Jump to content

Sprint Carrier Update Hack (for iPhone 5 Only)


kory108

Recommended Posts

Over the past month or so there has been hacked/tweaked carrier updates released for all the major carriers in the US. iTweakiOS just released the latest one for Sprint. It supposedly increases 3G (not LTE) speeds. I'll be trying it out when I get home tonight and will report back my results.

 

Note: This will work on iPhone 5's that are not jailbroken!

 

http://www.itweakios.com/apps/blog/show/27511053-sprint-carrier-update-hack-iphone-5-only-

 

 

 

This hack enables 1x Advanced and EVDO Rev. B on the iPhone 5 enhancing EVDO 3G data speeds. Though Sprint is limited to EVDO Rev. A, the device itself becomes more open to an increased amount of bandwidth thus allowing for better throughput of data and data connection. Already intact coding within the carrier files also showed signs that Sprint has 1x Advanced support on their network. So, how knows? This may actually enable something new. Throttling code was put in place to limit users to a certain amount of bandwidth on 3G only as well and has now been removed. As for LTE, no throttling codes were put in place to limit users' bandwidth nor was any band preference coding put into place to limit users on coverage. This won't increase signal so don't expect it to like the AT&T version of this hack nor does it increase LTE as it was not limited in the first place.

 

 

  • Like 1
Link to comment
Share on other sites

Over the past month or so there has been hacked/tweaked carrier updates released for all the major carriers in the US. iTweakiOS just released the latest one for Sprint. It supposedly increases 3G (not LTE) speeds. I'll be trying it out when I get home tonight and will report back my results.

 

Note: This will work on iPhone 5's that are not jailbroken!

 

http://www.itweakios.com/apps/blog/show/27511053-sprint-carrier-update-hack-iphone-5-only-

i don't understand how it works but i will try it.

 

Also i will do speed tests pre and post (i will make it a sample).  I will average the speed tests and see if hack worked.

  • Like 2
Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

This isn't a PRL. It is a carrier update file which is what allows for some low level customization of the phone (such as FaceTime over cellular, hotspot functionality, and things like that).

 

 

Sent from my iPhone 5 using Tapatalk

Link to comment
Share on other sites

I just applied this to my iPhone cant test at my house as i have LTE in my area (South St. Louis/ Tower Grove Area) but i'll post updates tomorrow! I work at sprint in Ofallon and 3G data speeds out there are terrible as of the past couple months so im hoping this helps!

Edited by cognitivel0gic
Link to comment
Share on other sites

I never believe these fixes as there isn't a problem with the device being limited if it can max out the Evdo airlink or LTE without mods. The problem is due to having to share the airwaves with all the folks running speedtests.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

Can someone post a speedtest , I want to see if this is worth me doing .

 

I can bet you it's a big fat negative...placebo affect.  Plus what's a speedtest going to tell you with all the variables in place?  You'd have to do this in a controlled environment.

Link to comment
Share on other sites

I can bet you it's a big fat negative...placebo affect. Plus what's a speedtest going to tell you with all the variables in place? You'd have to do this in a controlled environment.

..... Anyways back to what I had asked before.

Edited by IsaiahL
Link to comment
Share on other sites

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

Link to comment
Share on other sites

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

 

1xA should already be enabled.  Or maybe that's why the iPhone is shunned from using 800SMR first like all the other phones.  The funny part is 1xA is going to absolutely zero for your speeds.

Link to comment
Share on other sites

 

 

So, it enables Evdo Rev B, which will do nothing for Sprint. It enables 1XA, which does nothing currently.

 

So the tweak does nothing?

 

 

1xA should already be enabled. Or maybe that's why the iPhone is shunned from using 800SMR first like all the other phones. The funny part is 1xA is going to absolutely zero for your speeds.

I've heard conflicting reports as to whether or not the 800 MHz signal I'm connecting to is 1xA.

 

Either way, my point stands. If it's not enabled, this tweak does nothing. If it is, it still does nothing without an appropriate signal to connect to, as you mentioned before about the iPhone 5 lacking SMR in its PRL.

 

Sent from my SCH-l900 using Tapatalk 2

 

 

Link to comment
Share on other sites

Either way, my point stands. If it's not enabled, this tweak does nothing. If it is, it still does nothing without an appropriate signal to connect to, as you mentioned before about the iPhone 5 lacking SMR in its PRL.

 

Sent from my SCH-l900 using Tapatalk 2

 

Not lacking.  It finally has the ability to use 800SMR but someone at Sprint decided they didn't want the iPhones sitting on the 800SMR channels like other phones.  So the iPhones only use the 800SMR if there is no PCS signal at all.

  • Like 1
Link to comment
Share on other sites

Can someone post a speedtest , I want to see if this is worth me doing .

No hack can speed up Sprint's 3G. 3200kbps is the full on theoretical max data rate over the channel. 

Hope that answers your question. 

Link to comment
Share on other sites

No hack can speed up Sprint's 3G. 3200kbps is the full on theoretical max data rate over the channel.

Hope that answers your question.

Thanks that pretty much answers it .

Link to comment
Share on other sites

What I want to know is whether this is a signed profile or he just found a way to install an unsigned one, because this is just a compressed bundle and it contains the PRL, etc. If this works unsigned, then it means we can change the PRL without jailbreaking.

 

This isn't a PRL. It is a carrier update file which is what allows for some low level customization of the phone (such as FaceTime over cellular, hotspot functionality, and things like that).

 

Sent from my iPhone 5 using Tapatalk

 

How many times do I have to tell people, I'm an iOS developer. The file is in fact an OS X compressed bundle, which you can open to find carrier.prl among other files. Normally, the phone will only accept the bundle if signed by Apple, ensuring none of the files are corrupt or tampered with. This "hack" simply appears to use a debug loading mechanism to bypass that check, so in theory we can modify the PRL. I will try it later and report back.

  • Like 1
Link to comment
Share on other sites

I never believe these fixes as there isn't a problem with the device being limited if it can max out the Evdo airlink or LTE without mods. The problem is due to having to share the airwaves with all the folks running speedtests.

 

Sent from my little Note2

 

What about this?

 

"The hack is said to enable Release 9 DC-HSPA+ on the iPhone 5, opening the device to an increased amount of bandwidth for better throughput of data even though T-Mobile has not upgraded its network to support Release 9. The coders claim their hack bumps up HSPA+ speeds by 3 Mbps to 8 Mbps on the downlink. According to Brown, T-Mobile's HSPA+ network is capable of Release 8 downlink speed of 42 Mbps and Release 6 speed of 5.76 Mbps on the uplink."

 

Read more: T-Mobile iPhone 5 users get faster HSPA+ speeds via hacked software - FierceBroadbandWireless http://www.fiercebroadbandwireless.com/story/t-mobile-iphone-5-users-get-faster-hspa-speeds-hacked-software/2013-05-13#ixzz2VRpFcos1 

Subscribe at FierceBroadbandWireless

Link to comment
Share on other sites

How many times do I have to tell people, I'm an iOS developer. The file is in fact an OS X compressed bundle, which you can open to find carrier.prl among other files. Normally, the phone will only accept the bundle if signed by Apple, ensuring none of the files are corrupt or tampered with. This "hack" simply appears to use a debug loading mechanism to bypass that check, so in theory we can modify the PRL. I will try it later and report back.

 

So what's your findings good buddy?

  • Like 1
Link to comment
Share on other sites

What about this?

 

They are likely seeing higher speeds not because of any upgrade but because their hack puts them on the less burdened PCS W-CDMA carrier(s) instead of the long standing AWS W-CDMA carrier(s).

 

Correlation ≠ causation.

 

AJ

Link to comment
Share on other sites

 

 

What about this?

 

 

They are likely seeing higher speeds not because of any upgrade but because their hack puts them on the less burdened PCS W-CDMA carrier(s) instead of the long standing AWS W-CDMA carrier(s).

 

Correlation ≠ causation.

 

AJ

Shouldn't TMO's network automatically do this?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • I've now seen how things work in Kobe, Hiroshima, and Osaka, as well as some areas south of Osaka (e.g. Wakayama, Kinokawa), and tried three more SIMs. The two physical SIMs (different branding for each) both use IIJ, which provides a Japanese IP address/routing on NTT, aleit LTE-only, so latency is ~45ms to Tokyo. The catch with NTT is that it uses two frequency bands (B42/3500 MHz LTE, n79/4900 MHz NR) that you're not going to get on an Android sold in the US, and I'm guessing that B42 would be helpful speed-wise on that network, as it doesn't have B41. I also found one place that doesn't have cell service: a vending machine in the back of the Osaka Castle tower. Or, rather, the B8/18/19 signal is weak enough there to be unusable. Going back to 5G for a moment, I saw a fair amount of Softbank n257 in Hiroshima, as well as in some train stations between Osaka and Kobe. 4x100 MHz bandwidth, anchored by B1/3/8, with speeds sometimes exceeding 400 Mbps on the US Mobile roaming eSIM. Not quite the speeds I've seen on mmW in the States, but I've probably been on mmW for more time over the past few days than I have in the US over the past year, so I'll take it. My fastest speed test was actually on SoftBank n77 though, with 100 MHz of that plus 10x10 B8 hitting ~700 Mbps down and ~80 Mbps up with ~100ms latency...on the roaming eSIM...on the 4th floor of the hotel near Shin-Kobe station. Guessing B8 was a DAS or small cell based on signal levels, and the n77 might have been (or was just a less-used sector of the site serving the train station). I'm now 99% sure that all three providers are running DSS on band 28, and I've seen 10x10 on similar frequencies from both NTT and SoftBank IIRC, on both LTE and 5G. I also picked up one more eSIM: my1010, which is different from 1010/csl used by US Mobile's eSIM unfortunately, as it's LTE-only. On the bright side, it's cheap (10GB/7 days is like $11, and 20GB for the same period would be around $15), and can use both KDDI and SoftBank LTE. It also egresses from Taiwan (Chunghwa Telecom), though latency isn't really any better than the Singapore based eSIMs. Tomorrow will include the most rural part of our journey, so we'll see how networks hold up there, and from tomorrow night on we'll be in Tokyo, so any further reports after that will be Tokyo-centric.
    • I think the push for them is adding US Mobile as a MVNO with a priority data plan.  Ultimately, making people more aware of priority would allow them (and other carriers) to differentiate themselves from MVNOs like Consumer Cellular that advertise the same coverage. n77 has dramatically reduced the need for priority service at Verizon where the mere functioning of your phone was in jeopardy a couple of years ago if you had a low priority plan like Red Pocket. Only have heard of problems with T-Mobile in parts of Los Angeles. AT&T fell in between. All had issues at large concerts and festivals, or sporting events if your carrier has no on-site rights. Edit: Dishes native 5g network has different issues: not enough sites, limited bandwidth. Higher priority would help a few. Truth is they can push phones to AT&T or T-Mobile.
    • Tracfone AT&T sims went from QCI 8 to 9 as well a couple years ago. I'm pretty neutral towards AT&T's turbo feature here, the only bad taste left was for those who had unadvertised QCI 7 a couple months ago moved down to 8. In my eyes it would have been a lot better for AT&T to include turbo in those Premium/Elite plans for free to keep them at QCI 7, while also introducing this turbo add on option for any other plans or devices. As it stands now only a handful of plans can add it, and only if you're using a device on a random list of devices AT&T considers to be 5G smartphones.
    • My Red Pocket AT&T GSMA account was dropped to QCI 9 about a year ago.  Most recently 8 for the last few years prior.  Voice remains at 5.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...