Jump to content

Network Vision/LTE - Utah Market (Salt Lake City/Ogden/Provo/St. George/Cedar City)


Rafaelcab

Recommended Posts

Lately I agree with you. After LTE showed up around N. Temple and Redwood and a few other sites it was busy in here. Now it is quiet as a church. Maybe Sprint is completing a bunch of sites and then they will flip the switch to all of them at once.

Link to comment
Share on other sites

Lately I agree with you. After LTE showed up around N. Temple and Redwood and a few other sites it was busy in here. Now it is quiet as a church. Maybe Sprint is completing a bunch of sites and then they will flip the switch to all of them at once.

 

that would be freakin sweet :tu:

Link to comment
Share on other sites

I was at best buy sandy over the weekend adding a phone to our plan and the sales guy said something I wanted to get your opinion on. He said he knew of the live towers downtown sl and tremonton and Spanish fork he said it took the other carriers 6 months to fill in the lte towers in the area when you started to hear similar news. What do you think about that news?

Link to comment
Share on other sites

I was at best buy sandy over the weekend adding a phone to our plan and the sales guy said something I wanted to get your opinion on. He said he knew of the live towers downtown sl and tremonton and Spanish fork he said it took the other carriers 6 months to fill in the lte towers in the area when you started to hear similar news. What do you think about that news?

What I think is that some carriers do it differently than others, but in the case of t-mobile in the SLC market they went from zero to nearly full covered in like 2 months.  Not all towers are done but most areas have at least some coverage.  It's too bad Sprint couldn't do something similar.  Why was t-mobile able to pull that off?

Link to comment
Share on other sites

What I think is that some carriers do it differently than others, but in the case of t-mobile in the SLC market they went from zero to nearly full covered in like 2 months.  Not all towers are done but most areas have at least some coverage.  It's too bad Sprint couldn't do something similar.  Why was t-mobile able to pull that off?

http://s4gru.com/index.php?/topic/1704-frequently-asked-questions/?p=35684

Link to comment
Share on other sites

>tmo only had to add some hardware. Sprint is replacing everything and adding fiber backhual. That is a huge difference. Yes its a slow process but by this time next year thise who stuck it out will very pleased with there service and their lower monthly bill.

 

Sent from my rooted G Note 2 Using TapaTalk 4 Beta
 

Link to comment
Share on other sites

>tmo only had to add some hardware. Sprint is replacing everything and adding fiber backhual. That is a huge difference. Yes its a slow process but by this time next year thise who stuck it out will very pleased with there service and their lower monthly bill.

 

Sent from my rooted G Note 2 Using TapaTalk 4 Beta

 

Did they not have to do panels and cabinets as well?  Requiring permits and all the same stuff?  I read the link from njjdnt but it didn't address my question.  I'm starting to wonder if the pace is significantly based on cost controls.

Link to comment
Share on other sites

What I think is that some carriers do it differently than others, but in the case of t-mobile in the SLC market they went from zero to nearly full covered in like 2 months.  Not all towers are done but most areas have at least some coverage.  It's too bad Sprint couldn't do something similar.  Why was t-mobile able to pull that off?

Hopefully this will answer your question...So t-mobile started putting in fiber backhaul a few years ago and getting their network ready for this kind of thing (amazing job done by the CEO and other head honchos) Then when it came time to update their towers the backhaul was installed and all they had to do was put up equipment.  As you've seen in our market once stuff started happening equipment went up very quickly on many sites within the matter of 1 month we have seen a lot of equipment go up on many sites.  Yes they had permitting to do but they didn't have extra permitting and problems with backhaul to deal with.  Sprint is struggling because they figured they didn't need backhaul when everyone else was putting it in because of WiMAX and WiMAX used microwave instead of fiber backhaul so they are playing catch-up.  Also another thing to take into consideration is some of the other carriers don't update every single tower like sprint is doing.  They do a "blanket" effect and they don't update every tower.  So updating every tower and getting permits for it and running backhaul to every single tower takes time.  hope that helps.

Link to comment
Share on other sites

if i remember right illest is in w valley?

I hope they are working there. I live on the T-ville-West Valley border and my service has been total garbage since the first of last month. I have to walk out to 2200 w just to get enough signal to make a call. 

Link to comment
Share on other sites

Hopefully this will answer your question...So t-mobile started putting in fiber backhaul a few years ago and getting their network ready for this kind of thing (amazing job done by the CEO and other head honchos) Then when it came time to update their towers the backhaul was installed and all they had to do was put up equipment.  As you've seen in our market once stuff started happening equipment went up very quickly on many sites within the matter of 1 month we have seen a lot of equipment go up on many sites.  Yes they had permitting to do but they didn't have extra permitting and problems with backhaul to deal with.  Sprint is struggling because they figured they didn't need backhaul when everyone else was putting it in because of WiMAX and WiMAX used microwave instead of fiber backhaul so they are playing catch-up.  Also another thing to take into consideration is some of the other carriers don't update every single tower like sprint is doing.  They do a "blanket" effect and they don't update every tower.  So updating every tower and getting permits for it and running backhaul to every single tower takes time.  hope that helps.

 

 

thanks for the update! ive always wondered that also. damn T-Mo <_<

Link to comment
Share on other sites

Hopefully this will answer your question...So t-mobile started putting in fiber backhaul a few years ago and getting their network ready for this kind of thing (amazing job done by the CEO and other head honchos) Then when it came time to update their towers the backhaul was installed and all they had to do was put up equipment.  As you've seen in our market once stuff started happening equipment went up very quickly on many sites within the matter of 1 month we have seen a lot of equipment go up on many sites.  Yes they had permitting to do but they didn't have extra permitting and problems with backhaul to deal with.  Sprint is struggling because they figured they didn't need backhaul when everyone else was putting it in because of WiMAX and WiMAX used microwave instead of fiber backhaul so they are playing catch-up.  Also another thing to take into consideration is some of the other carriers don't update every single tower like sprint is doing.  They do a "blanket" effect and they don't update every tower.  So updating every tower and getting permits for it and running backhaul to every single tower takes time.  hope that helps.

This is great, thank you.  I did not know that wimax used microwave as primary backhaul.  I know that the other carriers do use microwave, but usually only when local backhaul is not practical.

Would it be safe to say that if there is a tower where other carriers have already had centurylink run fiber, that sprint could have CL splice off of that for them?  Meaning, are we more likely to see towers with other carriers on it with backhual, light up first?

Link to comment
Share on other sites

i asked a sub that question today....they were doing tmobile :td:  :td:   I was so excited...was driving by the tower and saw a lift :lol:  :lol:

 

came back by and chatted with them...t-mo... <_<  <_<  <_<

 

ruined my day

 

 

anyway...they had no idea...there was back haul brought in, because this was a site that had a guy working on it a few weeks ago i chatted with....and now i saw the "disturbed" dirt running from the street to the site......

 

lets hope that wasnt only t-mo

Link to comment
Share on other sites

i asked a sub that question today....they were doing tmobile :td:  :td:   I was so excited...was driving by the tower and saw a lift :lol:  :lol:

 

came back by and chatted with them...t-mo... <_<  <_<  <_<

 

ruined my day

 

 

anyway...they had no idea...there was back haul brought in, because this was a site that had a guy working on it a few weeks ago i chatted with....and now i saw the "disturbed" dirt running from the street to the site......

 

lets hope that wasnt only t-mo

Which site was this?  The one at the top of 2nd north? The one by the Smith's in Farmington?

Edited by dmplus
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...