Jump to content

Hard Drive Info


centermedic

Recommended Posts

you can look at the drive itself.  should say on the sticker what it is.  SATA is 1.5 GB/s, SATA2 is 3 GB/s and SATA3 is 6.

I was hoping to avoid that. Computer is still in use and i will likely order a drive so my down time is minimal.

Link to comment
Share on other sites

Try going to device manager...assuming you're running Windows. Under disk drives it should have some sort of model number listed...look up the model and you should be good to go.

 

SATA should be backwards compatible...the only hang up might be large drives.

Link to comment
Share on other sites

I was hoping to avoid that. Computer is still in use and i will likely order a drive so my down time is minimal.

Approx, how old is the PC? Which version of windows? Is this a box machine (Dell, HP, Gateway, etc) if so there should a pc model number.

Link to comment
Share on other sites

If it is a primary drive (boot) and it is going bad, having it running can be making matters worse and your chances of data loss gets greater with each passing minute.  I trust you have backed up what you want just in case?  Is this a windows drive?  what are you using, chkdsk?  this can sometimes take a very long time (hours)..to the point where it looks like it is frozen but it really isnt.

Link to comment
Share on other sites

If it is a primary drive (boot) and it is going bad, having it running can be making matters worse and your chances of data loss gets greater with each passing minute.  I trust you have backed up what you want just in case?  Is this a windows drive?  what are you using, chkdsk?  this can sometimes take a very long time (hours)..to the point where it looks like it is frozen but it really isnt.

Boot disk is made and everything is backed up on an external drive. Chkdisk ran for 12 hours and it was self initiated. Probably had a brown out and computer restarted.

Approx, how old is the PC? Which version of windows? Is this a box machine (Dell, HP, Gateway, etc) if so there should a pc model number.

Its about three years old. It is an HP p6714y

Try going to device manager...assuming you're running Windows. Under disk drives it should have some sort of model number listed...look up the model and you should be good to go.

 

SATA should be backwards compatible...the only hang up might be large drives.

My hard drives are listed as generic...go figure. Can I connect a sata three hd to a sata interface?

Link to comment
Share on other sites

Boot disk is made and everything is backed up on an external drive. Chkdisk ran for 12 hours and it was self initiated. Probably had a brown out and computer restarted.

Its about three years old. It is an HP p6714y

My hard drives are listed as generic...go figure. Can I connect a sata three hd to a sata interface?

Yep, not an issue. It'll just transfer data slower. Unless you have an SSD, it's not really an issue.

 

Try device manager, then the ide/atapi controller section. Although it might list an IDE controller still, around 3 years ago you'd still most likely have an sata drive.

  • Like 1
Link to comment
Share on other sites

Apparently my hard drive is about to crash. Disk check hangs up. Anyhow, does anybody know how I can look up my interface ie: sata, sata2 etc etc? Thanks.

Here is the link to the Specs of you PC http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5035348&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02675196-21%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

 

It is a 1TB Sata3 7200 rpm hard drive. Here is one that I have about 30 of in my office and never have had an issue.

 

http://www.newegg.com/Product/Product.aspx?Item=9SIA2W00ZD1577

Link to comment
Share on other sites

It makes me sad that I paid less for mine 3-4 years ago.  I had to switch to Seagates vs paying over 2x as much for the newer blacks. 

Link to comment
Share on other sites

It makes me sad that I paid less for mine 3-4 years ago.  I had to switch to Seagates vs paying over 2x as much for the newer blacks. 

 

 

I have used the Seagates on some clients that did not want to put a lot of money into a machine and these are still going also.  I would just really stay away for the WD green drives they are horrible. I have replaced everyone I purchased.

Link to comment
Share on other sites

Link to comment
Share on other sites

Mainboard shows an IDE connection and four sata connections.  Could have just looked up the HD in device manager.

I checked. The info was not listed. All i got was standard disk drive.

Link to comment
Share on other sites

Excellent. Thanks for the help guys. I was considering either a WD Black or a Seagate Barracuda.

 

I've never had a problem with either, and have about 4 of each.  However, some of the Barracudas have a head-parking issue that I have yet to find a definitive fix for.  It basically stops the drive after a short period of non-use, which makes a really annoying sound.  Supposedly it should also put extra wear on the drive, but is done for energy saving.  :td:

 

If this is your boot drive, you should consider upgrading to a SSD.  It's the single biggest performance enhancement you can make to your system, and assuming you have a second drive for mass storage, they are quite affordable in 128GB and 256GB sizes.

  • Like 3
Link to comment
Share on other sites

Also, if it's your system drive don't forget to backup your application data before the drive dies.  It's easy to forget, but backing up your email, bookmarks, and any other program-specific profiles/settings is always a good idea. 

 

As long as we're on the subject, can anyone recommend software to repair a drive with corrupt headers?  It has to have the ability to repair an actual mounted drive/partition as opposed to the physical disk itself, since the drive is encrypted.  I can successfully mount it (decrypt) since I restored the encryption headers, but the beginning of the data is trashed, including the folder structure.  The software Get Data Back NTFS did a good job at reading most everything, but I didn't know if there were other (cheaper) options. 

 

Windows likes to occasionally initialize encrypted volumes without asking permission. :mad:

Link to comment
Share on other sites

I've never had a problem with either, and have about 4 of each.  However, some of the Barracudas have a head-parking issue that I have yet to find a definitive fix for.  It basically stops the drive after a short period of non-use, which makes a really annoying sound.  Supposedly it should also put extra wear on the drive, but is done for energy saving.  :td:

 

If this is your boot drive, you should consider upgrading to a SSD.  It's the single biggest performance enhancement you can make to your system, and assuming you have a second drive for mass storage, they are quite affordable in 128GB and 256GB sizes.

Great idea. I had no idea that the SSD prices had come down so much. I have a second installed drive that is 250 gb and the 1 tb external drive. I should be ok with a 128 gb SSD.

Link to comment
Share on other sites

If the drive is still working, I would try a drive to drive image. Very easy to do and you won't forget to back anything up.

 

I prefer reinstalling.  I used to do it every couple months (so I didn't have to buy a Windows license!) but have been busy with 2 jobs & don't have any days off to do it anymore.  Reinstalling from a clean install eliminates any viruses/malware/bloat that you've developed on your drive.  I have a printout of everything to backup before the wipe and the order everything has to be reinstalled, as well as a usb stick with all the needed applications and drivers so it only takes a few hours to do everything.  This is immensely easier when you have a separate system drive and store all permanent files on other physical disks. 

 

For most people, cloning the drive is easier, but I don't like the drawbacks.  I do very occasionally save an image of my boot drive for backup-backup reasons (in case I totally forget a new app has profiles or settings to backup or something like that), but have never used one. 

 

EDIT: Also wow I forgot SSDs went back up in price.  The drive I bought 18 months ago is going for 150% of what I paid, and that's for the refurbished version!  Still ~$90 for a SSD is not bad, and 128GB is plenty if you only store OS, applications, and a couple games on the drive. 

Link to comment
Share on other sites

I prefer reinstalling.  I used to do it every couple months (so I didn't have to buy a Windows license!) but have been busy with 2 jobs & don't have any days off to do it anymore.  Reinstalling from a clean install eliminates any viruses/malware/bloat that you've developed on your drive.  I have a printout of everything to backup before the wipe and the order everything has to be reinstalled, as well as a usb stick with all the needed applications and drivers so it only takes a few hours to do everything.  This is immensely easier when you have a separate system drive and store all permanent files on other physical disks. 

 

For most people, cloning the drive is easier, but I don't like the drawbacks.  I do very occasionally save an image of my boot drive for backup-backup reasons (in case I totally forget a new app has profiles or settings to backup or something like that), but have never used one. 

 

EDIT: Also wow I forgot SSDs went back up in price.  The drive I bought 18 months ago is going for 150% of what I paid, and that's for the refurbished version!  Still ~$90 for a SSD is not bad, and 128GB is plenty if you only store OS, applications, and a couple games on the drive. 

I agree, a fresh install is nice. Except I would never spend a few hours. I would create a syspreped image and apply from that. It would take approx 30-45 minutes for a Windows 7 image to be applied and all your apps are already installed.

 

Talking about viruses, how often do you get them. I manage over 18,000 pc in 3 different countries and we get maybe 3 or 4 viruses a year.

 

Also not purchasing windows you can use the trial then from command line run "slmgr -rearm" and that resets it for another same length trial and you can run that command 3 times I believe on Windows 7.

Link to comment
Share on other sites

I agree, a fresh install is nice. Except I would never spend a few hours. I would create a syspreped image and apply from that. It would take approx 30-45 minutes for a Windows 7 image to be applied and all your apps are already installed.

 

Talking about viruses, how often do you get them. I manage over 18,000 pc in 3 different countries and we get maybe 3 or 4 viruses a year.

 

Also not purchasing windows you can use the trial then from command line run "slmgr -rearm" and that resets it for another same length trial and you can run that command 3 times I believe on Windows 7.

 

Even with today's SSD's cutting down the install time to 10 minutes or so for Windows I still prefer this exact method.  Any PC, laptop, that I have purchased always gets fresh install of Windows to wipe off the OEM garbage.  Once I have the base OS drivers and such installed, the PC gets imaged for a restore later.  Makes things so much easier when you want to blow out the OS and start over.

Link to comment
Share on other sites

Even with today's SSD's cutting down the install time to 10 minutes or so for Windows I still prefer this exact method.  Any PC, laptop, that I have purchased always gets fresh install of Windows to wipe off the OEM garbage.  Once I have the base OS drivers and such installed, the PC gets imaged for a restore later.  Makes things so much easier when you want to blow out the OS and start over.

Agreed, I stopped buying boxed PC's because of the bloatware, But on a laptop you have no choice except to blow it away and start fresh.

  • Like 1
Link to comment
Share on other sites

Go to a Microsoft store and get one of the select models which covers every price point in laptops, and you will find no bloatware even online.

I will believe it when I see it. I would wipe it anyways so I know what was installed on it and what wasn't.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...