Jump to content

Network Vision/LTE - Louisiana Market (Lake Charles, Lafayette, Alexandria, Beaumont/Port Arthur Texas)


pokefan02

Recommended Posts

  • 2 weeks later...

There is currently 3 towers in the Sulphur, Maplewood area that have had upgrades accepted. One is west of 108 on Maplewood Dr. ,one is off of Swisco rd and Carbide Rd and the 3rd is on Houston River Rd not far from Beglis. If you are by one it is possible they are causing problems

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I'm not even a mile from the Maplewood tower. Thanks.

My shop is off of Maplewood & Hazel. I've been getting some great 3G speeds as of late. ;)

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

Sprint lte is active in port ArthurSent from my SPH-L710 using Tapatalk 2

Nice! Quicker than I thought! I hope you are mapping it out on Sensorly for others. Please post LTE engineering screen shots as well as I may do a spreadsheet for this market to keep track of serving cells.

Link to comment
Share on other sites

I just had gotten out the gate at work and saw the 4g icon lit up... I'm gonna have to turn sensorly on and ride back by the plant so I can map it out. As the tower I'm on now isn't lte active yet.

 

Sent from my SPH-L710 using Tapatalk 2

 

 

Link to comment
Share on other sites

I just had gotten out the gate at work and saw the 4g icon lit up... I'm gonna have to turn sensorly on and ride back by the plant so I can map it out. As the tower I'm on now isn't lte active yet.

 

Sent from my SPH-L710 using Tapatalk 2

I highly recommend the LTE discovery app from the play store. It will cycle the airplane mode to help find it. The SignalCheck app is also good for showing your LTE signal strength as the bars only shows your 1x signal strength.

 

Make sure you hit map trip and start on sensorly then lay down some purple.

  • Like 1
Link to comment
Share on other sites

I highly recommend the LTE discovery app from the play store. It will cycle the airplane mode to help find it. The SignalCheck app is also good for showing your LTE signal strength as the bars only shows your 1x signal strength.

 

Make sure you hit map trip and start on sensorly then lay down some purple.

Will do!

 

Sent from my SPH-L710 using Tapatalk 2

 

 

Link to comment
Share on other sites

I know it doesn't mean much but check it out!

 

Sent from my SPH-L710 using Tapatalk 2

 

I'm sure the Lake Charles folks will be jealous!  ;)  But this definitely means their turn is right around the corner! 

 

Seeing your screenshots I hope the ROM you have they didn't change the carrier files to their name (some idiot developers do this), otherwise Sensorly won't lay down anything on the map. 

 

So where is this located in Port Arthur?

Link to comment
Share on other sites

I'm sure the Lake Charles folks will be jealous! ;) But this definitely means their turn is right around the corner!

 

Seeing your screenshots I hope the ROM you have they didn't change the carrier files to their name (some idiot developers do this), otherwise Sensorly won't lay down anything on the map.

 

So where is this located in Port Arthur?

Its the L shape on the port Arthur map I laid all that down the tower that I suspect is throwing Lte signals is on hwy 73 between 9th ave and memorial blvd. I also hit Lte on hwy 365 but it might not be ready as it kept kicking me off

 

Sent from my SPH-L710 using Tapatalk 2

 

 

Link to comment
Share on other sites

Its the L shape on the port Arthur map I laid all that down the tower that I suspect is throwing Lte signals is on hwy 73 between 9th ave and memorial blvd. I also hit Lte on hwy 365 but it might not be ready as it kept kicking me off

 

Sent from my SPH-L710 using Tapatalk 2

 

Nice job!  I see it on the map now. 

 

Go into your LTE Engineering screen.  Dial ##DEBUG#, the code is 777468 (SPRINT).  Pick LTE engineering.  Even though you are not connected it should have a three digit serving cell.  These will be very important to determine if you have a second site or not. 

 

Read about why here:  http://s4gru.com/index.php?/topic/2198-network-visionlte-new-orleans-market/page-38&do=findComment&comment=90231

Link to comment
Share on other sites

Sent from my SPH-L710 using Tapatalk 2

Those aren't good signals so you must be far. The best I have seen personally is a -55 or so. Generally if you have a -70 to -80 the tower is in view. -118 or so and it is about to go bye bye.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...