Jump to content

It's a Samsung RRH for WiMax/TD-LTE running thru the FCC


Recommended Posts

Posted yesterday on the FCC Website is a Class 2 permissible change for a Samsung RRH for WiMax/TD-LTE

 

It was tested for 20MHz TD-LTE channels, supports dual mode servicing of both networks, and the specific change on the report was the change to support 4x4 MIMO. They are gearing up for Network Vision 2.0! Talk about exciting times. I can't wait!

 

Note:

Original FCC certification was dated November 15, 2012.

  • Like 6
Link to comment
Share on other sites

sounds like it's specifically for Clearwire... not sure of another domestic carrier that would be remotely interested in that. wouldn't that be something if their LTE rollout on 2500/2600 would be an expansion of WiMAX as well.

  • Like 1
Link to comment
Share on other sites

sounds like it's specifically for Clearwire... not sure of another domestic carrier that would be remotely interested in that. wouldn't that be something if their LTE rollout on 2500/2600 would be an expansion of WiMAX as well.

 

Sprint is the other carrier, especially if the Clearwire merger goes through. But I don't expect an expansion of WiMax though.

Link to comment
Share on other sites

When Clearwire starts the TD-LTE expansion will they be using the same panels? A lot of the protection sites with the newest equipment were never really optimized for WiMax. If they start to use them for LTE wouldn't the WiMax also get enhanced because they would need to adjust the panels?

Link to comment
Share on other sites

Maybe we are reading too much into the Wimax side of this device. It could be that TD-LTE and Wimax are similar enough that having Wimax support was almost free to add.

 

The FCC docs said they are dual mode RRH's that support simultaneous use of both technologies. Whether they use the WiMax side or not is up to Clearwire. 2015 isn't very far away, and we don't even know if Clearwire is even going to use these.

Link to comment
Share on other sites

The FCC docs said they are dual mode RRH's that support simultaneous use of both technologies. Whether they use the WiMax side or not is up to Clearwire. 2015 isn't very far away, and we don't even know if Clearwire is even going to use these.

 

Oh, that was my oversight. Thanks for the clarification.

Link to comment
Share on other sites

Lots of the time getting pdf files from the FCC website works best in IE, also Chrome works ok. Not great for a Linux user like me.

 

I have no problems with Firefox. Sometimes there is a delay, but it isn't that much of one.

Link to comment
Share on other sites

Lots of the time getting pdf files from the FCC website works best in IE, also Chrome works ok. Not great for a Linux user like me.

I'm currently using Chrome. Generally it seems like direct linking to a FCC file gets me the error page. But accessing via the file index page works fine.

Link to comment
Share on other sites

  • 1 month later...

As I have been keeping vigil, watching for the Samsung Galaxy S4 authorizations to come through the FCC OET, I came across this Class II Permissive Change authorization for the Samsung TD-LTE/WiMAX dual mode RRH:

 

https://apps.fcc.gov...d=A3LSLS-BD106Q

 

AJ

Link to comment
Share on other sites

What does this mean?

 

It means that Samsung is potentially one of Clearwire's LTE upgrade Vendors.

 

As I have been keeping vigil, watching for the Samsung Galaxy S4 authorizations to come through the FCC OET, I came across this other interesting Samsung authorization for a TD-LTE/WiMAX dual mode RRH:

 

https://apps.fcc.gov...d=A3LSLS-BD106Q

 

AJ

 

I came across the original filings, but am surprised they keep modifying the setup. I posted about it here, AJ

Link to comment
Share on other sites

As I have been keeping vigil, watching for the Samsung Galaxy S4 authorizations to come through the FCC OET, I came across this Class II Permissive Change authorization for the Samsung TD-LTE/WiMAX dual mode RRH:

 

https://apps.fcc.gov...d=A3LSLS-BD106Q

 

AJ

 

AJ, there was also a first model WiMax/TD-LTE RRH, model number was SLS-BD104Q1. It's frequency range is 2506 to 2680 while the SLS-BD106Q you posted about has a frequency range of 2496 to 2690. What's the reason for the extra 20 MHz?

Link to comment
Share on other sites

 

 

AJ, there was also a first model WiMax/TD-LTE RRH, model number was SLS-BD104Q1. It's frequency range is 2506 to 2680 while the SLS-BD106Q you posted about has a frequency range of 2496 to 2690. What's the reason for the extra 20 MHz?

 

The most likely reason is that to make it compatible with more frequencies does not change the usage. If clearwire currently only has 2506mhz but in the future more spectrum is auctioned, these will be compatible. Also, if they are making them for other markets like China, there might be a slight difference in bands... and the availability of wimax will not hurt them, but will allow production to gain economies of scale due to only having to produce/engineer one product for everyone in this spectrum band across the world.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...