Jump to content

Something odd about panels


markjcc

Recommended Posts

This is a dedicated (i think) Clearwire Wimax site

but i know it hosts clear's Wimax 2.5Ghz but today while driving i noticed something about it @ the top there are small panels that appear to not have wires running to them and they been there for awhile now.

 

2012-12-15_1803.png

 

Could this be LTE?

Edited by markjcc
Link to comment
Share on other sites

Your photo is blurry. It's hard to see. Where in the world is this?

 

Robert

Hawaii Maui Near W Kaahumanu Ave

 

2012-12-15_1916.png

ill switch to my other phone and get a better picture.

Edited by markjcc
Link to comment
Share on other sites

ill switch to my other phone and get a better picture.

 

This is akin to saying, "I'll switch to my other car to make a better omelet," if you catch my drift...

 

;)

 

AJ

  • Like 2
Link to comment
Share on other sites

My Pinto makes a great omelet.

 

I take it "Pinto" is the name of the Mexican illegal immigrant smuggled up I-35 to cook and clean for you.

 

;)

 

AJ

  • Like 3
Link to comment
Share on other sites

 

My Pinto makes a great omelet.

 

I thought the Pinto only made food char-grilled?

 

Robert via Samsung Note II via Tapatalk

 

 

  • Like 3
Link to comment
Share on other sites

I thought the Pinto only made food char-grilled?

 

Oh, are we talking about the Ford Pinto, the car? In that case, it makes food only blackened.

 

 

;)

 

AJ

  • Like 3
Link to comment
Share on other sites

 

Oh, are we talking about the Ford Pinto, the car? In that case, it makes food only blackened.

 

 

;)

 

AJ

 

The Ford Pinto...Unsafe at any flavor.

 

Robert via Samsung Note II via Tapatalk

 

 

Link to comment
Share on other sites

The Ford Pinto...Unsafe at any flavor.

 

Meanwhile, our Lousiana members, digiblur and bigzeto, are saying, "Blackened...mmm..."

 

AJ

  • Like 6
Link to comment
Share on other sites

Alright well i have a better picture but i noticed something weird with my service in a good way

the speeds got faster and my modem Frequency 2651500 kHz

 

2.6Ghz?? i thought clear uses 2.5Ghz

 

First, I would question whether your modem reports its uplink channel frequency with the right unit of measurement (e.g. Hz, kHz). Second, wireless spectrum usage is very different from wired spectrum usage because the latter is largely confined to physical cables.

 

AJ

Link to comment
Share on other sites

As to my previous post

http://s4gru.com/index.php?/topic/2685-clear/page__view__findpost__p__71936

 

i called in clear last night and asked them about that

they checked the tower and they are reporting issues on it Speed and Connection Wise and there sending someone there to fix it!

 

Problem is are they going to fix it lol...

Link to comment
Share on other sites

First, I would question whether your modem reports its uplink channel frequency with the right unit of measurement (e.g. Hz, kHz). Second, wireless spectrum usage is very different from wired spectrum usage because the latter is largely confined to physical cables.

 

AJ

 

The Clear Spot Voyager does indeed use KHz as the frequency unit, as markjcc posted. As does the Clear Hub Express. Judging from his posts, "modem" = a Clear Hub Express or similar, sucking in WiMAX in BRS/EBS and spitting out WiFi in the 2400000 KHz band (yep, I'm being obnoxious)...or wired copper Ethernet, if that's your flavor.

 

Spreaking of flavor, it's been awhile since I've had good Cajun food. I'd say I'd remedy that while en route to Florida Sunday, but Prejean's is way too expensive these days.

Link to comment
Share on other sites

The Clear Spot Voyager does indeed use KHz as the frequency unit, as markjcc posted. As does the Clear Hub Express. Judging from his posts, "modem" = a Clear Hub Express or similar...

 

I expected cable modem, which is likely using an uplink channel below 100 MHz (100,000 kHz). But if we are talking WiMAX modem, then the BRS/EBS band is 2496-2690 MHz (2.496-2.690 GHz).

 

AJ

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...