Jump to content

Is the iPhone 6s/7 the only carrier agnostic phone that Sprint sells?


coorsleftfield

Recommended Posts

Looking for what phone I can order from Sprint, but can eventually take to any of the other 3 big carriers without missing any LTE bands .   I believe the only phones Sprint sells that are truly carrier agnostic is the iPhone but curious if there are any android options.  Last one I knew of was the Nexus 6. 

 

A major thing I do not like about phones such as the Samsung galaxy/note is there are carrier specific versions and historically a Sprint variant always had less resale value than an AT&T or other variant. 

  • Like 1
Link to comment
Share on other sites

Looking for what phone I can order from Sprint, but can eventually take to any of the other 3 big carriers without missing any LTE bands .   I believe the only phones Sprint sells that are truly carrier agnostic is the iPhone but curious if there are any android options.  Last one I knew of was the Nexus 6. 

 

A major thing I do not like about phones such as the Samsung galaxy/note is there are carrier specific versions and historically a Sprint variant always had less resale value than an AT&T or other variant. 

 

There still is the two variants between GSM/CDMA, though from looking at the Apple site for it, the listing seems that the CDMA version has everything the GSM has, plus the CDMA capabilities. Apple and every other smartphone manufacturer really ought to just sell one global version with all of the bands on it that can be used on multiple carriers. Offer a dual-sim is standard, plus it would be neat if the device could be programmed at the device level to take advantage of the dual sim by being dual carrier, sort of like Project Fi, but utilizing the dual sim carrier configuration. While I'm not sure such an idea is technically possible doing this purely on the device side, it would be great if so.

Link to comment
Share on other sites

I would love a dual sim phone that I could activate on both sprint and cricket. Especially if it could be configured to use sprint as primary but fall back to cricket/Att when sprint lte is not available. That would be awesome for my usage.

  • Like 1
Link to comment
Share on other sites

Interesting. I wonder if this works the same for the note 7 once they quit catching fire.

The s7/7e/gn7 are all software locked based on Sim card used to activate it.

 

One hardware module differentiated only by software.

 

Sent from my Nexus 5X

Link to comment
Share on other sites

According to the Unlocking page on Sprint.com (https://www.sprint.com/legal/unlocking_policy.html)

 

HTC One M9

LG G Flex2

LG G4

Galaxy S6

Galaxy S6 Edge

Galaxy S7

Galaxy S7 Edge

 

in addition to all the iPhones since the 5s/5c

Link to comment
Share on other sites

Isn't there also carrier specific firmware on these that would require a reflash to say move it to at&t and have all their features work like wifi calling ?

 

The s7/7e/gn7 are all software locked based on Sim card used to activate it.

One hardware module differentiated only by software.

Sent from my Nexus 5X

Link to comment
Share on other sites

If you're talking about phones you can order from Sprint AND take to any carrier without any network compromises, then your only option is:

* iPhone 6S

* iPhone 7

You will still get "some" compromises with 6S since that model likely doesn't have all the CA modes supported (even on Sprint).

 

If you don't want any network compromises AND are willing to get the phone elsewhere, then your options grow significantly with the following:

* Google Nexus 5X

* Google Nexus 7P

 

Other phones listed in comment #8 will work, but likely won't have access to all LTE bands on all US carriers.

Link to comment
Share on other sites

If you're talking about phones you can order from Sprint AND take to any carrier without any network compromises, then your only option is:

* iPhone 6S

* iPhone 7

You will still get "some" compromises with 6S since that model likely doesn't have all the CA modes supported (even on Sprint).

 

If you don't want any network compromises AND are willing to get the phone elsewhere, then your options grow significantly with the following:

* Google Nexus 5X

* Google Nexus 7P

 

Other phones listed in comment #8 will work, but likely won't have access to all LTE bands on all US carriers.

Also Moto X Pure Edition, and Moto G4/G4 Plus

  • Like 1
Link to comment
Share on other sites

I have no inside knowledge whatsoever but my guess is the CDMA version is using Qualcomm baseband and the non-CDMA version is using Intel baseband. The CDMA version is sold in the US for Sprint, VZ and in China

 

Apple has always had a different SKU for CDMA. Even if the physical hardware were the same anyone who ships CDMA support has to pay an extra royalty to Qualcomm, thus multiple SKUs.

 

At some point soon Sprint needs to drop CDMA as a requirement for new devices.

Link to comment
Share on other sites

I have no inside knowledge whatsoever but my guess is the CDMA version is using Qualcomm baseband and the non-CDMA version is using Intel baseband. The CDMA version is sold in the US for Sprint, VZ and in China

 

Apple has always had a different SKU for CDMA. Even if the physical hardware were the same anyone who ships CDMA support has to pay an extra royalty to Qualcomm, thus multiple SKUs.

 

At some point soon Sprint needs to drop CDMA as a requirement for new devices.

Sprint can't drop CDMA as a requirement until they are ready to shutdown their CDMA voice network.  Every phone call on Sprint (remember they are a phone company) goes through CDMA.  Seeing as the first part of NV was to replace all the CDMA equipment with new stuff, I can't see it getting shutdown in the next 7-10 years.  Sprint's network isn't dense enough to support VoLTE, especially in the non-metro areas and urban sprawl where communities have out grown the network footprint.

Link to comment
Share on other sites

Sprint can't drop CDMA as a requirement until they are ready to shutdown their CDMA voice network. Every phone call on Sprint (remember they are a phone company) goes through CDMA. Seeing as the first part of NV was to replace all the CDMA equipment with new stuff, I can't see it getting shutdown in the next 7-10 years. Sprint's network isn't dense enough to support VoLTE, especially in the non-metro areas and urban sprawl where communities have out grown the network footprint.

It could be - Sprint is making the choice to leave B26 power levels low. With B26, well optimized I have seen it eclipse the range of the CDMA1900 network (once or twice in massachussets). If all B26 sites were optimized this way, Sprint could easily deploy VoLTE.

  • Like 1
Link to comment
Share on other sites

It could be - Sprint is making the choice to leave B26 power levels low. With B26, well optimized I have seen it eclipse the range of the CDMA1900 network (once or twice in massachussets). If all B26 sites were optimized this way, Sprint could easily deploy VoLTE.

There are still many areas that CDMA BC10 far out reaches LTE B26, I'd love to see B26 maxed out, but I fear that the 5x5 carrier would get overloaded much too quickly.

 

Sent from my Nexus 6P using Tapatalk

Link to comment
Share on other sites

There are still many areas that CDMA BC10 far out reaches LTE B26, I'd love to see B26 maxed out, but I fear that the 5x5 carrier would get overloaded much too quickly.

 

Sent from my Nexus 6P using Tapatalk

Well, if they turn B26 up to a high power level and turn on VoLTE, BC1 CDMA can be cut down to 5mhz or less. Then, B25 can be expanded to 10x10, 15x15, or greater and the power levels on B25 can also be increased. I've seen what a AT&T can do with their B2 - there are areas in the suburbs of Seattle where B2 dies when B12/B17 is at -110 or worse. If Sprint turns up their B25 to those power levels, B26 shouldn't be too burdened...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...