Jump to content

htc evo 4g lte root for the new update 1.22


technoman888

Recommended Posts

Maybe someone here knows and can respond, but this Site is more concerned with 4G rollout updates. I think your query would be better served asked or researched at a site more intended for software hacking like xda.

 

Sent from my Nexus 7 (nakasi) using Forum Runner

Link to comment
Share on other sites

Do a Google search for Regawmod its a one click solution. Read the instructions carefully though and understand you are voiding your warranty.

 

I just did this and loaded the Viper4G ROM. I hated having to do a factory reset, but the multitasking issues and other glitches were driving me nuts. The built-in customizability is incredible, and the battery life is really good. I haven't had a Sense reload, so far, and it's very, very smooth, performance-wise.

 

Right now, though, if you have HBOOT 1.15 (which came with 1.22), HTCDev.com is the only way to root the phone, unfortunately.

  • Like 1
Link to comment
Share on other sites

Glad to hear you're a happy camper..and as it is with flashing a new ROM I hear a official update is available today from HTC ..

 

Of course!! And, it has Sense 4.1. LOL! It never stops, does it? At least, now that I am rooted, I can back up my apps and data with Titanium Backup and, once a rooted version of the OTA is available, I can try it out.

 

Of course, the Viper4G ROM will probably get Sense 4.1 very quickly, too.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...