Jump to content

Network Vision/LTE - Louisiana Market (Lake Charles, Lafayette, Alexandria, Beaumont/Port Arthur Texas)


pokefan02

Recommended Posts

And that's almost the max you will see. The 5mhz of spectrum allows for about 37 megabit down.

 

Looking at the LTE signal numbers in the top left of the screen I can see it was taken very very close to the active site. LTE is very dependent on signal strength but usually even in the fringes that 2 or 3 megabit is better than the Evdo speeds.

I got that while sitting at the light (12th/Common). At my house I pull down 5-6mbs.

Link to comment
Share on other sites

I haven't seen anything so far with my S4. I suppose I will with all the recent posts, but so far I got nada @ work on Prien Lake Rd.

 

Download the Sensorly app from the Playstore or go to Sensorly.com, make sure you pick the Sprint LTE map and you'll see all the purple they've mapped out around town. 

Link to comment
Share on other sites

 

 



I haven't seen anything so far with my S4. I suppose I will with all the recent posts, but so far I got nada @ work on Prien Lake Rd.

Drive to the Krogers on 12th Street, if it doesn't connect to LTE in a couple minutes restart your phone. If it still doesn't connect you may need to have your phone checked.
Link to comment
Share on other sites

Download the Sensorly app from the Playstore or go to Sensorly.com, make sure you pick the Sprint LTE map and you'll see all the purple they've mapped out around town.

Drive to the Krogers on 12th Street, if it doesn't connect to LTE in a couple minutes restart your phone. If it still doesn't connect you may need to have your phone checked.

I have Sensorly. Just looked and it's all north of me. Very good! Thanks!

 

Sent from my SPH-L720 using Tapatalk 4

 

 

Link to comment
Share on other sites

I went out and about this morning and did a little mapping. This is so exciting watching the network expand.

 

Sent from my SPH-L720 using Tapatalk 4

Unfortunately there's not much mapping left to be done until we get more sites fired up. Although...filling in the gaps is still kinda fun. :P

Link to comment
Share on other sites

Unfortunately there's not much mapping left to be done until we get more sites fired up. Although...filling in the gaps is still kinda fun. :P

 

Then the fun part begins...  all the low signals near a new site will take many passes to get them up as Sensorly averages the signal reports.  Some of them were mapped low so many times that I swear I've probably passed like 20-30 times and the color hasn't budged much even when the signal is high.  I end up just driving on another road nearby that isn't mapped so I can map some deep purple on the map to show the site is on. 

 

For example:

 

Look at this one:  http://www.sensorly.com/map/4G/US/USA/Sprint/lte_310sprint#q=30.42258,-91.15043

 

It was activated last week and I'm sure its been mapped at a higher signal many times recently but it will take a lot to get the areas previously mapped light purple to the correct color.

Link to comment
Share on other sites

Then the fun part begins...  all the low signals near a new site will take many passes to get them up as Sensorly averages the signal reports.  Some of them were mapped low so many times that I swear I've probably passed like 20-30 times and the color hasn't budged much even when the signal is high.  I end up just driving on another road nearby that isn't mapped so I can map some deep purple on the map to show the site is on. 

 

For example:

 

Look at this one:  http://www.sensorly.com/map/4G/US/USA/Sprint/lte_310sprint#q=30.42258,-91.15043

 

It was activated last week and I'm sure its been mapped at a higher signal many times recently but it will take a lot to get the areas previously mapped light purple to the correct color.

Wow! That's alot of purple...but yeah, I get what you're saying. I was thinking about the possibilities of it changing with whatever tweaking they do on the sites.

Link to comment
Share on other sites

Wow! That's alot of purple...but yeah, I get what you're saying. I was thinking about the possibilities of it changing with whatever tweaking they do on the sites.

 

Don't get too excited..  I kind of remove the light purple areas from my view as it really isn't usable LTE unless you are standing outside holding your phone above your head. 

Link to comment
Share on other sites

Don't get too excited..  I kind of remove the light purple areas from my view as it really isn't usable LTE unless you are standing outside holding your phone above your head. 

LOL...that's funny you say that. The difference between standing in my front yard compared to the back will put you in those predicaments. I find myself contorting just a bit to try and alter the signal. :P

Link to comment
Share on other sites

Live on Prien Lake Rd!

 

Sent from my SPH-L720 using Tapatalk 4

 

Think pokefan scooped it a couple days ago and mapped on Sensorly.  Please post a screenshot of the LTE engineering screen when you have chance.  Dial ##DEBUG#, the code is 777468(Sprint), pick LTE engineering.

Link to comment
Share on other sites

If you still need them I can grab it on my way home this evening.

 

I have them down as "153, 322, 491 ?" which marks them as yellow since the screenshot was only a  -97 signal which isn't 100% confirmation.

Link to comment
Share on other sites

I have laterm down as "153, 322, 491 ?" which marks them as yellow since the screenshot was only a -97 signal which isn't 100% confirmation.

322 is what I grabbed the other day with a -86. I'll head that way later and verify the other 2.

post-12519-0-18795700-1376347156_thumb.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...