Jump to content

Hopefully it gets better


Recommended Posts

:(

 

Ok,

 

Im in Houston and I was able to get LTE but it was very very brief. The way that it connected and lost signal within a 100 yard stretch reminded me of that horrible Wimax..Please say it ain't so that LTE will be just like WIMAX coverage.

Link to comment
Share on other sites

I don't think Houston is completely working right now, so I wouldn't worry about it. On my Galaxy Nexus if I update the PRL it will show 4G for about 10 seconds before dropping back to 3G, I don't think the phone can get data over 4G yet so it drops back to a connection that works.

Link to comment
Share on other sites

It absolutely will get better. LTE will be the same as what EVDO is when it is completed (coverage not speed). Then all sprint has to do is start weeding out the EVDO and expanding LTE.

 

Keep in mind what Robert said about chicken littles. Everyone wanted the LTE towers to not be blocked, yet the sky is falling when there are problems with the network in its infancy.

 

From JBtoro on Forum Runner

  • Like 4
Link to comment
Share on other sites

I don't think Houston is completely working right now, so I wouldn't worry about it. On my Galaxy Nexus if I update the PRL it will show 4G for about 10 seconds before dropping back to 3G, I don't think the phone can get data over 4G yet so it drops back to a connection that works.

 

The PRL has nothing to do with 4G LTE. The reason it's connecting to LTE is because the CDMA radio is cycling from one state to another so with CDMA technically off it's trying to at least get some sort of connection. For example if you disconnect from WiFi your phone will try to connect to 3G or LTE.

Link to comment
Share on other sites

 

 

The PRL has nothing to do with 4G LTE. The reason it's connecting to LTE is because the CDMA radio is cycling from one state to another so with CDMA technically off it's trying to at least get some sort of connection. For example if you disconnect from WiFi your phone will try to connect to 3G or LTE.

 

I never said it had anything to do with LTE, but it is the only way to get the gnex to search for LTE only. I'm surrounded by non LTE towers so it always defaults back to 3G.

Link to comment
Share on other sites

:(

 

Ok,

 

Im in Houston and I was able to get LTE but it was very very brief. The way that it connected and lost signal within a 100 yard stretch reminded me of that horrible Wimax..Please say it ain't so that LTE will be just like WIMAX coverage.

 

Not wimax - sprint is doing every 3G tower - they just want to launch now and backfill later.

 

Wouldn't you rather have sites that you can connect to now instead of waiting for them to finish every single site before launching?

 

Clearwire built the wimax network - you can't compare them.

  • Like 2
Link to comment
Share on other sites

I never said it had anything to do with LTE, but it is the only way to get the gnex to search for LTE only. I'm surrounded by non LTE towers so it always defaults back to 3G.

 

If you want it to stick on LTE switch to LTE only not LTE/CDMA you'll lose the ability to call or text though (AFAIK anyways).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...