posts

Charlottesville is definitely Central VA, and its not listed (yet?!). In fact, I don't see "Central VA" even on that page. It's really the Richmond area, Hampton Roads, and the Shenandoah Valley (which extends east only as far as Waynesboro).

Link to comment
Share on other sites

ntelos list Central va as active 4G LTE

 

http://www.ntelos.com/network

I drove through Waynesboro and Staunton last weekend and had 3G service, so I'm assuming they haven't opened it up to Sprint users yet. I'm heading that way again next weekend so I'll see if anything changes by then.

 

Sent from my Note 4.

Link to comment
Share on other sites

I drove through Waynesboro and Staunton last weekend and had 3G service, so I'm assuming they haven't opened it up to Sprint users yet. I'm heading that way again next weekend so I'll see if anything changes by then.

 

Sent from my Note 4.

No it thought it was ironic that they say they have LTE in Richmond when it really sprint Network in Richmond. That the part of the list I chuckled at.

Link to comment
Share on other sites

No it thought it was ironic that they say they have LTE in Richmond when it really sprint Network in Richmond. That the part of the list I chuckled at.

Yeah, same with most of the Shenandoah Valley towns and cities they listed, which are in the Shentel market. It seems to not be fair that ntelos customers can use Sprint's network but ntelos doesn't allow the reverse.

 

Sent from my Note 4.

Link to comment
Share on other sites

Charlottesville is definitely Central VA, and its not listed (yet?!). In fact, I don't see "Central VA" even on that page. It's really the Richmond area, Hampton Roads, and the Shenandoah Valley (which extends east only as far as Waynesboro).

 

Charlottesville is definitely Central VA, and its not listed (yet?!). In fact, I don't see "Central VA" even on that page. It's really the Richmond area, Hampton Roads, and the Shenandoah Valley (which extends east only as far as Waynesboro).

except that part of west central Va belongs to Ntelos. Drive over to Gordansville exit off 64 west and you are on Sprint turf. 

Link to comment
Share on other sites

Yeah, same with most of the Shenandoah Valley towns and cities they listed, which are in the Shentel market. It seems to not be fair that ntelos customers can use Sprint's network but ntelos doesn't allow the reverse.

 

Sent from my Note 4.

yeah, exactly. I went out to Massanutten but I had to drive through Ntelos territory and it was brutal

Link to comment
Share on other sites

Yeah, same with most of the Shenandoah Valley towns and cities they listed, which are in the Shentel market. It seems to not be fair that ntelos customers can use Sprint's network but ntelos doesn't allow the reverse.

 

Sent from my Note 4.

I should probably clarify this to say LTE. Obviously ntelos allows the use of their 3G network to Sprint's customers.

 

Sent from my Note 4.

Link to comment
Share on other sites

  • 2 weeks later...

In Richmond we are getting lte in areas. My question is when they decide to flip the switch will we see a stronger signal?

 

 

Sprint doesn't "flip a switch" to light up a market like other providers have done. Individual towers come online as they are ready.

 

Sent from my Note 4.

 

True, but they do come back to tune the towers later. So power output, transmitter directions, adding more carriers, etc. is all done after tower is up and running. Could be months afterward. 

Link to comment
Share on other sites

  • 2 weeks later...

So the water tower next to the old Clover Hill High School started broadcasting LTE this week. You can now get a LTE signal from past woodlake most of the way into Richmond along 360. Don't know when it'll pop up on Robert's updates list but it should be soon. 

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

So I'm back living in this area after staying in Atlanta for 6 months I see that the network has improved in the Brandermill/New Clover Hill High area. So I just got upgraded to the Electric Blue s5 and it's Spark enabled every Couple of hours I'll connect to 15 mins worth of Spark on band 41 aka TDD LTE it's not the best indoors but great on the porch. I'm still not sure why my phone hasn't Picked up standard 1900 LTE but on 41 i have maxed to 5.25 down & 1.30 up with about 2 Bars. What's the average is with band 41? Now 3G has also greatly improved from 6 months ago however i am also receiving abnormal data speeds like the fastest 3g speed i have is 1.46 Down & .81 up. Remember I'm not complaining 3G is nice but i have a speedtest I can't understand having 4 bars getting 1.56 down and 0.00 up??? Is there some testing going on with 3G or what it's 2am the 3G network should be at godspeed. Not complaining just curious about the tower on genito.

Edited by Raheim_M4
Link to comment
Share on other sites

How has spark speeds been in your area in Richmond or Counties

Extremely weird in normal mode my phone finds Band 41, and 3G. However My phone refuses to connect to Band 25 when operating in normal mode meanwhile my moms Note 3 has no time finding that signal and It can actually sit on band 25 longer than me on band 41 my phone bounces between the two signals and I always get 1 bar of TDDLTE even when on the property of the tower on Genito.
Link to comment
Share on other sites

How has spark speeds been in your area in Richmond or Counties

 

Consistently fast in Henrico and downtown Richmond. I personally can't believe it myself but I've also been consistently getting speeds in the 150+ Mbps during peak hours in areas with spark (pretty much everywhere in Henrico and Richmond that I travel to). 

2015-02-25 17.50.17.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...