Jump to content

ansars

S4GRU Member
  • Posts

    19
  • Joined

  • Last visited

Everything posted by ansars

  1. Now that I have a triband device, I am seeing LTE800 a lot. Pretty much anywhere that had LTE1900 now seems to have LTE800 as well. Mike/others can correct me if I am wrong, but if you look at the PCI value, and then look at the "Neighbor cells", a lot of times I will see the same PCI listed twice with 2 slightly different RSRP (strength) which, to me, would indicate that multiple frequencies were being broadcast. Once i get back to Boston which has LTE2500 I can check to see if i pick up the same PCI 3 times. Salman
  2. Mike, Glad to be of assistance. Will look forward to the update. It is interesting to me why this happens with RSRQ. I did not notice it (at least I dont think I did) while in Boston and last night at the hotel in Harrisburg I did not encounter the situation, which is why I could not send you a report yesterday. Here at work I am encountering it all the time. Could it be something from the tower? I think LTE800 is being rolled out here in the Shentel area and the tower closest to me is the last remaining one in Harrisburg that is still only 3G accepted so I am picking up LTE1900 and LTE800 from another tower so the signal fluctuates more. If you need any assistance in checking out your fix/update, I will be glad to test it out for you. As far as Wifi calling, do you know if the device is still trying to look for a Sprint signal? Even if it finds it, it will not be "using" it so would that cause battery drain especially in a poor reception area? Poor reception area would likely make you want to use Wifi calling anyway. Salman
  3. Mike, I did catch the phone doing the same thing this morning and I think I caught it in time to send the report. Let me know if you got anything, or if you want me to retry. Thanks
  4. Mike, Yeah I noticed that on wifi calling. I just uploaded that to show off the B41 speed I also have an airrave at home (which is where i took the screenshot of the speedtest). I am trying to see if the calls are better on the airrave or if i should stick to wifi calling at home.
  5. GalaxyGuy, Yes i noticed that too. However, this was interesting since i had a stable LTE connection for a while (this is in Harrisburg, PA). It seems to be doing it more here in Harrisburg than it was at home in the Boston area. Attached is a screenshot of B41 while at the gas station at Logan airport. 60+ Mbps is not bad
  6. Hey Mike, Great work on the app. I really appreciate your hard work on this. I have been using Signalcheck Pro since very early on and I use it as I travel quite a bit for work. Recently I have upgraded from the Note 3 to the Note 4 and I am noticing something strange. Every so often SignalCheck will report N/A even though I am connected to LTE (usually band 26). Most of the times I am not even connected to WifI, just to cellular network. I even ran a speedtest and it worked all while SignalCheck showed No connection as in the attached screenshot. I took the screenshot while the speedtest was in progress. I also used LTE Discovery and that shows the signal strength (similar to the Signal information under Settings/About Device/Status) Any thoughts on what could be happening? Thanks!
  7. Mike, I was also wondering about asu and rssi/rsrp. I have a sprint galaxy S3. I have actually noticed the asu number change even when then rsrp (as being reported by SignalCheck Pro) is steady. My phone is sitting right next to the window, and currently LTE is at RSRP of -103. However, the asu has been moving between 18 and 21 asu. According to the formula above asu should be at 37? Not sure if the 21 was an aberration, but seems like for the last few minutes, RSRP is between -102 and -103 and ASU is between 18 and 19, although the 18 and 19 numbers occur at -102 as well as at -103. The RSRP now dropped to -96 and asu is at 20. Salman
  8. Mike, Since you made your own reset function, can it be configurable as to which things it "resets"? Reason I am asking is that I reset it once and my bluetooth connection to the car was also reset. I also use Tasker (android automation app) for when I am connected to my car, so it restarted a whole bunch of things (such as restarting my google nav). Can it be customized so it only rests certain radios? Salman
  9. BY the way, it has the same grey background on my wife's galaxy s4. That phone is also rooted, but running standard sprint rom.
  10. Mike, I have a sprint galaxy s3, but it is running a custom rom and i have a black background. Not sure if the custom rom has anything to do with it. I can help you test it out if you like. Salman
  11. Hey Mike, Great work on the app. I have been using it for a while and purchased the pro version. I have the widget on the main screen and was wondering if the background could be made black, or user selectable? My background for the screen is black and the grey unused part of the widget sticks out a little bit. I would also like to say thanks for listening to the comments and replying! Thanks, Salman
×
×
  • Create New...