Jump to content

Network Woes & Fixes


Recommended Posts

As people complain about network issues and how terrible the data speeds are there seems to a problem found and solution in the works.

 

It basically seems to be growing pains. As a cell hits 70% capacity it is supposed to automatically request more. Well there seems to have been a software glitch that prohibited towers from doing this nationwide. While NV is the long-term solution, Sprint is working on a near-term fix that is supposed to be finished by the end of July. This all comes from a Sprint corporate employee who was at a meeting with a network engineer and said this was common knowledge.

Link to comment
Share on other sites

Yea they mentioned that here on this site. I think it is in the NV explained sticky (could be wrong). IIRC, Sprint is going to install some more t1 lines on the towers until they can get to it with NV upgrades.

Link to comment
Share on other sites

I'm OK with this thread in general. However, this topic could be rife for trolls to come out of the woodwork. We have a low tolerance for unconstructively negative and/or bashing threads. Please keep the posts as factual and constructive, like it's going so far. Thanks.

 

Robert

 

NOTE: This is more a warning for people who may come along, not for the posts already in the thread above.

  • Like 12
Link to comment
Share on other sites

Wow I was not aware of this fact on the legacy towers. I am curious what the fix will be because even band aid fixes are better than nothing until Network Vision hits that market. I wonder how long have they known about this problem.

Link to comment
Share on other sites

Yea they mentioned that here on this site. I think it is in the NV explained sticky (could be wrong). IIRC, Sprint is going to install some more t1 lines on the towers until they can get to it with NV upgrades.

 

I looked on the NV explained sticky and didn't see it. I'm definitely curious to know more about the issue.

 

Wow I was not aware of this fact on the legacy towers. I am curious what the fix will be because even band aid fixes are better than nothing until Network Vision hits that market. I wonder how long have they known about this problem.

 

Yeah, same questions here. Would love to know more about the issue and fixes.

 

Anyone?

Link to comment
Share on other sites

I for one would love to have more information on this issue. Would really make me feel better to know it was a network/ software problem that allowed the network to degrade and not just a "don't care" problem on sprints end.

 

Would also leave room for more hope that band-aid fixes might be a good, working short term solution until NV roolouts reach these areas.

Link to comment
Share on other sites

T1 lines... Do you guys mean the old 1.5mbps T-1 infrastructure? All it takes is one person streaming netflix and the entire T-1 is exhausted, how does this work in application? Or are we talking multiple T1's being bundled?

Link to comment
Share on other sites

T1 lines... Do you guys mean the old 1.5mbps T-1 infrastructure? All it takes is one person streaming netflix and the entire T-1 is exhausted, how does this work in application? Or are we talking multiple T1's being bundled?

 

You would be surprised what a T1 can feed. You also have to remember that the highest data rate of one sector channel is around 3 megabits. And that's at a perfect connection. Real world is much less than that.

Link to comment
Share on other sites

The answer is T1's. And a lot of them. In my overall market which has been heavily neglected they are installing 230 T1's to cover them. So if they're doing that much or more for any of the others that aren't in the immediate NV future we should all start seeing much better speeds soon.

Link to comment
Share on other sites

The answer is T1's. And a lot of them. In my overall market which has been heavily neglected they are installing 230 T1's to cover them. So if they're doing that much or more for any of the others that aren't in the immediate NV future we should all start seeing much better speeds soon.

 

The problem with the temporary T1 fixes, from what I have seen, is this:

 

Site has insufficient backhaul for data demands in the cell and throughput speeds start dropping. As speeds start dropping, usage also starts to go down. As speeds start to drop below 100kbps, all streaming activity stops. Users actually modify their behavior and stop using data so much because the experience is so poor. However, they keep using it enough that the experience remains poor and does not improve.

 

When this occurs, Sprint's network manager (Ericsson) orders additional T1 lines for the site. Usually one or two more. It takes between 3 months and one year for them to get set at the site and punched down for use. Yes, that's right. Sometimes it takes a full year! Once the T1's are punched down, Ericsson comes back out and connects the new T1 lines (and sometimes adds carriers too).

 

Once the additional T1 backhaul is live, speeds shoot right up. 0.9Mbps to 1.4Mbps, on average. Sprint customers start to notice something is different within a few days. People start running speed tests. People start opening their minds to the possibilities of using their 3G data again at the site. People start using their Pandora again. People start streaming Netflix again. And within a few weeks, or a few months, the site is back down in the dumps again. I have seen this pattern happen over and over again. Better performance = more usage, in an unlimited usage network.

 

However, not all of these speed upgrades being implemented are T1. Some are AAV. On those sites that are getting 2Mbps+ EVDO speeds, the backhaul in those places is AAV and not T1. These sites seem to be much less affected a few weeks and months down the road. Even though T1's are 'right-sized' for EVDO carrier backhaul, modern usage at dense cells just don't provide the performance needed. For Sprint to add more than one or two additional T1's is cost prohibitive. T1's are expensive creatures.

 

The answer, of course, is enhanced backhaul. Like what's being offered in Network Vision. Almost all sites will be going to Microwave or AAV backhaul. Much more scalable ethernet based backhaul solutions. Sprint is getting closer and closer every day to abandoning their old archaic (and expensive) T1 backed backhaul. And I say good riddance!

 

Robert

  • Like 4
Link to comment
Share on other sites

The problem with the temporary T1 fixes, from what I have seen, is this:

 

Site has insufficient backhaul for data demands in the cell and throughput speeds start dropping. As speeds start dropping, usage also starts to go down. As speeds start to drop below 100kbps, all streaming activity stops. Users actually modify their behavior and stop using data so much because the experience is so poor. However, they keep using it enough that the experience remains poor and does not improve.

 

When this occurs, Sprint's network manager (Ericsson) orders additional T1 lines for the site. Usually one or two more. It takes between 3 months and one year for them to get set at the site and punched down for use. Yes, that's right. Sometimes it takes a full year! Once the T1's are punched down, Ericsson comes back out and connects the new T1 lines (and sometimes adds carriers too).

 

Once the additional T1 backhaul is live, speeds shoot right up. 0.9Mbps to 1.4Mbps, on average. Sprint customers start to notice something is different within a few days. People start running speed tests. People start opening their minds to the possibilities of using their 3G data again at the site. People start using their Pandora again. People start streaming Netflix again. And within a few weeks, or a few months, the site is back down in the dumps again. I have seen this pattern happen over and over again. Better performance = more usage, in an unlimited usage network.

 

However, not all of these speed upgrades being implemented are T1. Some are AAV. On those sites that are getting 2Mbps+ EVDO speeds, the backhaul in those places is AAV and not T1. These sites seem to be much less affected a few weeks and months down the road. Even though T1's are 'right-sized' for EVDO carrier backhaul, modern usage at dense cells just don't provide the performance needed. For Sprint to add more than one or two additional T1's is cost prohibitive. T1's are expensive creatures.

 

The answer, of course, is enhanced backhaul. Like what's being offered in Network Vision. Almost all sites will be going to Microwave or AAV backhaul. Much more scalable ethernet based backhaul solutions. Sprint is getting closer and closer every day to abandoning their old archaic (and expensive) T1 backed backhaul. And I say good riddance!

 

Robert

 

Wow! A year lead time for a T1 is incredibly long. I call shenanigans and think that the local carriers are playing games. I certainly wouldn't put it past Verizon and AT&T to slow down the process to hamper a competitor. We install T1s all across the country and start kicking and screaming if the install interval passes 60 days. We're normally in the neighborhood of 30-45. The new backhaul will definitely alleviate the issues by cutting the ILECs completely out of the picture and making a more cost effective network. In my experience, the tipping point with T1s is generally 4. Once you need the 5th, it's time to look at other solutions such as fiber or microwave.

Link to comment
Share on other sites

 

 

The problem with the temporary T1 fixes, from what I have seen, is this:

 

Site has insufficient backhaul for data demands in the cell and throughput speeds start dropping. As speeds start dropping, usage also starts to go down. As speeds start to drop below 100kbps, all streaming activity stops. Users actually modify their behavior and stop using data so much because the experience is so poor. However, they keep using it enough that the experience remains poor and does not improve.

 

When this occurs, Sprint's network manager (Ericsson) orders additional T1 lines for the site. Usually one or two more. It takes between 3 months and one year for them to get set at the site and punched down for use. Yes, that's right. Sometimes it takes a full year! Once the T1's are punched down, Ericsson comes back out and connects the new T1 lines (and sometimes adds carriers too).

 

Once the additional T1 backhaul is live, speeds shoot right up. 0.9Mbps to 1.4Mbps, on average. Sprint customers start to notice something is different within a few days. People start running speed tests. People start opening their minds to the possibilities of using their 3G data again at the site. People start using their Pandora again. People start streaming Netflix again. And within a few weeks, or a few months, the site is back down in the dumps again. I have seen this pattern happen over and over again. Better performance = more usage, in an unlimited usage network.

 

However, not all of these speed upgrades being implemented are T1. Some are AAV. On those sites that are getting 2Mbps+ EVDO speeds, the backhaul in those places is AAV and not T1. These sites seem to be much less affected a few weeks and months down the road. Even though T1's are 'right-sized' for EVDO carrier backhaul, modern usage at dense cells just don't provide the performance needed. For Sprint to add more than one or two additional T1's is cost prohibitive. T1's are expensive creatures.

 

The answer, of course, is enhanced backhaul. Like what's being offered in Network Vision. Almost all sites will be going to Microwave or AAV backhaul. Much more scalable ethernet based backhaul solutions. Sprint is getting closer and closer every day to abandoning their old archaic (and expensive) T1 backed backhaul. And I say good riddance!

 

Robert

 

I wish you'd explain this to my Ericsson area network manager. This is exactly what's been happening in our market. I'm sure not all of the blame can be placed on Ericsson, though. It's reactive upgrading and not proactive like NV.

Link to comment
Share on other sites

Wow! A year lead time for a T1 is incredibly long. I call shenanigans and think that the local carriers are playing games. I certainly wouldn't put it past Verizon and AT&T to slow down the process to hamper a competitor. We install T1s all across the country and start kicking and screaming if the install interval passes 60 days. We're normally in the neighborhood of 30-45. The new backhaul will definitely alleviate the issues by cutting the ILECs completely out of the picture and making a more cost effective network. In my experience, the tipping point with T1s is generally 4. Once you need the 5th, it's time to look at other solutions such as fiber or microwave.

 

You know...the one area where I saw the one year lead time was CenturyLink in the Central Illinois market!!!

 

Robert

Link to comment
Share on other sites

I wish you'd explain this to my Ericsson area network manager. This is exactly what's been happening in our market. I'm sure not all of the blame can be placed on Ericsson, though. It's reactive upgrading and not proactive like NV.

 

The Ericsson contract wouldn't give them the ability to upgrade T1 service to AAV for Sprint on their own, just based on performance. Ericsson can make the recommendation to Sprint and prepare a change order request to do the work. But most likely Sprint would reject that since Network Vision work is forthcoming.

 

Robert

Link to comment
Share on other sites

AAV is industry code for cable operator provided backhaul' date=' correct?[/quote']

 

It can be cable, and often is. It's basically a catch all. AAV (Alternative Access Vendors) typically means all ethernet based backhaul solutions that are not microwave or direct fiber connection. However, even sometimes I have even seen fiber marked AAV when provided from a third party.

 

Robert via NOVO7PALADIN Tablet using Forum Runner

Link to comment
Share on other sites

Migrated from Original Forum. Originally Posted 14 January 2011

 

I have yet to verify this, and I am very skeptical that it is true. But my wife claimed that she was getting 4G WiMax at her work on the outskirts of St. Cloud. I tried to pick it up in several spots, including her work, and couldn't connect to anything. I think she was mistaken, but I'm hoping...

 

I know what grumpy old men would say about it... wish in this hand and crap in the other and see which gets filled first.

 

Unfortunately that's how things are today in many companies.

I like to refer to it as the pizza buffet syndrome. If you barely have any pizzas coming out people are constantly taking what you put up on the line. As soon as you make a ton of pizzas and throw them up on the line, your buffet looks great. But then people see you have a bunch of fresh pizza, the word gets out and they flock to the line. Now your buffet looks the same as it did before. Exactly what happens with the upgrades. I have seen it first hand with one of the worst towers in my area. They keep throwing an upgrade here and an upgrade there but that one little tower just struggles to serve all the people in our downtown area which includes many state offices, capital, and a couple of casinos as well.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...