Jump to content

Non-removable batteries and bootloops


pyroscott

Recommended Posts

OK, so when I get in a boot loop with a phone I am modding, I pull the battery, reinsert and go into recovery or download mode. With a non-removable battery, the manufacturer would have to put a power off button combo on it. I just spent 15 minutes trying to power off my Galaxy Tab and it kept doing a reset with Vol - and Power... man did I feel stupid when I tried Vol + and Power and it turned off. I can just about imagine someone trying to mod the RAZR MAXX, making the same mistake as I did, and waiting 17 days for the battery to die. :lol:

  • Like 1
Link to comment
Share on other sites

That's one or the issues that hasn't been addressed well with these now phones with integrated batteries. The OEMs can do a lot with the design and redesigning components for a slick design, but they haven't thought out issues for the end user. I see a lot of hard resets with these phones when a simple battery pull would have done the trick.

  • Like 2
Link to comment
Share on other sites

That's one or the issues that hasn't been addressed well with these now phones with integrated batteries. The OEMs can do a lot with the design and redesigning components for a slick design, but they haven't thought out issues for the end user. I see a lot of hard resets with these phones when a simple battery pull would have done the trick.

 

It probably works fine for iOS because nobody changes anything on an iPhone "Apple got it perfect when they stole the phone from the heavens" :puke: But Motorola NEEDS the ability to pull the battery, without a doubt. The wife has had her MAXX since Wednesday and it is entirely too buggy for a 3-day old phone that is complete stock with a half dozen programs on it. It's not like the OS is new either. It's gingerbread with the exact same software as the RAZR, they should have worked out the bugs by now. I am VERY unimpressed with Motorola after seeing this pure junk. Then you add that they scare off all the good developers with a locked bootloader. Motorola might know how to make radios, but they have no clue on software. My sister has the RAZR MAXX and complains about the battery life. The main selling point of the phone... probably because the software is awful.

 

Also- I had to do a software reset already on her phone to try to resolve issues with a earpiece that is what I would consider level 1 but is turned up all the way.

Link to comment
Share on other sites

OK, so when I get in a boot loop with a phone I am modding, I pull the battery, reinsert and go into recovery or download mode. With a non-removable battery, the manufacturer would have to put a power off button combo on it. I just spent 15 minutes trying to power off my Galaxy Tab and it kept doing a reset with Vol - and Power... man did I feel stupid when I tried Vol + and Power and it turned off. I can just about imagine someone trying to mod the RAZR MAXX, making the same mistake as I did, and waiting 17 days for the battery to die. :lol:

 

I just read that a Volume down, Volume Up, and a Power combo will turn most devices off when in a bootloop. Haven't tried it, so I'm not sure if thats an option

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...