Jump to content

Network Vision/LTE - Missouri Market (includes St. Louis)


riddlebox

Recommended Posts

They are not going to launch the whole Missouri market at the same time. They haven't done this in any market to date. They certainly won't launch Columbia, but I could see the launching St. Louis and Jeff City next month. There is the required 40% POPs coverage in these cities. Jeff City in particular.

Did you see this? Still a long way to go.....

 

St. Louis Metro Area Percentages As of 9/15/2013

 

St. Louis City-NV Complete-28%-4G Complete-23%

St. Louis County-NV Complete-28%-4G Complete-27%

St. Charles County-NV Complete-25%-4G Complete-25%

Jefferson County-NV Complete 30%-4G Complete-23%

Madison County, IL-NV Complete 44%-4G Complete-38%

Jersey County, IL- NV Complete 100%-4G Complete 0%

St. Clair County, IL-NV Complete 28%-4G Complete-26%

Link to comment
Share on other sites

Do we have: 

An iPhone 5 or HTC User in:

St. Charles County

Kirkwood

Brentwood

N St. Louis City

S St. Louis City

Overland/Woodson Terrace

Oakville/Arnold

Belleville/Swansea

Jefferson City

Joplin

Branson

Northern Half of MO(North of I-70)

 

Samsung/LG/Moto/iPhone, etc Users in:

Belleville/Swansea

Jefferson City

Joplin

Branson

Northern Half of MO(North of I-70)

Kingshighway/Natural Bridge/Newstead

N St. Louis City

S St. Louis City

Springfield, MO

Between Rolla and Springfield on 44

South Central, MO

 

Or someone that commutes near these areas?

Everyone pm me the city your live in, work in, and what device you have.

 

Ill get a list going.

Link to comment
Share on other sites

I agree.

 

I just hope they don't launch anything until 800 is up and running all over. And seeing where we're at in the market priority list for 800 LTE rollouts (thanks, Robert!), I'm pretty sure they'll stick through the end of the year to see that through.

 

I am still confused on what "800" means. 

Link to comment
Share on other sites

I am still confused on what "800" means. 

800mhz was the Nextel band that was shutdown this summer. Sprint is repurposing this band for CDMA and LTE. The benefit of this band is it is more far reaching and has the ability to penetrate buildings. Along with Sprint converting Clearwire sites over to do WiMax and LTE. This will be Sprint Tri Band. Phones out now support CDMA voice over 800mhz but not LTE. Tri Band LTE devices will be out next month.

 

See this article for Sprint slides on how 800 should affect services.

 

http://www.androidpolice.com/2012/01/13/sprints-1900mhz-network-vision-is-nice-but-the-800mhz-rollout-will-drop-your-jaw/

Link to comment
Share on other sites

I am still confused on what "800" means. 

 

Sprint will be using the 800mhz spectrum to host cdma/LTE soon.  This spectrum was previously used by the nextel iDen network that was just shut down.  800mhz LTE should cover more area and be better for signal.

Link to comment
Share on other sites

Adorable!  I would love to contribute to our coverage map, but hoping to get my hands on a 5s soon and hearing that Sensorly will not work with it right away?  (Currently with a 4... which wouldn't help anyone besides being an expensive paperweight.)

Sensorly is not compatible with iOS because Apple decided apps could not be granted the permissions to gather the information needed to map. Go Android if you want to map!

Link to comment
Share on other sites

800mhz was the Nextel band that was shutdown this summer. Sprint is repurposing this band for CDMA and LTE. The benefit of this band is it is more far reaching and has the ability to penetrate buildings. Along with Sprint converting Clearwire sites over to do WiMax and LTE. This will be Sprint Tri Band. Phones out now support CDMA voice over 800mhz but not LTE. Tri Band LTE devices will be out next month.

 

See this article for Sprint slides on how 800 should affect services.

 

http://www.androidpolice.com/2012/01/13/sprints-1900mhz-network-vision-is-nice-but-the-800mhz-rollout-will-drop-your-jaw/

 

 

Sprint will be using the 800mhz spectrum to host cdma/LTE soon.  This spectrum was previously used by the nextel iDen network that was just shut down.  800mhz LTE should cover more area and be better for signal.

 

 

Gotcha.

 

So does that mean my Samsung Galaxy 4 won't be able take advantage of this?

Link to comment
Share on other sites

Gotcha.

 

So does that mean my Samsung Galaxy 4 won't be able take advantage of this?

It will be able to take advantage of 800CDMA but not 800LTE. The LG G2 will be the first one to be Tri-Band LTE and the iPhone 5s will be 800LTE and 1900LTE but no 2600LTE.

  • Like 1
Link to comment
Share on other sites

Sensorly is not compatible with iOS because Apple decided apps could not be granted the permissions to gather the information needed to map. Go Android if you want to map!

 

If only I enjoyed Android a bit more (I've only had experience with Gingerbread...) I'd be completely on board with it.  But I've never had an issue with my iPhone 4.  I'm torn now.

Link to comment
Share on other sites

So is 800 CDMA (isn't it actually 850?) just for HD voice or are there other uses?

Nope, that's the Cellular band which Apple has mistakenly been labeling as 800 for some time.

 

The SMR band is actually 800. And yes, 800 CDMA is primarily for voice, but can be a data path too if you can't pick up 1900 EVDO or LTE. It'll be slow, but still a data path. Data on that band takes a back seat to voice traffic, so more voice, slower data.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...