Jump to content

Phone swap question


schmidtj

Recommended Posts

I want to swap a iPhone 6S for an iPhone 7 on one of my existing lines.
If I keep the 6S powered on and the 7 powered off and enter the proper IMEI and ICCID on the
Sprint Activate screen for the iPhone 7 will the existing 6S remain active until I power on the 7
or will the 7 take over the 6S' phone number immediately?

I'd like to stage the swap but don't want it to actually happen immediately.

J

 

Link to comment
Share on other sites

I want to swap a iPhone 6S for an iPhone 7 on one of my existing lines.
If I keep the 6S powered on and the 7 powered off and enter the proper IMEI and ICCID on the
Sprint Activate screen for the iPhone 7 will the existing 6S remain active until I power on the 7
or will the 7 take over the 6S' phone number immediately?
I'd like to stage the swap but don't want it to actually happen immediately.
J
 
You'll be in an inconsistent state. LTE will stop working immediately and switch to the new SIM. CDMA I believe will be stuck on the old one until it's powered off. Or at least it will prevent the 7 from completing setup or using CDMA until it is.

I don't remember if the 6s or 7 use eCSFB or SRLTE, but either way you'll likely have CDMA issues as well.

Sent from my Pixel 4 XL using Tapatalk

  • Like 1
Link to comment
Share on other sites

Thank you. 
I thought it might work the way I wanted because on at least one occasion I purchased a new iPhone direct from Apple. Before it arrived I displayed the phone in my sprint and it showed the new phone while the old phone still worked.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Fury Gran Coupe (My First Car - What a Boat...)
    • Definite usage quirks in hunting down these sites with a rainbow sim in a s24 ultra. Fell into a hole yesterday so sent off to T-Mobile purgatory. Try my various techniques. No Dish. Get within binocular range of former Sprint colocation and can see Dish equipment. Try to manually set network and everybody but no Dish is listed.  Airplane mode, restart, turn on and off sim, still no Dish. Pull upto 200ft from site straight on with antenna.  Still no Dish. Get to manual network hunting again on phone, power off phone for two minutes. Finally see Dish in manual network selection and choose it. Great signal as expected. I still think the 15 minute rule might work but lack patience. (With Sprint years ago, while roaming on AT&T, the phone would check for Sprint about every fifteen minutes. So at highway speed you could get to about the third Sprint site before roaming would end). Using both cellmapper and signalcheck.net maps to hunt down these sites. Cellmapper response is almost immediate these days (was taking weeks many months ago).  Their idea of where a site can be is often many miles apart. Of course not the same dataset. Also different ideas as how to label a site, but sector details can match with enough data (mimo makes this hard with its many sectors). Dish was using county spacing in a flat suburban area, but is now denser in a hilly richer suburban area.  Likely density of customers makes no difference as a poorer urban area with likely more Dish customers still has country spacing of sites.
    • Mike if you need more Dish data, I have been hunting down sites in western Columbus.  So far just n70 and n71 reporting although I CA all three.
    • Good catch! I meant 115932/119932. Edited my original post I've noticed the same thing lately and have just assumed that they're skipping it now because they're finally able to deploy mmWave small cells.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...