Jump to content

Network Vision/LTE - Boston Market (all of Massachusetts)


brendan4t

Recommended Posts

I work in Jamaica Plain, and just had an update from ICS to Jelly Bean pushed out to my Galaxy Nexus. Then saw a 4G pop up for the first time, don't know if it has been here all the time, or if 4G was just switched on with the upgrade. Speed Test confirms:7peb5.png

Link to comment
Share on other sites

I did this test while walking down Somerset Street heading toward Bowdoin Station on Cambridge Street. Still nothing on Beacon Hill though.

 

7980793555_fdb1491e1f_c.jpg

 

I also picked up a signal a couple times along Meridian Street in East Boston which is interesting because I usually have terrible reception on that street.

Link to comment
Share on other sites

I did this test while walking down Somerset Street heading toward Bowdoin Station on Cambridge Street. Still nothing on Beacon Hill though.

 

Beacon Hill's site hasn't been upgraded yet (located on top of whole foods, flat against the building). Seems like they have been working on it, they had a crane out over the weekend - looked like they were hauling up some new cabinets. Just waiting on new antennas and we'll be cookin.

Link to comment
Share on other sites

Here is what I am getting inside my building on corner of State and Congress (facing southeast), signal strength RSRP -113 RSRQ -11

 

Sent from my EVO using Tapatalk 2

 

That gives me hope that my home in Nevada will have usable LTE speeds when they finally finish Network Vision.

Link to comment
Share on other sites

I'm on Washington Street, Downtown Crossing at the moment and LTE is active. This is exciting!

 

ETA: Went about as far as Chelsea Street in Charlestown before switching back to 3G.

Edited by elena
  • Like 1
Link to comment
Share on other sites

New Bedford, MA yesterday. RT 140 and RT 6.

 

Sent from my EVO using Tapatalk 2

Bobby any news around RT 6 in Wareham? I see the tower as complete, but two weeks ago I wasn't even getting network vision speed, never mind LTE. I am talking RT 6 around 195 connector and twords Rose Point

 

Sent from my SPH-L710 using Tapatalk 2

Link to comment
Share on other sites

Bobby any news around RT 6 in Wareham? I see the tower as complete, but two weeks ago I wasn't even getting network vision speed, never mind LTE. I am talking RT 6 around 195 connector and twords Rose Point

 

Sent from my SPH-L710 using Tapatalk 2

 

No I dont know sorry, but did you see the post above yours? By 9-21 all completed towers should hopefully be turned on for use.

 

Bobby

Link to comment
Share on other sites

Are any of you Boston folks having to do any of the network change setting in the phone that the Atlanta people had to do when launch happened, or is it picking right up when you get in an area..
What changes you guys had to do?

 

Sent from my EVO using Tapatalk 2

Edited by megabiteg
Link to comment
Share on other sites

Some people in the initial roll out cities had to toggle the network setting from CDMA to CDMA.LTE or something like that. to get LTE to connect. Actually, now that I think about it, it may have only been EVO LTE owners.

Link to comment
Share on other sites

Some people in the initial roll out cities had to toggle the network setting from CDMA to CDMA.LTE or something like that. to get LTE to connect. Actually, now that I think about it, it may have only been EVO LTE owners.

 

Oh, well lots of people manually set their phones to CDMA only because they thought they they would get better battery life and signal strength by doing so. That's why when they lit up LTE in your area they had to switch back, because they had disabled the radio.

 

Sent from my EVO using Tapatalk 2

Link to comment
Share on other sites

How do i get to the Debug lte menu? Whats numbers do i need to type?

 

Go into your telephone dialer. Enter ##DEBUG#, and your Debug menu will open. Then select LTE Engineering. The RSRP is the actual LTE signal strength.

  • Less than -96dBm is a great signal
  • Between -97dBm and -107dBm is good
  • Between -108dBm and -114dBm is fair
  • More than -115dBm is poor

Robert

  • Like 1
Link to comment
Share on other sites

Picked up LTE tonight in Watertown. Grove Street heading towards the river / Cambridge. Almost 8mb down. 2.8mb up. Also, down by the Garden/North Station. Only 2.8mb down, 1mb up. Either way, I'm excited!

 

Sent from my Sprint Galaxy S3

  • Like 1
Link to comment
Share on other sites

Picked up LTE tonight in Watertown. Grove Street heading towards the river / Cambridge. Almost 8mb down. 2.8mb up. Also, down by the Garden/North Station. Only 2.8mb down, 1mb up. Either way, I'm excited!

 

Sent from my Sprint Galaxy S3

 

Nice thats great news I'm in Waltham. Now if only the city council would grant sprint the permits.

 

Sent from my Sprint Galaxy S3 using Tapatalk 2

  • Like 2
Link to comment
Share on other sites

Picked up LTE tonight in Watertown. Grove Street heading towards the river / Cambridge. Almost 8mb down. 2.8mb up. Also, down by the Garden/North Station. Only 2.8mb down, 1mb up. Either way, I'm excited!

 

Sent from my Sprint Galaxy S3

 

There is barely signal there. You are connecting to a tower over by quincy market, that's why speed is so slow.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...