Jump to content

Recommended Posts

Off topic given the sprintness of the forum, but just a general side comment - midday in downtown Portland, particularly indoors, EVDO coverage on Verizon is much more solid than LTE. I can't estimate how many and average spacing of LTE towers are vs EVDO, but if they are roughly the same its sort of interesting that EVDO has ancedotally better coverage.

Link to comment
Share on other sites

Reports are that VZW is deploying LTE 750 for coverage breadth first, density second. So, only some sites get LTE overlay the first go round. If that is true in a given area, then LTE to EV-DO cannot be an apples to apples coverage comparison -- at least, not yet.

 

That said, my expectations for LTE have tempered somewhat from empirical observation of VZW's and Sprint's LTE roll outs. LTE does seem to be a more fragile airlink than does EV-DO. And that is almost to be expected, as LTE is made up of hundreds of small subcarriers that, individually, are not as robust as is a single spread spectrum carrier.

 

Now, maybe the disparity is a function of devices that are still relatively early in the LTE development cycle. After all, EV-DO development is going on a decade, is now very mature. So, newer LTE devices may continue to improve radio performance. But I do think that we have to consider the real possibility that Sprint's LTE 1900 will usably cover only 80-90 percent of the underlying CDMA1X/EV-DO 1900 footprint.

 

AJ

  • Like 4
Link to comment
Share on other sites

I can tell you as a frequent Verizon network user, that I get Verizon EVDO 850 noticeably farther from a site (and in buildings) than LTE 750 from the same site. However, this is at least partially due to my device (A Verizon ZTE 890L Hotspot).

 

Thankfully, Verizon mostly shows their LTE device signal strength in RSSI, so it makes it a little easier to compare apples to apples. Most of the time, my Verizon EVDO runs around 3-5dBM stronger than LTE from the same site. However, where I really notice the difference is above -90dBm. Verizon LTE dives off a cliff around -92dBm on my hotspot. And download drops to 10% to 20% of full strength speed. Upload usually will drop to 0-200kbps. Around -95dBm RSSI, my Verizon LTE is useless.

 

However, EVDO keeps going strong on VZW 850 through the Nineties, with only a slight drop in performance. EVDO on VZW 850 stays with 80% of speed until approximately -100dBm, and then starts dropping off quickly. At -105dBm, it keeps about 30%-40% of its performance. at -110dBm, it is pretty much unusable.

 

I think AJ's point about the fragile nature of the LTE airlink is the likely culprit, with my device LTE radio playing a minor second role.

 

Robert

  • Like 1
Link to comment
Share on other sites

I think AJ's point about the fragile nature of the LTE airlink is the likely culprit, with my device LTE radio playing a minor second role.

 

If people knew how similar an airlink LTE is to Wi-Fi (802.11a/g/n but not 802.11b, which is more akin to CDMA1X), they might be surprised that LTE works at all as WWAN.

 

AJ

  • Like 1
Link to comment
Share on other sites

Sort of makes me wonder if Sprint knows this.

 

Using the tower spacing that Sprint has now now, LTE probably leave small holes... but deploying voice and LTE on ESMR on just about every site gives it the coverage that users will probably expect.

 

I've noticed similar findings with Verizon 4G.

Link to comment
Share on other sites

Sort of makes me wonder if Sprint knows this.

 

Oh, I am sure that Sprint is aware, as are VZW and AT&T. But no carrier is going to come right out and say, "Hey, LTE data speeds will be a huge leap forward, but coverage will take a step back." This is one reason why I tell those who want to hit the accelerator on VoLTE roll out instead to slow down. For voice coverage and quality, we take for granted how good we have it with CDMA1X.

 

AJ

  • Like 2
Link to comment
Share on other sites

And even with the tower spacing I have now, 1x isn't all that great either. Looks like I will have to make that mod to my case with that high gain retractable antenna :)

 

Sent from my C64 w/Epyx FastLoad cartridge

Link to comment
Share on other sites

And even with the tower spacing I have now, 1x isn't all that great either. Looks like I will have to make that mod to my case with that high gain retractable antenna :)

 

Sent from my C64 w/Epyx FastLoad cartridge

 

What you don't have one yet?

Link to comment
Share on other sites

Is 1x better than EVDO coverage or is that just more towers out there serving 1x?

 

It seems in wide open rural places, I can usually get 1x beyond the edge of service for EVDO a short distance. Rarely more than a mile.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

  • Like 1
Link to comment
Share on other sites

 

It seems in wide open rural places, I can usually get 1x beyond the edge of service for EVDO a short distance. Rarely more than a mile.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

 

I am curious why this is, that in terms of range it seems to be 1x is better than EVDO is better than LTE.

 

You would sort of think that with the most simple modulation possible given equal power and frequencies the wider bandwidth would be able to maintain a useful data signal longer (more bits devoted to error correction / process gain) and thought LTE makes use of a bunch of narrow sub carriers I'd think it would still be an aggregate gain.

 

Is LTE's coding supposed to be significant better than turbo coding?

 

Sent from my Nexus 7 using Tapatalk 2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...