Jump to content

4G to 3G to 4G


Recommended Posts

4G LTE is very good now in the Lake County area north of Lake Cook Rd. for the past week. However, can someone explain the technology between switching from 3G to 4G LTE? When I enter a building from a well saturated area of LTE outside with no issues driving for about 20 minutes connected to super fast LTE, and then when I enter the building it goes to 3G. This is understandable when in the building. However, when I come out and take the same route home there is no connection to LTE at all. It only works if I cycle through LTE/CDMA or update the PRL list. Isn't this suppose to be the opposite of the WiMAX disaster? Can someone take me through the technology? FYI this is a well saturated area of 4G LTE with no issues outside for 1 week now. I am interested on how this new technology will work with Network Vision. Thank you.

Link to comment
Share on other sites

You have a weak LTE signal when you walk indoors, you just don't realize it. Read this thread: http://s4gru.com/index.php?/topic/2040-bars-lie-for-lte-signal-strength-how-to-determine-your-actual-lte-signal-strength/

 

Though you have decent LTE coverage, it is nowhere near as dense yet as the 3G network. LTE is nowhere near complete in Lake County and not ready to compare to WiMax yet.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

  • Like 1
Link to comment
Share on other sites

I am in an area that is getting 30 mpbs down and 10 up consistently. When I leave the building and go outside it does not connect to 3G unless I do the above specified. I understand the signal strength meter is for voice. I read that post recently.

Edited by abepilot
Link to comment
Share on other sites

I am in an area that is getting 30 mpbs down and 10 up consistently. When I leave the building and go outside it does not connect to 3G unless I do the above specified. I understand the signal strength meter is for voice. I read that post recently.

 

If you have a strong LTE signal outdoors and no signal indoors, then it is your building.

 

I can tell you based on our observations, going indoors produced a 8 to 12 dBm signal reduction. A strong LTE signal of approx -90dBm would be reduced to -102dBm RSRP, a way more than usable LTE signal.

 

If you are losing more than 12dBm going inside, then you are going into a building that is affecting signal way more than normal. And some building types are just brutal to RF.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

Link to comment
Share on other sites

If you have a strong LTE signal outdoors and no signal indoors, then it is your building.

 

I can tell you based on our observations, going indoors produced a 8 to 12 dBm signal reduction. A strong LTE signal of approx -90dBm would be reduced to -102dBm RSRP, a way more than usable LTE signal.

 

If you are losing more than 12dBm going inside, then you are going into a building that is affecting signal way more than normal. And some building types are just brutal to RF.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

 

 

Actually, Robert, it doesn't seem like he has a problem with losing his signal indoors. He expects it and is OK with it. His problem is that when he leaves the building and is now in a well-saturated LTE area outdoors, his phone is not reconnecting to LTE.

Link to comment
Share on other sites

Actually, Robert, it doesn't seem like he has a problem with losing his signal indoors. He expects it and is OK with it. His problem is that when he leaves the building and is now in a well-saturated LTE area outdoors, his phone is not reconnecting to LTE.

 

He says his device goes to the 3G when he goes indoors, thus he loses LTE when he goes indoors. Two separate issues.

 

Most Sprint LTE devices are having issues of connecting to LTE automatically when they come into a new LTE area. When he goes back outside, it is the same as driving into a new area. He has to force the device to scan for LTE, via airplane mode or PRL update. The scan timers are set pretty far out to preserve battery life.

 

However, the iPhone 5 seems to have its scan set at much shorter intervals, and people connect to LTE much faster when coming into a coverage area. The GS3 is a little slower than the iPhone, the GNex and LG Viper slower still, and the EVO LTE almost always has to have a force scan.

 

Robert

Link to comment
Share on other sites

He says his device goes to the 3G when he goes indoors, thus he loses LTE when he goes indoors. Two separate issues.

 

Robert

 

Yes, but he says that that's not his problem.

 

 

4G LTE is very good now in the Lake County area north of Lake Cook Rd. for the past week. However, can someone explain the technology between switching from 3G to 4G LTE? When I enter a building from a well saturated area of LTE outside with no issues driving for about 20 minutes connected to super fast LTE, and then when I enter the building it goes to 3G. This is understandable when in the building. However, when I come out and take the same route home there is no connection to LTE at all. It only works if I cycle through LTE/CDMA or update the PRL list. Isn't this suppose to be the opposite of the WiMAX disaster? Can someone take me through the technology? FYI this is a well saturated area of 4G LTE with no issues outside for 1 week now. I am interested on how this new technology will work with Network Vision. Thank you.

 

His problem is that his phone is not reconnecting to LTE when he leaves the building.

 

 

Edit: Robert's edit addressed the issue. Disregard this.

 

Edit 2: Maybe it's the difference in devices or the ROM I'm using, but I don't usually have trouble connecting to LTE as soon as I reach an LTE area. Maybe my device is just scanning at the right time.

Edited by EndlessDissent
Link to comment
Share on other sites

Let me clarify my original post. I don't care about LTE in a building. I use Wi-Fi when inside my home and business. When I leave the building it simply connects to 3G and not LTE unless I do what I originally posted. Airplane mode,update PRL,or cycle LTE/CDMA radio. This is a very strong -75to-85 dB LTE area. I get 30 + down and 10+ up. I have a Galaxy Nexus LTE with Jelly Bean 4.1.1.

Edited by abepilot
Link to comment
Share on other sites

Yes, but he says that that's not his problem.

 

 

Today was a difficult day for me to run the board. I had to do all my site reading via a wireless connection and on my phone during work meetings, going through dozens of PM's and posts. I rushed quickly through this one and missed some important details in the OP. In retrospect after going back and re-reading the post, I finally absorbed the original point.

 

I just saw going inside building lost LTE, and why is this different than the WiMax debacle when I initially read the post. Thank you both for your patience.

 

Robert

Link to comment
Share on other sites

Let me clarify my original post. I don't care about LTE in a building. I use when inside my home and business. When I leave the building it simply connects to 3G and not LTE unless I do what I originally posted. Airplane mode,update PRL,or cycle LTE/CDMA radio. This is a very strong -75to-85 dB LTE area. I get 30 + down and 10+ up. I have a Galaxy Nexus LTE with Jelly Bean 4.1.1.

 

I have answered your question above. http://s4gru.com/index.php?/topic/2215-4g-to-3g-to-4g/page__view__findpost__p__51829

 

Robert

Link to comment
Share on other sites

When I have my EVO 3D, I get 4G inside my building. Now only 3G on my HTC 4G LTE phone.

 

This is weak LTE signal and not LTE penetration right?

 

Because WiMax is a full deployment in your area and the nearest WiMax site to you is much closer than the nearest LTE site is now. As the deployment completes in Atlanta, you will find LTE coverage to be far superior to WiMax.

 

Robert

  • Like 1
Link to comment
Share on other sites

Because WiMax is a full deployment in your area and the nearest WiMax site to you is much closer than the nearest LTE site is now. As the deployment completes in Atlanta, you will find LTE coverage to be far superior to WiMax.

 

Robert

 

Thanks Robert. Once I get LTE inside my office bulding, my life will come full circle. I already got consistant LTE at my house.

  • Like 1
Link to comment
Share on other sites

 

Once I get LTE inside my office bulding, my life will come full circle.

 

Sing along...

 

It's the Circle of LTE

And it moves us all

Through despair and hope

Through faith and love

Till we find our place

On the path unwinding

In the Circle

The Circle of LTE

 

AJ

  • Like 1
Link to comment
Share on other sites

That would have been so much more effective if you'd have edited out Simba and Photoshopped in an LTE panel or something.

 

We have converted you! Welcome to the Club. You are now a certified Wireless Dork!!!

 

Robert

Link to comment
Share on other sites

Followup challenge (emphasis on challenge because I think it'd be a bit more difficult): Photoshops of a couple animal shots in the valley below with cellphones.

 

For an assist, see the intro vid here: http://youtu.be/4sqP9RpVR0E?t=3m

 

Probably would have to limit it to either the elephant trunks or excited chimps...zebras wouldn't really work well *g*

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • A heavy n41 overlay as an acquisition condition would be a win for customers, and eventually a win for T-Mobile as that might be enough to preclude VZW/AT&T adding C-Band for FWA due to spreading the market too thinly (which means T-Mobile would just have local WISPs/wireline ISPs as competition). USCC spacing (which is likely for contiguous 700 MHz LTE coverage in rural areas) isn't going to be enough for contiguous n41 anyway, and I doubt they'll densify enough to get there.
    • Boost Infinite with a rainbow SIM (you can get it SIM-only) is the cheapest way, at $25/mo, to my knowledge; the cheaper Boost Mobile plans don't run on Dish native. Check Phonescoop for n70 support on a given phone; the Moto G 5G from last year may be the cheapest unlocked phone with n70 though data speeds aren't as good as something with an X70 or better modem.
    • Continuing the USCC discussion, if T-Mobile does a full equipment swap at all of USCC's sites, which they probably will for vendor consistency, and if they include 2.5 on all of those sites, which they probably will as they definitely have economies of scale on the base stations, that'll represent a massive capacity increase in those areas over what USCC had, and maybe a coverage increase since n71 will get deployed everywhere and B71 will get deployed any time T-Mobile has at least 25x25, and maybe where they have 20x20. Assuming this deal goes through (I'm betting it does), I figure I'll see contiguous coverage in the area of southern IL where I was attempting to roam on USCC the last time I was there, though it might be late next year before that switchover happens.
    • Forgot to post this, but a few weeks ago I got to visit these small cells myself! They're spread around Grant park and the surrounding areas, but unfortunately none of the mmwave cells made it outside of the parks along the lake into the rest of downtown. I did spot some n41 small cells around downtown, but they seemed to be older deployments limited to 100mhz and performed poorly.    
    • What is the cheapest way to try Dish's wireless network?  Over the past year I've seen them add their equipment to just about every cell site here, I'm assuming just go through Boost's website?  What phones are Dish native?  
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...