Jump to content

dbm difference on 1X and EVDO


dnwk

Recommended Posts

Today I saw on my SignalCheck app, it says my 1X RSSI is -69 while EVDO is -100.

 

How is that possible to have such a huge RSSI difference? Is it possible to connect to different tower for 1X and EVDO?

Link to comment
Share on other sites

Yes.

AJ

  • Like 1
Link to comment
Share on other sites

doesnt that yes only apply to non-triband devices?

 

Watch signal check when you are on EVDO on a Triband.  Shows 1X on a different channel, different connection.  And they can be different sites/sectors.  

 

Robert

Link to comment
Share on other sites

I thought there was supposed to be only 1 transmit/receive path on tri-band devices? ie why we can't have svlte? I must be confusing something.

Link to comment
Share on other sites

Read up on slot cycle index.

 

AJ

Link to comment
Share on other sites

Guys, SVDO, SVLTE, e/CSFB, etc., are irrelevant.  Think back to 2005.  Original EV-DO handsets were single RF path, yet they could camp simultaneously on CDMA1X and EV-DO.  That was the standard for years -- until SVDO became commonplace for a short period of time.

 

AJ

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Good catch! I meant 115932/119932. Edited my original post I've noticed the same thing lately and have just assumed that they're skipping it now because they're finally able to deploy mmWave small cells.
    • At some point over the weekend, T-Mobile bumped the Omaha metro from 100+40 to 100+90 of n41! That's a pretty large increase from what we had just a few weeks ago when we were sitting at 80+40Mhz. Out of curiosity, tested a site on my way to work and pulled 1.4Gpbs. That's the fastest I've ever gotten on T-Mobile! For those that know Omaha, this was on Dodge street in Midtown so not exactly a quiet area!
    • Did you mean a different site? eNB ID 112039 has been around for years. Streetview even has it with C-band back in 2022 - https://www.google.com/maps/@40.7303042,-73.9610924,3a,24.1y,18.03h,109.66t/data=!3m8!1e1!3m6!1s2ossx06yU56AYOzREdcK-g!2e0!5s20220201T000000!6shttps:%2F%2Fstreetviewpixels-pa.googleapis.com%2Fv1%2Fthumbnail%3Fpanoid%3D2ossx06yU56AYOzREdcK-g%26cb_client%3Dmaps_sv.share%26w%3D900%26h%3D600%26yaw%3D18.027734930682684%26pitch%3D-19.664180274382204%26thumbfov%3D90!7i16384!8i8192?coh=205410&entry=ttu Meanwhile, Verizon's eNB 84484 in Fort Greene has been updated to include C-band and CBRS, but not mmWave. I've seen this a few times now on updated Verizon sites where it's just the CBRS antenna on its own, not in a shroud and without mmWave. Odd.
    • Drove out into the country today.  Dish stuck to my phone like glue. At least -120 rsrp. Likely only good for phone calls (should have tested.) It then switched to T-Mobile. Getting back on Dish was another issue. I am used to dragging out coverage so I expected a few miles, but had to drive at least 10 miles towards a Dish site. Airplane mode, which worked for Sprint, did nothing. Rebooting did nothing. Finally got it to change over about 2 miles from the site by manually setting the carrier to Dish then it had great reception. Sprint used to have a 15 minute timeout but I did not have the patience today.  Previously I did a speed test on Dish out in the country at the edge of Dish coverage. My speeds were 2g variety. Dish has really overclocked some of these sites. Seen rssp readings in the 50s. Would have called them boomer sites with Sprint but much  more common with Dish.  
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...