Jump to content

Network Vision/LTE - Tampa Market


Feech

Recommended Posts

is this something that will come fast or slow

 

Who knows. We are closer than when I started on this site a few months back thats for sure. Over the last 2 months we have found about 8 or 9 sites that have panels installed and cabinets done and as far as we can tell waiting for Sprint testing and approval. Thats what may have been going on with that site in South St. Pete. From the speed I got there it was not ready for prime time but again that could have been this rachet ass phone of mine too. I think the next 2 weeks are going to be interesting in this market. I know you are not a sponsor but if you could see the maps of the in progress sites in Pinellas County you can see the patern of sites and where the initial coverage will be. I'm excited because I either live, travel, or work in these areas and most of them I have persoanlly been to or reported as in progress. I think. THINK being the magic word that these sites will all light up at once and provide a pretty good initial swarth of coverage although spotty in Pinellas from Tyrone Blvd to Ulmerton rd (Noth/South) and 66th/Ulmerton to Seminole (East/West) This is all me speculating but it sure looks that way.

Link to comment
Share on other sites

Who knows. We are closer than when I started on this site a few months back thats for sure. Over the last 2 months we have found about 8 or 9 sites that have panels installed and cabinets done and as far as we can tell waiting for Sprint testing and approval. Thats what may have been going on with that site in South St. Pete. From the speed I got there it was not ready for prime time but again that could have been this rachet ass phone of mine too. I think the next 2 weeks are going to be interesting in this market. I know you are not a sponsor but if you could see the maps of the in progress sites in Pinellas County you can see the patern of sites and where the initial coverage will be. I'm excited because I either live, travel, or work in these areas and most of them I have persoanlly been to or reported as in progress. I think. THINK being the magic word that these sites will all light up at once and provide a pretty good initial swarth of coverage although spotty in Pinellas from Tyrone Blvd to Ulmerton rd (Noth/South) and 66th/Ulmerton to Seminole (East/West) This is all me speculating but it sure looks that way.

haha ratchet ass phone and how much is it to become a sponser
Link to comment
Share on other sites

Who knows. We are closer than when I started on this site a few months back thats for sure. Over the last 2 months we have found about 8 or 9 sites that have panels installed and cabinets done and as far as we can tell waiting for Sprint testing and approval. Thats what may have been going on with that site in South St. Pete. From the speed I got there it was not ready for prime time but again that could have been this rachet ass phone of mine too. I think the next 2 weeks are going to be interesting in this market. I know you are not a sponsor but if you could see the maps of the in progress sites in Pinellas County you can see the patern of sites and where the initial coverage will be. I'm excited because I either live, travel, or work in these areas and most of them I have persoanlly been to or reported as in progress. I think. THINK being the magic word that these sites will all light up at once and provide a pretty good initial swarth of coverage although spotty in Pinellas from Tyrone Blvd to Ulmerton rd (Noth/South) and 66th/Ulmerton to Seminole (East/West) This is all me speculating but it sure looks that way.

and how do you become a sponser
Link to comment
Share on other sites

 

 

Who knows. We are closer than when I started on this site a few months back thats for sure. Over the last 2 months we have found about 8 or 9 sites that have panels installed and cabinets done and as far as we can tell waiting for Sprint testing and approval. Thats what may have been going on with that site in South St. Pete. From the speed I got there it was not ready for prime time but again that could have been this rachet ass phone of mine too. I think the next 2 weeks are going to be interesting in this market. I know you are not a sponsor but if you could see the maps of the in progress sites in Pinellas County you can see the patern of sites and where the initial coverage will be. I'm excited because I either live, travel, or work in these areas and most of them I have persoanlly been to or reported as in progress. I think. THINK being the magic word that these sites will all light up at once and provide a pretty good initial swarth of coverage although spotty in Pinellas from Tyrone Blvd to Ulmerton rd (Noth/South) and 66th/Ulmerton to Seminole (East/West) This is all me speculating but it sure looks that way.

 

The consensus seems to be that most of the Evo's connection issues were fixed.

Link to comment
Share on other sites

I went south today and didn't get anything at all where we initially mapped. Easy come easy go. I swear these Ericsson techs are watching sensorly more than us. If I catch one I will make him tell me all his secrets.

 

I'm still trying to figure out why they were on the tower around the corner from my house on Thursday night. Pitch black out and they are climbing like they got nothing to do.

 

Are Ericsson Techs like leprechauns? Does he have to give you his pot of LTE if you catch him?

  • Like 2
Link to comment
Share on other sites

I'll be going to map the Clearwater site later today unless one of you get there before me.. Let me know..

 

Sent from my EVO using Tapatalk 2

 

been away from the board for a little while? there is a Clearwater site now?

Link to comment
Share on other sites

One of the downtown Tampa sites (TBT Forum) has been updated as complete by S4GRU. Can anyone confirm/map it?

 

Its been on the update I think since the Republican convention but everyone that has gone there has not been able to connect to it

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

We should check up on that Channelside site. Chances are that it is broadcasting now.
<br /><br />I think Wildman gets by there quite a bit it's a drive by for him <br /><br />Sent from my EVO using Tapatalk 2<br /><br /><br />
Link to comment
Share on other sites

First time poster. Just did my first Sensorly mapping. I live in Wesley Chapel, and drive through Land 'O Lakes daily. I mapped 4G on I75 North of Fletcher all the way up to SR56. I also mapped behind the Dodge Dealer on SR54 W of SR56. I also mapped 4G down County Line Road, then West on Collier Parkway. The 4G dropped of at SR41 @ Collier Pkwy. I then drove N on SR41 and got 4G starting just S of SR 54. I drove back East on SR54 and the 4G was strong. I turned N at the SR54 & SR56 fork. The 4G dropped soon afterwards... I was in Orlando and Cocoa today too, & got 4G there as well. I may post more later...

 

Sent from my Galaxy S III

  • Like 1
Link to comment
Share on other sites

First time poster. Just did my first Sensorly mapping. I live in Wesley Chapel, and drive through Land 'O Lakes daily. I mapped 4G on I75 North of Fletcher all the way up to SR56. I also mapped behind the Dodge Dealer on SR54 W of SR56. I also mapped 4G down County Line Road, then West on Collier Parkway. The 4G dropped of at SR41 @ Collier Pkwy. I then drove N on SR41 and got 4G starting just S of SR 54. I drove back East on SR54 and the 4G was strong. I turned N at the SR54 & SR56 fork. The 4G dropped soon afterwards... I was in Orlando and Cocoa today too, & got 4G there as well. I may post more later...

 

Sent from my Galaxy S III

 

Please post more when you get a chance.. Thanks for mapping for us

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

The 4G speeds I saw around Land O Lakes were around 10Mb down and 5Mb up, with some spots higher some lower. I got up to 24Mb down and over 10Mb up on I75 in Cocoa...

 

Sent from my Galaxy S III

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...