djw39

As per my earlier posts, I found it did not behave well in a network with another router. It is now sitting in the box unused. Maybe if Sprint or Asus has a firmware update I will try again.

Here you go. Second screen after hitting "Go" once. The router is not hooked up to the modem, so it cannot detect a connection automatically.

Maybe disconnect the network before you hit quick setup so it doesn't automatically configure?

AJ: sometimes your comments irk me, and other times I completely share your sentiment. This is one of those times, or the other

It was mentioned a few pages back, you can get to AP mode without messing around like that, just by clicking on the quick setup and then "configure manually". I had it set up that way earlier but was having issues with handoff between access points.

Just read this article about poor performance in fridge areashttp://phandroid.com/2015/05/15/this-is-how-i-killed-my-motorola-droid-turbo/

Actually, scratch that. I am having all kinds of problems with the handoff from one router to the other. Log shows "received packet with own address as source address". Some reports on snbforums that firmware updates from Asus have fixed this but who knows if we'll get those on the Sprint version.Anyone else seeing this?

It's a pretty huge update. Probably comparable to Nexus 4G going from 2.3 to 4.0.

It's the same answer for me either way

I set it up as an access point and all good. Not sure what to do with my evenings now if I'm really all done messing with networking stuff...

Seriously? Have we learned nothing from Googlorola?

I have three lines, we typically go to 5 GB or less altogether. I cut us down to 8 GB shared when I realized the only months when we went over that (max 10.3 GB ) were when I was downloading custom roms over LTE. If I just don't do that we can save a ton of money. At one point we were paying close to $200 a month for three lines, now it's down to $115

Yes my modem is bridged. I tried switching my routers so the TP-Link Archer C8 is the main router, and the Airave connects through that just fine. So it is definitely an issue with the Sprint router, or at least how I configured it.I might do a factory reset and give it another shot, but I also can just use the WiFi connect as a second access point until all the phones in the house have WiFi calling and I can ditch the Airave.

While that setup has worked for me in the past, it is not working since I got all this new equipment. Thanks for verifying that it should be possible to get it working, at least. (Sprint customer service said their two boxes would not be able to work together going modem-router-airave)

How did you set up the Sprint/Asus router? Did you give the Airave a static IP, did you change any firewall settings?

So are you confirming you got this Sprint WiFi connect router and it's still working in that configuration? Or with a different router

Anyone successfully running an Airave downstream of this thing? I have given up and put the Airave between the modem and router, it works after I assigned it a static IP and unblocked the upload speeds but I am not crazy about having a 100Mbps port in the middle of my network

My thinking is that the QoS settings specific to Sprint's WiFi-calling are really a rather minor part of this offer. It's more that for people with, say, a single-band netgear router from several years ago, this should be a pretty substantial upgrade for their home network. Or for people such as myself who have one nice router, but can use this to set up a second access point for better in-home WiFi coverage, it's also quite a nice upgrade. It is mostly having a better home WiFi network which will enable a better WiFi-calling experience. The QoS settings are probably nice to have but not essential--with a reasonably fast broadband connection and an up-to-date router you should have a good experience using WiFi calling even without custom QoS. The success of this program is in creating goodwill which should improve customer retention, and Sprint definitely achieves that with the group here.

Sprint sent me both a new Airave (2.5) and the WiFi Connect router. The Airave is still blinking red on mobile, and my wife's iPhone 5s won't connect to the network for WiFi calling either. I called Airave support this morning and the guy had me reboot things for an hour with no success. Anyone else have tips on getting WiFi calling working on an iPhone and/or proper configuration of Airave with the WiFi connect? AJ would you still object to discussions about hacking the firmware on the router if the objective is to set high priority in QoS for the Airave?

I stuck with the Optimus G for a long time until I got the G2 late last year. Each was purchased used for ~$150. I can't see myself spending any more than that on a phone for the foreseeable future. Maybe if there's a good Nexus or Moto X later this year I'll buy it in winter 2016 or something. But so far this year's phones seem pretty comparable to the G2 still.

@david279 to be clear you are describing what it "should" look like if it were running stock Asus firmware instead of the Sprint setup, is that correct?

[Mine comes tomorrow!] Does this generally prioritize all voice traffic, or does it have something specific to Sprint's WiFi calling prioritized? I also have an Airave and a Voip box (Ooma Telo), have to decide whether to put them upstream or downstream of the router, and if I need to forward UDP ports etc. I think if the WiFi Connect router is setting all voice to high priority, I will just attach the extra boxes and not worry about it

Yes, second the recommendation. For WiFi analyzer app. It is also good for figuring out where in your house to put the router(s)

I called a second time (after ordering the router) to ask for help with my Airave and they were like "duh, you have a 2.0 you need the 2.5, we'll send it right out you'll have it in two business days." These people are the best

I ordered the WiFi connect without issue today, no mention of the Airave on the call. What a neat perk, I'll be excited to see how it works. I'm going to run a 100ft ethernet cable to chain my routers up and set up multiple access points, like a boss.