Jump to content

Network Vision/LTE - Columbus Market


abrcrmdl23

Recommended Posts

I stopped for lunch in Dresden on my way east on 16 yesterday. I could not get an LTE signal no matter what I tried. However, on my way home last night, SCP started chiming when I approached the area. I was driving and wasn't able to do much but I can verify its existence at least and got a BSL. I launched speed test and it was around 5mbps when I lost the signal.

 

Sent from my Galaxy Nexus using Tapatalk 4

 

Even though you can't see it. I've given you credit for being the first to confirm LTE from this site.

Link to comment
Share on other sites

Even though you can't see it. I've given you credit for being the first to confirm LTE from this site.

Thanks although I'd rather find something in Westerville :) but it looks like in addition to the interstates, SR 16/161 might get some upgrades soon. Certainly from CMH to new albany, and maybe Newark, maybe even to the zanesville exit. I say that because most of the upgrades seem to focus around highways. Also, I saw some vans at a site near 161 and Hamilton rd about a month ago, but nothing else going on there since then.

 

Sent from my Galaxy Nexus using Tapatalk 4

 

 

Link to comment
Share on other sites

Awe man here we go. Gonna have to hunt in your neck of the woods... I've covered most of the southeast, 23&270 to grandview to Neil, German village, merion village, across 104 to 33/70 east to 256 south to almost Lancaster back west to Rickenbacker.

 

Oh Livingston and alum creek is not dangerous. Livingston and lockbourne is. I hit those areas early in the morning when all the troublemakers are passed out.

  • Like 3
Link to comment
Share on other sites

imex99 is lucky that I don't live in New Albany anymore otherwise I would have been went to Newark and Heath. Probably even Dresden.

 

Today's post has been brought to you by Sprint, the letters GN and the number 2.

 

 

Link to comment
Share on other sites

Now I wonder if something is going on today. Earlier I was connecting to the usual towers, but now I'm only getting the 800's out in Picktown and even the one down near Cedar Hill Rd. Strange that I wouldn't be getting a 1900 signal from a closer tower.

Link to comment
Share on other sites

Now I wonder if something is going on today. Earlier I was connecting to the usual towers, but now I'm only getting the 800's out in Picktown and even the one down near Cedar Hill Rd. Strange that I wouldn't be getting a 1900 signal from a closer tower.

Unless you have an iphone then once you are on 800SMR your phone will not scan for PCS no matter the signal strength unless of course the 800SMR goes away.

Link to comment
Share on other sites

Unless you have an iphone then once you are on 800SMR your phone will not scan for PCS no matter the signal strength unless of course the 800SMR goes away.

 

Strange, my regular tower came back as normal, just as I was checking the 1x engineering.

Link to comment
Share on other sites

 

Strange, my regular tower came back as normal, just as I was checking the 1x engineering.

 

That was around noon, though, and of course, just as I check 1x engineering again after saying that, it goes back to the Refugee & Pickerington tower. Time for a trip...

Link to comment
Share on other sites

Even on the upgraded and turned on towers the data still fluctuates. Once they get fiber turned on it will get better. Been at slate run park all day with 4 bars of 800. Obviously this cell is loaded down being in the country. Data is pretty nice here.

  • Like 1
Link to comment
Share on other sites

A question for you guys, have you noticed any sites with just 1 new NV cabniet ? Here in Toledo, they are using a different source for backup battery at some sites. The equipment is put in the NV cab by Ancona Controls.

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

Even on the upgraded and turned on towers the data still fluctuates. Once they get fiber turned on it will get better. Been at slate run park all day with 4 bars of 800. Obviously this cell is loaded down being in the country. Data is pretty nice here.

Picked up 800 on Lithopolis Rd on the way home from groveport. Even on my s2 wish I could prioritize it with all these dropped calls

post-8934-0-80802700-1378164064_thumb.jpg

post-8934-0-84097400-1378164077_thumb.jpg

  • Like 1
Link to comment
Share on other sites

A question for you guys, have you noticed any sites with just 1 new NV cabniet ? Here in Toledo, they are using a different source for backup battery at some sites. The equipment is put in the NV cab by Ancona Controls.

 

Sent from my EVO using Tapatalk 2

We've only been seeing 2 NV cabinets. Sometimes the backsides face each other instead of next to each other, but there has always been two.

 

Today's post has been brought to you by Sprint, the letters GN and the number 2.

 

 

Link to comment
Share on other sites

Picked up 800 on Lithopolis Rd on the way home from groveport. Even on my s2 wish I could prioritize it with all these dropped calls

With 800 still being sparse you're going to run into the increase in drop calls.

 

Today's post has been brought to you by Sprint, the letters GN and the number 2.

 

 

Link to comment
Share on other sites

With 800 still being sparse you're going to run into the increase in drop calls.

 

Today's post has been brought to you by Sprint, the letters GN and the number 2.

I know it seems like it roamed then went to 800 then once it found 1900 I was screwed and back to first base I was impressed with the range
Link to comment
Share on other sites

The range is AMAZING just wait until it's on almost every site. It will be difficult to drop a call.

 

Today's post has been brought to you by Sprint, the letters GN and the number 2.

 

 

Link to comment
Share on other sites

Picked up 800 on Lithopolis Rd on the way home from groveport. Even on my s2 wish I could prioritize it with all these dropped calls

 

If you go grab all three of the 1xPNs from that tower you'll get 5 points in the contest.

Link to comment
Share on other sites

They were at the (not sure if I should say) site again so I decided to go over and talk to the guys. The guy I talked to was real nice and said he's been doing this stuff for 20 years. Here are a few points he made:

 

"It's going to be a rough 6 Months around here."

 

They are turning sites on in clusters because you'll get hard drops if you go from Motorola to the new Samsung hardware.

 

Lancaster is scheduled to turn on 7 sites September 9 but the other guy said there was a possible problem in that cluster.

 

Pickerington is getting worked on hard now as most of you know.

 

Backhaul is taking a while but some small towns are better prepared than you'd think.

 

He said the way the old wimax works if one tower has fiber it can feed many other towers and he was getting 100 mb somewhere the other day but they turn them down before going live.

 

Some of this may be old news.

  • Like 2
Link to comment
Share on other sites

He said the way the old wimax works if one tower has fiber it can feed many other towers and he was getting 100 mb somewhere the other day but they turn them down before going live.

 

To clarify, the backhaul can run at 100Mbps+, but Sprint LTE 1900 cannot.  It is limited to 37.5Mbps download speed.  The airlink cannot support more than that.  A three sector site needs 100Mbps throughput in order to run three sectors running at their maximum speed.

 

Robert

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • After several months of testing, an update to SignalCheck Pro is rolling out on Google Play. It may take up to 48 hours to become available for download. Notable changes include: Added option to display site notes for NSA 5G-NR cells. Enabling this new option (Preferences > Display Settings > Show NSA 5G-NR Site Notes) will cause the app to make an "educated guess" as to what the most appropriate site note is linked to the connected NSA 5G cell, using the PCI and the device location. If it finds an existing entry that is likely to be relevant, it will display the note along with the distance from where the strongest signal from that cell was logged. While connected to NSA 5G, these notes cannot be edited; a valid NCI is required to add/edit notes and that information is not available on NSA connections.   Added option to log cells with missing/invalid PLMN (such as NSA 5G-NR cells). Users asked for the ability to log data for NSA 5G, so a new option (Preferences > Logger Settings > Log Cells with Missing PLMN) will permit this.   Added option to display LTE info above 5G-NR info. Enabling this new option (Preferences > Display Settings > Show LTE Cells Above 5G-NR Cells) shows the same information that is currently displayed, but moves the LTE information above the 5G-NR information. Other changes: Code optimizations and enhancements. Improved Android 15 compatibility. Overhauled Purchases module. Resolved force closes impacting some GSM/LTE connections. Resolved issue with improper 5G-NR PLMN display when NR/LTE PLMNs did not match. Resolved issue with improper PLMN display with single-digit MNCs. Resolved issue with incorrect 5G-NR bands displayed on some devices due to Android bug. Resolved issue with incorrect number of neighbor cells displayed when some cells were unknown. Resolved issue with missing 5G-NR data when sector display is enabled. Resolved issue with saving 5G-NR site notes when NR/LTE PLMNs did not match. Resolved issue with settings to log missing GCI/NCI/TAC/PLMN being ignored. Resolved issues with web data export function. Updated internal libraries. Updated provider database. Updated target API to Android 15. I appreciate all of your support, and a big thank you to the members of the Beta Crew that help with testing and feedback!
    • Oct security update is out.
    • Stopped by again today and the antennas are up but it isn't live just yet. If other Sprint conversions are anything to go by it'll likely take about a month for the site to go live.
    • It is an Android bug that was reportedly fixed in August 2023 but definitely has not been. I have implemented numerous workarounds in SCP to correct the NR bands the app displays. The OS ignores the possibility that many NR-ARFCNs are valid across multiple bands.. it reports the lowest NR band that is valid for the current ARFCN. In your example, channel 432530 can be n1, n65, or n66.. so the OS just (lazily) reports n1.   Awesome, thanks! I will add an n65 override also.
    • Yeah both of those instances were on my AT&T s22 ultra. Seems ro be working as intended today in latest release.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...