belusnecropolis

Sierra Wireless EM9190.

Sure thing fren

lol it will not power on. Who knows it is new. Hello fren, I can help you. The LM960 may have to be put in USB 2 mode. AT#USBSWITCH=1 will do it. Do you have a sled you can use to talk to it with a PeeCee? They will be open again next week. Super pumped. I can reach out to one of their admin to make sure they have them.

EM20 is end of life so they will become rare over the next month or two. They have replaced it with the EM160-GR. I have one, it is a pretty sweet card. More will be coming off the boat over the coming weeks. I have been waiting since April for a second run engineering sample of the RM500 and RM510. They have been in customs for a week and *almost* were returned because the importer needed some info but I got em in time and should be here next week. I have built a bunch of routers with the RM500 and it is a great LTE performer so far. I would get one of those if you get the oppurtunity. I also have the Sierra Wireless EM9190 coming in tomorrow. Exciting times ahead.

I built a sub 6Hz 5G multi SIM hotspot that cost me less than a mid range 5G phone to hold me over. I can build a mmWave capable one for the cost of a mid range phone. If the radio in my 100 dollar Potatorola doesn't cut it for speed I just turn on wifi and then everyone around me has 5G access from multiple carriers. This also meets my needs for tracking, logging upgrades.

I just got a shipment of spicy new 5G radios and all I have are UDP voice & data and bucket IoT lines. I just wrote the radios to appear as an S20+ to see if I can get 5G access on my Voice UDP without getting throttled for being in an embedded modem. I don't know if they have a special APN. I still use just use cheap Motorola phones, they come with a some bloat if you get it from the carrier. I am too rough on a handset to spend on one of the nicer machines like iPhone or Samsung but they do appear to be very fast and powerful. Will you get the 5G iPhone this year that is expected? I believe DC has some deployed.

I think it is in settings, network and internet, APN config or something like this. I appreciate it, I am wondering if Sprint or T-mobile is using a specific APN for 5G access. Thanks! Sorry i am no help on your initial question.

Can I ask what your APN is?

PC's for People, Calyx and other EBS reseller subscribers are telling me they have lost the public IP address; that was the benefit of the routable APN. Mostly over the last few weeks and they will not be getting it back. If you have the option to add a public IP to your device plan and you find this service valuable I recommend you do so quickly. T-Mobile's availability of routable addresses is mostly limited to business plans and the pricing is downright outrageous.

I feel that I have a 5G Mobley.

Regular phone line. They waited until the merger to start the IMEI list. It is OK, I will have a fix for it soon similar to the sierra wireless IMEI rewrite. The home internet box has been IMEI locked out of the gate.

Did you try putting a visor over the box to deflect heat from the Sun?

I have seen consumer and business tablet UDP's get the nice no service error. I have a fren with some IoT bucket plans that is going to test one out later. Still crackalackin' on a fix.

I see a sportsball field, team colors?

LM960 got the IMEI boot from T-Mobile last week for UDP's. Working on a fix. Mergers are great!

You need me to send you some MHF4>SMA male?

G R I F T E R R A F T E R

Quectel, I try to avoid the network of acquisition agents on Alibaba. I pay more but they come when they say they will.

Have you experienced 5G yet on your handset since it is using T-mobile as mains?

S Y N E R G I E S

I sell them for 150 plus shipping. The proxicast is pretty sweet. Make sure to get the 5G model, it includes CBRS and the lower C-band going to auction this year.

I can ask about acquiring some. MHF4>SMA male? What length do you need and how many?

I made this thread for just that purpose. Yeah I did this first thing too. You need to solder to the board to complete externals. The U.FL connectors are only extensions of the MiMo antenna. This is correct. The RPi is kind of a turd for this unless you have it boot from a USB drive. Yes 4x MiMo at 3x aggregation pulls from 1.1-1.5 mA. Get you a thicc wall plug if you plan to pursue this more. Yeah I am the one that figured this out on this radio. It is a simple AT command, you just need the correct syntax and the IMEI from the Askey router. It is a great antenna. Medium gain but the ability to have a smaller footprint than 4 or 2 antenna. I get all of my MHF4 from LTEfix or another domestic supplier. Do you just need the correct connectors, N Male>LMR400>SMA male? I know a guy(me) if you need some. That antenna is light on the room but you would need to modify the internal connections to end in MFH4 to go from the antenna lead to the EM20. PoE is functional I always have ideas my living is building LTE routers and consulting so if you would like to communicate let me know when is a good time for you to talk later in the week.

Here is the stock email WebSalesTeam@symm.onmicrosoft.com Or this person, I get many emails from them all the time. Alex Guerra Internet Sales Representative AlexG@symmetryelectronics.com Office: 310.643.3454 Direct: 310.643.3455 Fax: 310.297.0881 Also, it ships from Beautiful Texas USA. The tariff is just what they already paid and they are passing it on to you. They should be able to void your order and process a new one. They have done it for me for this exact same reason. Another thing is they try to hide the cheapo USPS 3 dollar shipping at the bottom of the shipping page, keep an eye out for that and save some $$$

Shoot them an email, it takes them like 3 days to ship anything