Jump to content

Force faster connection


Recommended Posts

I am at a campground and there are antennas on both sides of the campground. One side has been upgraded to the faster 3g but the other has not. My phone seems to connect to the slower one because I am only getting .02 Mbps down. Does anyone know if there is a way to force my nexus 5 to connect to the faster tower or even better yet LTE because there is an LTE tower just a short distance from here. I am rooted by the way. I don't know if that will help.

 

I am at the Myrtle Beach Koa if a member cares to look at the tower upgrade map to see what I mean about the towers.

 

Any help would be appreciated.

Link to comment
Share on other sites

Yeah KOA is right in the one major hole in LTE coverage. I have .15 radios and it seems to do the best with our market having band 25 as the one available channel.

 

1x800 is through town though. For what that is worth.

 

I connect max 4.5 to 5 miles out on LTE here with .15, .13 gets about 3.5 miles maybe 4 to the site. No band 26 yet.

Link to comment
Share on other sites

I am at a campground and there are antennas on both sides of the campground. One side has been upgraded to the faster 3g but the other has not. My phone seems to connect to the slower one because I am only getting .02 Mbps down. Does anyone know if there is a way to force my nexus 5 to connect to the faster tower or even better yet LTE because there is an LTE tower just a short distance from here. I am rooted by the way. I don't know if that will help.

 

I am at the Myrtle Beach Koa if a member cares to look at the tower upgrade map to see what I mean about the towers.

 

Any help would be appreciated.

 

If a site is still listed as 3G, a red pin, that does not mean it has faster 3G.

 

That just means the new equipment has been installed, and the legacy equipment turned off. 3G will only get faster when the upgraded backhaul arrives. When that happens, the site will also be 4G accepted (yellow). At which point you probably wouldn't need 3G anyway. 

  • Like 3
Link to comment
Share on other sites

Yeah KOA is right in the one major hole in LTE coverage. I have .15 radios and it seems to do the best with our market having band 25 as the one available channel.

 

1x800 is through town though. For what that is worth.

 

I connect max 4.5 to 5 miles out on LTE here with .15, .13 gets about 3.5 miles maybe 4 to the site. No band 26 yet.

So you are able to get connected to band25 LTE at the KOA? How?

Link to comment
Share on other sites

Yeah, if they are just using their maps to decide if you have coverage, I'm sure they'll make that conclusion. However, Sprint's LTE coverage maps are grossly overstative. You need to look at our Sponsor maps and see where the sites are that actually have LTE live on them. Sprint LTE coverage maps are just not reliable. Even outdoors.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

  • Like 3
Link to comment
Share on other sites

So you are able to get connected to band25 LTE at the KOA? How?

Can't say for koa personally, only that I have had trouble through the area as well. The different radio is my solution for now. Not sure if it will help in that area particularly.

 

Keep in mind there are a ton of tourists in town, so what we do have for LTE gets stressed at times, as well as 3g. Like Robert says, check the maps, check sensorly, if any shows up there you may have a shot.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...