Jump to content

Porting question


vandi

Recommended Posts

I'm converting one of my lines from VOIP to Sprint since there is a deal where you save $100 if you port a number.

 

I tried to pull in a number that came from Verizion Wireless to my VOIP provider some odd years ago, and I attempted to port that number out of my VOIP to Sprint... Sprint now says that they can't port the number, something between it being either a 1x number or iden or something of the sort... This was at a store but it just seems odd.

 

When checking the eligibility with sprint says that it's not able to be ported.  Verizon says they can port it.  I guess they pull their number back? Can someone explain this at all?  

  • Like 1
Link to comment
Share on other sites

Hrm, that's a thought...yeah.. google doesn't support it.. :(  my guess is that I would need to port it back to verizon and then see where I could port it too...

 

Verizon says it would take 10 days to port..I guess I would activate it on a verizon handset.. pay what ever fees it would take and then see if it could be ported out.. $36 activation fee.. service for how many days???  Porbably $100 for a stupid number.

 

not sure if it's worth it.

 

Just curious what could block porting of a number such as this.

Link to comment
Share on other sites

Hrm, that's a thought...yeah.. google doesn't support it.. :(  my guess is that I would need to port it back to verizon and then see where I could port it too...

 

Verizon says it would take 10 days to port..I guess I would activate it on a verizon handset.. pay what ever fees it would take and then see if it could be ported out.. $36 activation fee.. service for how many days???  Porbably $100 for a stupid number.

 

not sure if it's worth it.

 

Just curious what could block porting of a number such as this.

Can you port it to a Verizon Prepaid MVNO?

Link to comment
Share on other sites

Can you port it to a Verizon Prepaid MVNO?

 

The few that I looked at didn't have a porting eligibility page. It might be possible, but no way to very without ordering is what a couple of them said.

Link to comment
Share on other sites

You might be able to call verizon and tell them to release the number for porting, since there was a law about being allowed to port a number from anywhere to anywhere.

Link to comment
Share on other sites

The number originated with Verizon Wireless (could even have been Alltel even) and then ported to my current VOIP provider.  So I'm sure if I called Verizon they would go HUH? we don't have that number...  I'm sure they have the block on it, but getting to the right department would probably be a nightmare.

Link to comment
Share on other sites

I did a "find co" on the number at dsl reports and it can't find the area code??.. it's 704-999-xxxx  if any one is curious.

That's the area code for North Carolina.

 

I remember working at ATT, business lines couldn't be ported out, only redirected, but cellphone and home lines could be ported anywhere, back and forth. Strange.

 

 

-Luis

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...