Jump to content

Network Vision/LTE - Tampa Market


Feech

Recommended Posts

I'm tempted to say the Starkey site is up..I drove by today. Usually I lose the 4G signal from another active site when I am slightly north of it. Today I held the signal quite a bit further along with some spotty hits on Brian Dairy.

 

Sent from my EVO using Tapatalk 2

I will be out at that site this week, i will check and see if their fiber has been connected.

Link to comment
Share on other sites

New to the site. Been reading for a short while. Is it possible the LTE at RayJay and Dale Mabry is coming from A Small Tower Located at hillsborough ave and hesperides. Its Located just to the West Side of the Uhaul Building....Got some sick Speedtest reading near that tower.....

We need someone to map that area on Sensorly.

Link to comment
Share on other sites

I'm tempted to say the Starkey site is up..I drove by today. Usually I lose the 4G signal from another active site when I am slightly north of it. Today I held the signal quite a bit further along with some spotty hits on Brian Dairy.

 

Sent from my EVO using Tapatalk 2

 

What tower are you taking about? If your talking about the one on the radio tower between park and Brian dairy that's not up yet. I hope it comes online soon though as that would be the closest tower to where I live.

Link to comment
Share on other sites

where on BB downs was this? indoors or outdoors?

 

BB Downs and Tampa Palms Blvd. I got 10mbps down right outside the Subway in the plaza, but lost the connection as soon as I got inside the building. I wonder if the signal really drops off that much indoors.

 

Sent from my Nexus 7 using Tapatalk HD

Link to comment
Share on other sites

 

BB Downs and Tampa Palms Blvd. I got 10mbps down right outside the Subway in the plaza, but lost the connection as soon as I got inside the building. I wonder if the signal really drops off that much indoors.

 

Sent from my Nexus 7 using Tapatalk HD

 

I have been able to get 10Mbps down to -113dBm RSRP. And you certainly would not be able to keep a weak signal of a strength of that range going inside. In most instances, you will lose 8-12dBm going indoors. If you are 8-12dBm from the threshold, you will not keep it going inside. That's true of every LTE network. And some buildings can be even far worse than 12.

 

Robert via Nexus 7 with Tapatalk HD

Link to comment
Share on other sites

 

I have been able to get 10Mbps down to -113dBm RSRP. And you certainly would not be able to keep a weak signal of a strength of the range going inside. In most instances, you will lose 8-12dBm going indoors. If you are 8-12dBm from the threshold, you will not keep it going inside. That's true of every LTE network. And some buildings can be even far worse than 12.

 

Robert via Nexus 7 with Tapatalk HD

 

This particular instance struck my as oddly unexpected because I was very close to the tower (i.e. the amazing speeds I got just outside the plaza). I didn't check the values on my phone, which I will do next time, but Sensorly identified the area as the strongest level of service. I'm hoping the down tilt will correct this later on, otherwise I certainly wouldn't expect to get LTE indoors.

 

Sent from my Nexus 7 using Tapatalk HD

Link to comment
Share on other sites

 

 

This particular instance struck my as oddly unexpected because I was very close to the tower (i.e. the amazing speeds I got just outside the plaza). I didn't check the values on my phone, which I will do next time, but Sensorly identified the area as the strongest level of service. I'm hoping the down tilt will correct this later on, otherwise I certainly wouldn't expect to get LTE indoors.

 

Sent from my Nexus 7 using Tapatalk HD

I think its our phones. The EVO radio is really weak.

Link to comment
Share on other sites

What tower are you taking about? If your talking about the one on the radio tower between park and Brian dairy that's not up yet. I hope it comes online soon though as that would be the closest tower to where I live.

Yes this is the one the Feech is talking about. All their equipment is there and backhaul was just installed. The company i work for has equipment on the tower so i have access to site. It is interesting to watch the progress of the different components get installed having access. I will check the progress later this week as the other day the fiber backhaul was just installed and not connected to any of their equipment.

Link to comment
Share on other sites

I have been able to get 10Mbps down to -113dBm RSRP. And you certainly would not be able to keep a weak signal of a strength of that range going inside. In most instances, you will lose 8-12dBm going indoors. If you are 8-12dBm from the threshold, you will not keep it going inside. That's true of every LTE network. And some buildings can be even far worse than 12.

 

Robert via Nexus 7 with Tapatalk HD

 

is there a way of getting the LTE signal strength withoug going to the diagnostic screen?

 

I'm on CM10 and the dial codes do not work. CDMA Field Test app give you RSSI , but not RSRP. I know you cant go by the signal the phone shows since thats the 1x signal

Link to comment
Share on other sites

 

is there a way of getting the LTE signal strength withoug going to the diagnostic screen?

 

I'm on CM10 and the dial codes do not work. CDMA Field Test app give you RSSI , but not RSRP. I know you cant go by the signal the phone shows since thats the 1x signal

 

I have not tried CDMA Field Test yet with LTE since they did their update to include that functionality. I do not know of a CM10 workaround. However, I think CM10 actually shows LTE signal strength in bars in the indicator.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 1
Link to comment
Share on other sites

I have not tried CDMA Field Test yet with LTE since they did their update to include that functionality. I do not know of a CM10 workaround. However, I think CM10 actually shows LTE signal strength in bars in the indicator.

 

Robert via Nexus 7 with Tapatalk HD

 

when i was connected to LTE CDMA Field Test did give me different RSSI numbers, but i have not idea what the difference is and which one is better to look at. I still do not a good feel as to what is a good rating. I've gathered that ~100 is poor but thats about it.

Link to comment
Share on other sites

 

 

I have not tried CDMA Field Test yet with LTE since they did their update to include that functionality. I do not know of a CM10 workaround. However, I think CM10 actually shows LTE signal strength in bars in the indicator.

 

Robert via Nexus 7 with Tapatalk HD

I can see LTE strength in the about screen under network on Jellybean.

post-517-0-23934400-1358784041_thumb.png

post-517-0-95709300-1358784063_thumb.png

Link to comment
Share on other sites

I can see LTE strength in the about screen under network on Jellybean.

 

Yes. This is true of the stock EVO, but I wasn't sure if CM10 changed this menu screen.

 

Robert via Nexus 4 using Tapatalk 2

Link to comment
Share on other sites

I can see LTE strength in the about screen under network on Jellybean.

does the "data connection" in Sensorly only show up on LTE? I just tried it on mine and that box was missing. I'm on EVDO right now so I'm not sure if its because it needs stock rom to show that or if its just shown on LTE.

 

Can anyone on a stock rom confirm?

 

Thanks :)

Link to comment
Share on other sites

 

does the "data connection" in Sensorly only show up on LTE? I just tried it on mine and that box was missing. I'm on EVDO right now so I'm not sure if its because it needs stock rom to show that or if its just shown on LTE.

 

Can anyone on a stock rom confirm?

 

Thanks :)

 

Go to the details tab on the bottom right in Sensorly and it will show the network information.

Link to comment
Share on other sites

 

 

Go to the details tab on the bottom right in Sensorly and it will show the network information.

 

that's where I was, but mine shows this. Not sure if it only shows signal info on LTE or if it's because I'm on CM10.1

Link to comment
Share on other sites

Even though the tower on Bearss ave and 275 is broadcasting LTE does that mean they are done adjusting it or working on that tower. I notice my bars fade in and out this weekend. I would go from 2-3 bars on my iPhone then I would have all 5 bars and drastically drop down to 3 bars. Anyone know what's going on?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • I think it is likely that T-Mobile will be forced to honor any existing US cellular roaming agreements in those areas as a condition of them taking over the spectrum.  In that case, there would be no improvement of service unless T-Mobile improves the service offering in those areas.
    • My understanding is the MNO carriers are the one who have objected to the use of cell phones in commercial planes.  I understand that it ties down too many cell phones at once, thus I can not see this changing. However this depends on how it is structured. Use of a different plmn for satellite service might make it possible for planes only to connect with satellite. Private pilots have been using cellphones in planes for many decades. Far fewer phones at a lower altitude.
    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...